actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories
Home » AVSA1-1/8" X4 AAS 120/60 #109

AVSA1-1/8" X4 AAS 120/60 #109

AVSA1-1/8" X4 AAS 120/60 #109
TYPE AVSA

A continuous electrical contact is required to fully extend the rod, which will remain extended until the
electrical contact is broken. An external force is required to return the rod to its original position. A 1/8”
N.P.T. port is provided in the front head to permit the return of the rod by means of a separate air supply
when required. This port can also be used to install a Flow Control Valve to control forward speed.
Standard stroke lengths are whole inch increments from 1" through 20” and 1/2", 1-1/2", 2-1/2"
and 3-1/2" . Special strokes available from 1/8” to 80” maximum.
TYPE AVSR ROD NORMALLY RETRACTED
A continuous electrical contact is required to fully extend the rod, which will remain extended until the
electrical contact is broken. An internal spring will return the rod to its fully retracted position.
SPRING FORCE: 17 LBS. AT REST, 40 LBS. FULL STROKE.
Standard stroke lengths are whole inch increments from 1" through 10” and 1/2", 1-1/2", 2-1/2" & 3-1/2”.
Special strokes available from 1/4” to 10” maximum.
TYPE AVSRR ROD NORMALLY EXTENDED
A continuous electrical contact is required to fully retract the rod, which will remain retracted until the
electrical contact is broken. An internal spring will return the rod to its fully extended position.
SPRING FORCE: 17 LBS. AT REST, 40 LBS. FULL STROKE.
Standard stroke lengths are whole inch increments from 1" through 10” and 1/2", 1-1/2", 2-1/2"
and 3-1/2". Special strokes available from 1/4” to 10” maximum.
Most common AC & DC Voltages are available. 12, 24,120 & 240/60 and 6, 12 & 24VDC
are standard. Maximum operating pressure - 150 P.S.I.
A continuous electrical contact is required to fully extend the rod, which will remain extended until
the electrical contact is broken, at which time the spring will return the rod to its fully retracted
position. This action can be reversed by using the optional PE adapter as the air inlet. 		Most common AC & DC Voltages are available. 12, 24,120 & 240/60 and 6, 12 & 24VDC
are standard. Maximum operating pressure - 150 P.S.I.
A continuous electrical contact is required to fully extend the rod, which will remain extended until
the electrical contact is broken, at which time the spring will return the rod to its fully retracted
position. This action can be reversed by using the optional PE adapter as the air inlet.
 
TYPE AVSM - 1/2”
Standard stroke lengths in 1/2” increments to 4”.
Spring Force:
20 oz. retracted.
40 oz. extended.
 
 
TYPE AVSM - 3/4”
Standard stroke lengths in 1” increments to 4”.
Spring Force:
2 Ibs. retracted.
7 Ibs. extended.
 
TYPES AVSM- 1-1/8”
AVSMS- 1-1/8” Standard stroke lengths in 1” increments to 4”.
Spring Force:
AVSM AVSMS
3 6– 1/2 lbs. retracted
6 13 lbs. extended
 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Continue
Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site