Kaneko solenoid valve manual reset M31 SERIES

M31 SERIES

Feature

Can be used even with a pressure differential of zero as main and pilot valves are directly connected to each other.
Pressure losses are small as nominal size is equal to seat size.
Products certified for high-pressure gas services are also available.
Designed so that the valve after once actuated does not change its state unless it is manually reset.

Precautions

Install the valve with the solenoid upward with respect to horizontal piping (permissible angle of inclination is within 30 degrees to the vertical).
Limited flow directions (align with the arrow indicating the flow direction).
Limited flow directions (align with the arrow indicating the flow direction).
Remove air through vent valve in cases where the working fluid is a liquid.
Do not paint external moving parts.

Standard specification

FLUID: GAS , LIQUID , STEAM
WORKING PRESSURE: See below
FLUID TEMPERATURE: As for working temperature you can select any KANEKO model no. that will have different inner construction. The using temperature is available form 5deg.C to 200deg.C.
AMBIENT TEMPERATURE: －20℃ ～ 40℃(But to be used within the range of fluid dose not frozen.)
VISCOSITY OF FLUID: 250cst or lose
DUTY CYCLE: 100% CONTINUOUSLY RATED
OPERATING VOLTAGE RANGE: ＋10％，－15％
ELECTRICAL SPECIFICATIONS: See below

WORKING PRESSURE

BODY MATERIAL	CONNECTION TYPE	NOMINAL DIAMETER	PRESSURE
BODY MATERIAL	CONNECTION TYPE	NOMINAL DIAMETER	0～1.0MPa	0～1.6MPa	0～2.0MPa	0～3.0MPa
JIS , BRONZE	SCREWED	15 ～ 25A	WORKING PRESSURE RANGE
	SCREWED	32A	WORKING PRESSURE RANGE
	FLANGED	15 ～ 25A	WORKING PRESSURE RANGE
		32A	WORKING PRESSURE RANGE
		40A，50A	WORKING PRESSURE RANGE
STAINLESS STEEL	SCREWED FLANGED	15A ～ 25A	WORKING PRESSURE RANGE
STAINLESS STEEL	SCREWED FLANGED	40A，50A	WORKING PRESSURE RANGE

ELECTRICAL SPECIFICATIONS

AC			DC
V/Hz	INRUSH A	HOLDING A	V	A
			COIL INSULATION CLASS : B
100/50	9.0	0.55	24	2.0
100/60	9.5	0.65	48	1.0
110/60	8.5	0.50	100	0.6
200/50	5.5	0.30	110	0.4
200/60	6.0	0.33	125	0.45
220/60	5.0	0.27

Product Image

M31 – 15 ～ 32 – A44、AE44-BS TYPE

NOMINAL DIAMETER	V:FUNCTION RC/TC	V:FUNCTION RD/TD	MOUNTING LENGTH	H
15	210	160	80	288
20	210	160	90	298
25	210	160	100	298
32	210	160	130	303

M31 – 15 ～ 32 – D44-BS TYPE

NOMINAL DIAMETER	V:FUNCTION RC/TC	V:FUNCTION RD/TD	MOUNTING LENGTH	H
15	210	160	80	338
20	210	160	90	348
25	210	160	100	348
32	210	160	130	353

M31 – 15 ～ 32 – DE44-BS TYPE

NOMINAL DIAMETER	V:FUNCTION RC/TC	V:FUNCTION RD/TD	MOUNTING LENGTH	H
15	210	160	80	340
20	210	160	90	350
25	210	160	100	350
32	210	160

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue