Honeywell Solenoid valves for hot water, steam, up to 180 degree LGK-series Flange connection L40G31FK

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations

up to 120°C or 180°C. The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close without difficulty even without pressure or with low differential pressures

DN size mm: 40

Kvs value: 34

Static pressure: PN25

Working range bar: 0…12

Connections: flange

Technical data

Type：2/2-way

Operating mode： normally closed

Type of construction： Piston-type solenoid valve, coupled, no minimum differential pressure required TÜV-tested to DIN 32730

Type test approval mark (DIN reg. no.) see Product Summary

Materials：Casing: Bronze Rg 5 to DIN 1705

Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel

Sealing materials：Piston: Teflon (PTFE).

Nozzle: Cone made of stainless steel.

Static seal: EPDM

Mounting position： Standard version: Solenoid system preferably upright. Horizontal，mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not hang downwards. Outdoor installations fr = suitable for outdoor use

Ambient temperature： 4°C to +60°C Temperature of medium，120°C/180°C maximum

Working pressure： See Product Summary

Flanges To DIN 2501 Part 1

PN 40 for DN 15–32

PN 25 for DN 40/50

Recommended weld-on flange

PN 40 to DIN 2635

Maintenance

The valve should be operated 5-10 times per month to prevent

the piston from sticking. No further maintenance is required.

Temperature of medium 120°C maximum

15 4.0 0–25 G 1/2“ L15G31M L15G31F 1F02204