MAC proportional pressure control PQE and pressure control system Series MPP

OPERATIONALBENEFITS
1. Fast response.
applications.
2. Long life.
3. High flow.
4. The use of a digital command signal brings
easy installation and use.
5. A compact and lightweight unit saves room
and installation costs.
6. This system is the alternative to proportional
valves if more than six pressures or closed
loop feedback are not required.
7. The Multi-Pressure Pak
is easy to set up and
maintain.
8. For 2, 3 or 4 ported weld guns and other

9. Accuracy of 2.5 % of full scal

TECHNICALDATA
Min. supply pressure :
25 PSI (1.7 BAR)
Max. supply pressure :
150 PSI (10 BAR)
Pressure output range :
25-120 PSI (1.7 to 8 BAR)
Voltages available    AC :
120/60, 110/50
DC :
12 & 24 volt. 1.8 to 12.7 watts
Other AC and DC
Consult factory
voltages available :
Air supply :
40 micron filtration
Lubrication :
Not required but if lubrication is used, a medium aniline point oil is recommended
NOTE: Pressures shown are minimum and maximum safe working pressures.
*Series Port size Flow
82 1/4" - 3/8" C 0.9 / 900 Nl/Min
v
93 3/8" - 1/2" C 2.4 / 2400 Nl/Min
v
6300 3/8" - 1/2" C 2.1 / 2100 Nl/Min
v
6500 1/2" - 3/4" C 3.5 / 3500 Nl/Min
v
ISO 1 1/4" - 3/8" C 1.1 / 1100 Nl/Min
v
ISO 2 3/8" - 1/2" C 2.1 / 2100 Nl/Min
v
ISO 3 1/2" - 3/4" C 5.0 / 5000 Nl/Min
v

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: