Parker MINIATURE SOLENOID VALVES Series 1 and 2 - Miniature Inert PTFE Isolation Valve

Parker's series 1 and 2 families of Miniature PTFE isolation valves provide an inert wetted path ideal for biocompatibility and aggressive liquids.
Product Overview
Description
The 2-Way & 3-Way inert Series 1 & 2 valves have been designed for systems where chemical compatibility is most important. The wetted path is isolated from the solenoid and only Teflon® (PTFE) and borosilicate glass are in contact with the media passing through the valve. Low internal volume and fast response time ensure repeatable, accurate volumes. Valves will actuate without any pressure or vacuum applied.

Performance Characteristics
Typical Applications  Solvent management for Liquid Chromatography, Highly aggressive media dispensing and control 
Valve Type  Diaphragm Isolation 
Vacuum to Pressure Range  24" Hg to 20 psi (1.38BAR) 
Orifice Sizes Available  0.060" (1.52mm) 
Wetted Materials: Body  PTFE 
Wetted Materials: Diaphragm/Armature  PTFE, Borosilicate Glass(Series 1 only) 
Valve Configuration Type  2/3 Way Normally Closed 
Leak Rate  Bubble Tight 
Response Time  <12 msec 
Mounting Style (integration)  1/4 - 28 
Dimensions: Width  1.0" (25.4mm) 
Dimensions: Height  2.1" (53.34mm) 
Dimensions: Length  1.0" (25.4mm)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: