Burkert valve Neutral gaseous media Type 0331 - Direct acting pivoted armature solenoid valve
3/2-way Solenoid Valve, sub-base
3-way solenoid valve with pivoted armature
and manual override
Direct-acting with separating diaphragm
Fast-acting
For liquid, gaseous and aggressive Medium
Long service life, even in non-lube conditions
Technical data
DN 2.0C3.0 m
Ori ce
Brass and stainless steel 1.4401
Body and seat materials
Epoxy
Coil material
H
Coil insulation class
NBR, FKM (EPDM on request)
Seal material
Neutral Medium such as compressed air, water,
Medium
hydraulic oil
NBR
Hot air
FKM
Oil and fat-free Medium
EPDM (on request)
Medium temperature
0 to +80 !
NBR
0 to +90 !
FKM
C 30 to +90 !
EPDM (on request)
Max. +55 !C (min. temperature see Medium tem
Ambient temperature
perature)
2
/s
max. 37 mm
Viscosity
!10
Voltage tolerance
100% continuous rating
Duty cycle
Use reduced duty cycle or 5W coil
Manifold mounting
Tag connector acc. to DIN EN 175301-803 Form A
Electrical connection
(previously DIN 43650) for cable plug Type 2508
(supplied as standard)
IP 65 with cable plug
Protection class
as required, preferably with actuator upright
Installation
Ordering chart for valves (other versions on request)
Item no. per voltage/frequency [V/Hz]
1)
/h]
3
Kv-value water [m
ACDC
Circuit function Port connection DN [mm] Pressure Pressure [bar] Weight [g] 024/DC 024/50 230/50
C 3/2-way valve NC
Seal material, NBR
2.00.100.080-16 041 183041 184041 188
Flange 400
3.00.150.120-10041 195041 198041 209
D 3/2-way valve NO
Seal material, NBR
2 (B)
2.00.100.080-16 041 234041 235041 242
Flange 400
1(P)3 (R)
3.00.150.120-10041 247041 248041 254
T 3/2-way valve,
Seal material, FKM
universal function,
Flange2.00.100.080-12400124 953124 954124 956
any ow direction
3.00.150.120-8 124 958124 959124 961
4)
In DC-versions with ori ce 3.0 and 4.0 the ori ce diameter is reduced by about 0.5mm. Please be aware that the above valves cannot be used for vacuum
The valves are manufactured with different springs. The valves can be applied also in other circuit functions with respect to different pressure rates.
For further information please see separate datasheet.
5
Materials Pressure
0
Stainless steel body Vacuum version
bar
Approvals Additional
UL, UR, GL, CGA/AGA, UL Hazardous Locations Electrical feedback, version without manual override
Voltage
110/50, coil with 5W power consumption, non-standard voltages
Ordering chart for flange valve manifolds and accessories
All manifolds made of anodised aluminium
Manifold Length A [mm] Hole spacing B [mm] Item no.
1 valve 32 005 043
2 valves 69 005 045
3 valves 106 37 005 366
4 valves 143 74 005 294
5 valves 180 111 005 295
6 valves 217 148 005 296
7 valves 254 185 005 403
8 valves 291 222 006 074
Accessory parts
Block for auxiliary manual operation, individual 013 372
Covering plate for unused valve positions 005 625
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
