Keller Swiss-Built Series 23/25 Piezoresistive pressure transmitters absolute-, gauge- and differential pressure
These piezoresistive transmitters have been designed for precision applications in industrial environments for pressures ranging from 0,2 to 1000 bar, liquids or gas.
Series 23: Male pressure port
Series 25: Flush diaphragm
A Complete Range Absolute, barometric, gauge (over- and underpressure) and differential for wet/wet applications.
13 nominal pressure ranges. Current or voltage output. Flexibility A modular concept uses the selection of off-the-shelf capsules, allowing a customised production. Numerous options and variants are available, fully adapted to the customer’s requirements: Mechanical and electrical interface, ports, signal outputs, materials in media contact, oil filling, oxygen-compatibility, special features, flameproof versions…Reliability / Quality These transmitters use the highly stable KELLER Series 10 capsules, proven in millions of applications throughout the world. Each capsule is subjected to severe tests and calibration procedures. The transmitters are manufactured and tested according to ISO 9001 / EN 29001.The type of the transmitter is defined according to the reference pressure:
PAA-23/25 Absolute Pressure Transmitter (Zero at 0 bar abs.)
PA-23/25 Sealed Gauge Pressure Transmitter (Zero at ≈ 1 bar abs.)
PR-23/25 Vented Gauge Pressure Transmitter (Zero at atmospheric)
PD-23 Differential Pressure Transmitter (wet / wet)
SPeCiFiCAtionS
Pressure Ranges (FS) in Bar
PR-23/25 -1 -0,5 -0,2 0,2 0,5 1 2 5 10 20
PD-23 0,2 0,5 1 2 5 10 20
PAA-23/25 0,2 0,5 1 2 5 10 20
PA-23/25 1 2 5 10 20 50 100 200 400 600 1000
Overpressure -1 -1 -1 2,5 2,5 3 4 10 20 40 100 200 300 600 900 1100
Overpressure Ref.-Side PD 1 1 2 3 5 7 10
PD, static line pressure 200 bar max.
Linearity
(1)
+ Hysteresis + Repeatability ± 0,2 %FS typ. ± 0,5 %FS max.
(1)
best straight line, based zero
Storage-/Operating Temperature -40…100 °C
Compensated Temperature Range -10…80 °C
Temperature Coefficients… …of Zero, in %FS/°C …of Sensitivity, in %/°C
· Range > 1 bar 0,005 typ. 0,01 max. 0,02 max.
· Range 1 bar 0,010 typ. 0,02 max. 0,02 max.
· Range 0,5 bar 0,015 typ. 0,03 max. 0,02 max.
· Range 0,2 bar 0,025 typ. 0,05 max. 0,02 max.
Stability
· Range > 2 bar 0,1 %FS typ. 0,2 %FS max.
· Range ≤ 2 bar 1 mbar typ. 2 mbar max.
Signal Output / Type 4...20 mA / 2-Wire 0...20 mA / 3-Wire 0...10 V / 3-Wire
Supply 8...28 VDC 10...28 VDC 13...28 VDC
Load Resistance (RΩ) (U - 10 V) / 0,02 A (U - 5 V) / 0,02 A > 5 k
Electrical Connection - Plug DIN 43650
- Cable (with reference tube for gauge)
Volumetric Change < 0,1 mm3
Pressure Connection See drawings front page
Material in Media Contact Stainless steel 316L (DIN 1.4435), Viton®
Protection IP65
Weight PR/PA/PAA: ≈ 180 g. PD: ≈ 440 g
Insulation > 100 MΩ@50 V
Endurance > 10 million cycles 0…100 %FS at 25 °C
Frequency Response 1 kHz (5 kHz option)
options
Pressure Connection, Electrical Out On request; many possibilities
Pressure Ranges Other pressure ranges between 0,2 and 1000 bar, diff. units
Linearity. Specifications ± 0,1 and ± 0,2 %FS or any customer requirement
Materials in Contact with Media Many possibilities
Oil Filling Fluorized oil (O2-compatible), olive-oil, low temperature oil
Hazardous Applications Flameproof- and intrinsically safe version
Protection IP67, IP68 (cable version)
Higher Static Line Pressure up to 600 bar (PD only)
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
