POSITION FEEDBACK CYLINDERS
Available for pneumatic (TDP) and hydraulic (TDH) service. The TD Option gives you an internal Linear Resistive
Transducer (LRT) for extremely accurate piston position sensing . It is ideal for applications where magnetic Reed and
Hall effect switches are not acceptable. The TD Option is the perfect solution for applications where variations in cylinder
stroke and speed are required or where an application calls for real time position monitoring. Offered in bore sizes from
1-1/8" to 4" and strokes up to 18". Cylinder comes standard with an IP 67 rated 8mm 3 pin male cable connector.
TDH and TDP Standard cylinder construction differs depending on bore size, for instance 1-1/8” and 1-1/2” bore sizes
have an aluminum threaded rear head with an aluminum snap-ring construction front head the 2” thru 4” bore have our
traditional Snap-Ring construction front and rear. All bore sizes utilize stainless steel cylinder tubing with the exception of
the 4” bore which uses heavy wall brass tubing.
TDP Type “C” Cylinders are constructed using low friction “U”- Cup Seals and include a wear strip on the piston. These Cylinders are primarily used on low pressure applications and where low minimum breakaway is required. Pressure Rating: 120 PSI. Pneumatic only. Breakaway: Approximately 2 to 3 PSI. Bore Sizes Available: 1-1/8”, 1-1/2”, 2”, 2-1/2”, 3” & 4”. |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
