Highlights

High reliability micro-capacitance silicon cell
Long Term stability: +/- 0.1% URL / 10 Years
Static Pressure to 1035 Bar (15000psi) on dp ranges (see below: "High Static DPTransmitter")
High accuracy, up to +/-0.04% of calibrated span (0.065% as standard)
Versatile indicator with push button programming
Exceptional resistance to harsh environments
Hart® 5.2 multi-drop communication
Field repair possible with common spare parts
Built-in loop calibration facility
Large installed base

The Fuji Electric FCX-AII V5 series of differential pressure transmitters use a silicon micro-capacitance cell proven on thousands of difficult applications.Typically Fuji Electric transmitters are installed in harsh environments on oil pipelines, power

stations, gas compressor stations, water treatment plants and steel plants.They have European, American, Russian and Chinese approvals. Field repair is

possible using only one amplifier for all pressure transmitter types. Suitable for installation in hazardous areas as Exia (intrinsically safe) of Exd (explosion

proof) transmitters.

Common Specifications
Diaphragm materials	SS316L, hastelloy-C, monel, tantalum, zirconium, titanium, double coated with gold and ceramic
Elevation/suppression	-100 to +100%URL
Span measuring range	100 to 1/100 URL
Liquid contacting temperature	-40 to 120ºC
Ambient temperature	-40 to 85ºC
Output signal / Allowable load resistance	DC 4 to 20mA / 600 Ohm
Supply voltage	DC 10.5 to 45V
Long-term stability	±0.1% URL/10 years
Explosion-proof specification	Flameproof, intrinsic safety type
Mounting method	50A pipe mounting, direct mounting
Weight	2.9Kg (standard unit)

Differential Pressure (flow) transmitter
Type	FKC (or FKD with remote seal)
Measuring span	1/6/32/130/500/3000/20000 kPa
Maximum static pressure	2/10/16/30/42 MPa
Measuring accuracy	Up to ±0.04% Standard: ±0.065%

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: