Two-position, SPST Actuator - 44 lb-in, Spring Return , 24 Vac ±-10%, 60 Hz
(0)2-10Vdc,Floating Actuator - 44 lb-in, Spring Return , 24 Vac ±-20%, 50/60 Hz
(0)2-10Vdc,Floating Actuator - 88 lb-in, Spring Return , 24 Vac ±-20%, 50/60 Hz
Two-position, SPST Actuator - 175 lb-in, Spring Return , 24 Vac ±-20%, 50/60 Hz
(0)2-10Vdc,Floating Actuator - 175 lb-in, Spring Return, 24 Vac ±-20%, 50/60 Hz
Product Specifications
- Application
- HVAC
- Dimensions (in.)
- 9.72 in high x 3.94 in wide x 2.95 in deep
- Dimensions (mm)
- 247 mm high x 100 mm wide x 75 mm deep
- Includes
- Mounting bracket, self-centering shaft adapter, 3mm crank
- Weight (lb)
- 6 lb
- Weight (kg)
- 2.72 kg
- Materials
- Aluminum housing, Plenum rated plastic access cover
- Comments
- Integral 1/2 in. NPSM conduit connection.
- Mounting
- Direct Coupled
- Frequency
- 60 Hz
- Approvals, Underwriters Laboratories Inc.
- UL873, Plenum Rated
- Customer Special
- Kele
- Electrical Connections
- Enclosed screw terminal strip (22 to 14 AWG)
- Operating Humidity Range (% RH)
- 5 to 95% RH, non-condensing
- Supply Voltage
- 24 Vac ±20%
- Power Consumption
- Driving-- 14 VA, Holding-- 6 VA
- Shipping and Storage Temperature Range (F)
- -40 F to +158 F
- Shipping and Storage Temperature Range (C)
- -40 C to +70 C
- Approvals, CE
- 89/336/ECC, 73/23/EEC
- Approvals, Canadian Underwriters Laboratories Inc.
- cUL C22.2 No. 24-93
- Ambient Temperature Range (F)
- -40 F to +140 F
- Ambient Temperature Range (C)
- -40 C to +60 C
- Approvals, C-Tick
- N314
- Environmental, Electrical or Ingress Protection Rating
- NEMA 2
- Internal Auxiliary Switch
- 0
- Maximum Noise Rating
- Driving (dB(A) @ 1m)-- 40; Holding (dB(A) @ 1m)-- 20 (no audible noise)
- Stroke
- 95 ±3 degrees
- Shaft Dimensions (in.)
- 3/8 to 1.06 in. round or 3/8 to 11/16 in. square
- Actuator Type
- Damper
- Control Signal
- SPST; Two position
- Fail Safe Mode
- Spring Return
- Torque Rating (lb-in.)
- 44 lb-in.
- Torque Rating (Nm)
- 5 Nm
- Spring Return Torque/Force (lb-in., lbf)
- 44 lb-in.
- Spring Return Torque/Force (Nm, N)
- 5 Nm
- Additional Torque Ratings (lb-in.)
- Maximum Stall-- 75 lb-in.
- Additional Torque Ratings (Nm)
- Maximum Stall-- 8.5 Nm
- External Auxiliary Switches Available
- Yes
- Rotational Stroke Adjustment
- Mechanically limited 5 degree increments
- Timing, Nominal
- Driving @ 60 Hz-- 90 sec
- Spring Return Timing
- Maximum-- 20 sec
- Shaft Adapter Type
- Self-centering clamping
- Manual operation
- Manual crank
- Shaft Dimensions (mm)
- 10 to 27 mm round or 10 to 18 mm square
- Spring Return Direction
- By orientation
