MAC proportional pressure control PQE and pressure control system PPC5C

OPERATIONALBENEFITS
1. Reliable operation, using two MAC 34 Series
with balanced poppet.
2. Fast response.
3. Long life.
4. High flow.
5. Low power consumption.
6. Rugged enclosure.
7. Not affected by vibrations.
8. Accurate pressure control.
9. Can be stand alone or used in combination
with our remote air sandwich regulators.
10. Analog command signal and output.

GENERALDATA
Ambient temperature :32°,F to 120°,F/0 to 50
LED indicators :Red : power on - Green : pressure achieved
Enclosure :Aluminium, sealed
Vibration :Not affected
Port size :G 1/8°±, 1/8°± NPT - Option : bottom por Micro or mini 3, 5 or 6 pin plug-in
Connector :3, 4, 5 or 6 wire grommet
Mounting :Any plane
Protection :IP 65

ELECTRICALDATA
Supply voltage :20.4 to 26.4 VDC
Supply current :50 to 275mA (single transducer)， 50 to 500mA (dual transducer)
Command signal :0 to 10V or 4 to 20mA
Command type :Single-ended or differential
Input impedance :4.99 k °1.0% (voltage， 316  °?0.1% (current
Analog Monitor Signal (AMS) :0 to 10 Volts
Logic Monitor Signal (LMS) :TTL or 24V 10mA max. (sinking)
EMI/RFI protection :Common mode and high frequency noise reduction for electrical inputs

PNEUMATICDATA
Inlet pressure* :
160 PSI max (for 0-150 PSI output pres.)
10.7 BAR max (for 0-10 BAR output pres.)
120 PSI max (for 20-117 PSI output pres.)
8 BAR max (for 1.3-7.8 BAR output pres.)
Inlet vacuum** :25°± HG/635 mm H
Output vacuum :0 to 20°± HG/0 to 508 mm H
Fluids :Compressed air or inert gases
Lubrication :Not required. However, if used, a medium aniline point oil is recommended
Output pressure :
0 to 2, 4, 10, 15, 20, 30, 50, 60, 100, 117, 150 PSI  (single transducer)
0 to 0.13, 0.26, 0.66, 1, 1.3, 2, 3.3, 4, 6.7, 7.8, 10 BAR (single transducer)
0 to 50, 60, 75, 80, 90, 100, 117, 150 PSI (dual transducer)
0 to 3.3, 4, 5, 5.3, 6, 6.7, 7.8, 10 BAR (dual transducer)
Overall accuracy :
1.5% full scale (single transducer standard
1.0% full scale (dual transducer
0.5% full scale (single transducer optional
2.5% full scale (single transducer optional
Flow :Cv 0.07/70 Nl/min (standard) - Cv 0.09/90 Nl/min (High flow)3  
Minimum closed end volume :(Flow = 70 Nl/min)
1.0 cubic inch (Cv = 0.07) - 16 cm

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: