Buschjost solenoid valve without differential pressure Norgren solenoid valve Series 82530/82630
2/2-way valves DN 10
For neutral gases and liquids
Solenoid actuated, with forced lifting
Diaphragm valves
Internal threads G 1/4 to G 1/2 or 1/4 NPT to 1/2 NPT
Operating pressure 0 to 10 bar
Description (standard valve)
Solenoid valve for e.g. air, water, oil and other neutral fluids
Switching function: normally closed
Flow direction: determined
Fluid temperature: ¨C10 ! up to max. +90 !a
Ambient temperature: ¨C10 !aC up to max. +50
Mounting position: optional, preferably solenoid
vertical on top
Material
Body: Brass (CW617N), PA 66
Seat seal: NBR
Internal parts: Stainless steel, PVDF
For contaminated fluids insertion of a strainer is recommended (see B accessories).
FeaturesSuitable for vacuumFunctional designCompact solenoid with integrated core tubeValve operates without differential pressureOperating pressure 0 - 20 bar with alternating current and NBR sealing
Characteristic data
Valves
Nominal Dia- Operating Pres-
Part Number Connection size Valve length kv-value ** Weight
meter sure *
3
(mm) max. (bar) (Base m /h) (kg)
(mm) min. (bar)
8253000.8001 G 1/4
10 44 0 10 1.50 0.50
8263000.8001 1/4 NPT
8253100.8001 G 3/8
10 44 0 10 1.70 0.50
8263100.8001 3/8 NPT
8253200.8001 G 1/2
10 60 0 10 1.70 0.60
8263200.8001 1/2 NPT
2
* for gases and liquid fluids up to 25 mm /s (cSt)
** C -value (US) !O -value x 1.2
v v
State voltage [V] and frequency [Hz]
Further options (valves)Solenoid 8001
XXXXX03.XXXX Seat seal FPM, Standard voltage
for fuel and oil,
DC 1 AC 2 AC 2
max. fluid temperature +110 !a
50 Hz 60 Hz
XXXXX14
.XXXX Seat seal EPDM,
24 V 24 V ¨
for hot water,
¨ 110 V 120 V
max. fluid temperature +110 !a
¨ 230 V 220 V
XXXXX18
.XXXX Degreased version, seat seal FPM
Design acc. to DIN VDE 0580
Voltage range !à10
XXXXX22.XXXX Operating pressure 0 up to 20 bar,
100 % duty cycle
only for NBR and AC solenoid
Protection class acc. to EN 60529 IP65
XXXXX51
.XXXX Seat seal HNBR,
Socket Form A acc. to DIN EN 175301-803 (included)
for hot water and steam,
operating pressure 0 ¨C 6 ba
Power Consumption
fluid temperature 0 !aC up to max. +150 !
According to DIN VDE 0580 at coil temperature
of +20 !aC. In operation the power consumption of the sol-
On request Further versions
noid decreases by approx. 30 %.
Accessoires: - body with fastening thread 2x M5
AC 2
Solenoid DC 1
Inrush Holding
Further options (solenoids)
8001 12 W
XXXXXXX.8004 DC solenoid with rectifier for AC only
8001 20 VA 20 VA
XXXXXXX.8041 Protection class
Attention!
x II 2 GD EEx me II T3 T 140 !a
The conditions imposed on the Ex approvals lead to reduc-
On request Further versions
tion of the permissible standard temperature ranges in the
cases of explosion protected solenoids.
Part Number Connection size B H H1 L SW T
meter
(mm) (mm) (mm) (mm) (mm)
(mm)
8253000.8001 G 1/4 12.0
10 14 87 73 44 21
8263000.8001 1/4 NPT 10.0
8253100.8001 G 3/8 12.0
10 14 87 73 44 21
8263100.8001 3/8 NPT 10.0
8253200.8001 G 1/2 15.0
10 14 90 74,5 60 27
1/2 NPT 13.0
8263200.8001
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
