Huba pressure transmitter

The type 400 pressure transmitter, with its  proven ceramic lever technology, has  adjusted temperature compensated sensor  signals and is available with a voltage output. The (VDC) voltage output is an amplified, linear  signal suitable for direct processing in electronic control systems. The sensors are ideal for continuous level measurement in washing machines, dishwashers etc.  Robust construction, sensor element  has no contact with media  Special design developed for large  scale manufacture at an attractive price  Fully automated manufacture,  including in-line adjustment of zero  point and full scale value  Special snap mounting bracket for easy  single handed mounting in sheet steel  of varying thicknesses Technical Overview 1) Pressure range Relative     0 ... 10  100 mbar Operating conditions Medium      Liquids and neutral gases     Medium / ambient    0 ... +70 ¨¤ Temperature     Storage -10 ... +70 ¨¤ Tolerable overload    200 mbar Rupture pressure   

The pressure transmitter of type 501 with proved ceramic technology, features adjusted and amplified sensor signals which are available as standardised current outputs. Various application-specific pressure and electrical connections can be provided.  Compact construction  Automated manufacture in large quan-  tities for ideal price / performance ratio  Robust ceramic sensor technology  High resistance to extreme temperatures  No mechanical creepage Technical overview Pressure range Relative     -1 ... 0  60 bar Absolute      0 ... 2.5  16 bar Operating conditions Medium     Liquids and gases     Medium / ambient -15 ... +80 ¨¤ Temperature     Storage -40 ... +80 ¨¤   Tolerable overload    2 x fs (max. 80 bar) Repture pressure    3 x fs (max. 90 bar) Materials Case     PA6    Sensor Ceramic Al O  (96%) 2 3 Materials in contact with the medium    Pressure connection Stainless steel 1.4305 / AISI 303     Sealing material FPM,

The relative pressure transmitter type 503 with proved ceramic technology features, adjusted and amplified sensor signals which are available as standardized voltage outputs. Designed for large batch production in OEM applications.  Partial automatic production, giving  ideal price / performance ratio. Ideal for use as a control element,  owing  as a result of a small hysteresis Incorporates all the benefits of ceramics  technology for industrial applications Technical overview Pressure range Relative     0 ... 2.5  25 bar Operating conditions Medium     Liquids and neutral gases     Medium   +2 ... +90 ¨¤C Temperature    Ambient +10 ... +60 ¨¤       Storage  -30 ... +85 ¨¤ Overload admissible    2 x fs Rupture pressure    3 x fs (max. 50 bar) Materials  ABS for cover with connector RAST 2.5  ABS Housing material   PA 6 for cover with connector DIN or cable  PA 6    Sensor Ceramic Al O  (96%) 2 3 Materials in contact with the medium    Pres

The pressure transmitters of type 505 are measuring components for the measurement of pressure. They are suitable for analysing water pressure ratios in heating- and industrial circuits. The novel ceramic measuring element with its included electronic gives a calibrated, amplified voltage signal. Designed for large batch production in OEM applications.   Best price / performance ratio through:   electronic integrated in measuring element   optimised mounting concept   automatic production Ideal for use as a control element,  owing to small hysteresis The measuring element includes the  well proven ceramic technology of  Huba Control AG. Technical overview Pressure range Relative      0 ... 4 bar Operating conditions Medium      Liquids and not aggressive gases     Medium   +2 ... +90 !a Temperature    Ambient   +2 ... +85 !a     Storage  -30 ... +85 !a Tolerable overload     8 bar Rupture pressure     12 bar Materials Case      Plastic therm

The type 506 with proven ceramic technology, features adjusted and  amplified sensor signals which are available as standardised current outputs. The pressure sensors are specially developed for use in the industrial refrigeration technology.  Compact construction Automated manufacture in large  quantities for ideal price /  performance ratio Robust ceramic sensor technology High resistance to extreme temperatures No mechanical creepage Technical overview Pressure range Relative    -0.5 ... 7 bar / 0 ... 10  60 bar Operating conditions Medium    Refrigerants    Medium / ambient -40 ... +80 ¨¤ Temperature    Storage -40 ... +80 ¨¤   Tolerable overload   2 x fs (max. 80 bar) Repture pressure   3 x fs (max. 90 bar) Materials Case    PA6, red   Sensor Ceramic Al O  (96%) 2 3 Materials in contact with the medium   Pressure connection Stainless steel 1.4305 / AISI 303    Sealing material CR (chlorine caoutchouc) Electrical overview 1)  Output Power supply Load  Current consumption  supply volt

These compact OEM pressure transmitters type 510 have been developed for applications in the industrial refrigeration technology.  The special sensor is based on thick-film technology, developed by Huba Control, which utilises a special grade of steel welded to the pressure sensor. This means that the 510 can be used for all gases and media in refrigeration, including ammoniac. Highest requirements concerning EMC and accuracy for all temperature ranges can be met in combination with the unique integrated electronic design.   Compact, rugged construction for  highest operational reliability Welded with no elastomer seals Negligible temperature influence on  accuracy Excellent EMC-capacity Saving cable mounting time with swift  connector Technical overview Pressure range Relative      0... 2.5  600 bar Operating conditions Medium      Liquids, gases and refrigerants (incl. ammonia)      Medium -40 ... +150 ¨¤C Temperature     Ambient -40 ...   +85 ¨¤      Storage -40 ...   +85 ¨¤      &

These compact OEM pressure transmitters type 511 meet the highest specification for mechanical stress, EMC compatibility, and operational reliability, which means that this range is particulary suitable for all demanding industrial applications.  This sensor utilises a ceramic technology, developed by Huba Control and for the last 20 years, in millions of applications, used in combination with unique integrated electronic design, means that the type 511 series has a high degree of accuracy for all temperature ranges.  These units are available in small or production quantities, with an excellent price to performance ratio.  Compact, rugged construction for highest operational reliability  No media egress when exceeding rupture pressure  Negligible temperature influence on accuracy  Excellent EMC capacity  Saving time by quick cable mounting by the customer with swift connector Technical overview 1)  Version until +150 ÀC on request 2)  higher overload and rupture pressure on request 3)  at nominal pressure Pressure range Relative     -1 ... 0 ă 600 bar Absolute   &

These compact OEM pressure transmitters type 515 meet the high est specification for mechanical stress, EMC compatibility, and operational reliability. This sensor utilises a ceramic technology, developed by Huba Control and for the last 10 years, in millions of applications. Used in combination with unique integrated electronic design, means that the type 515 series has a high degree of accu racy for all temperature ranges. These units are available in small or production quantities, with an excellent price to performance ratio.  Compact, rugged construction for  highest operational reliability  Negligible temperature influence on accuracy  Excellent EMC capacity Technical overview Pressure range Relative     -1 ... 0 ă 600 bar Absolute      0 ... 25 bar Operating conditions Medium      Liquids Temperature     FPM -15 ... +125 ÀC     EPDM -25 ... +125 ÀC     NBR -25 ...   +85 ÀC     FPM spec. -40 ... +150 ÀC     Ambient max.     +85 ÀC Tolerable overload / repture

This pressure transmitter is based on ceramic technology, developed by Huba Control and used for the last 20 years, in millions of applications. Used in combination with a unique integrat­ed electronic design, this gives the type 516 series a high degree of accuracy for all temperature ranges. This technology with an amplified ratiometric output signal, supports direct assembly without the need for the user to adjust for temperature or pressure.   Integrated amplifier electronics  No customer specific adjustment necessary  Excellent EMC  capacity by reinforcement on measuring cell  Easy and quick fitting on PCB  Negligible temperature influence on accuracy Technical overview Accuracy Pressure range Relative     -1 ... 0 ă 16 bar Absolute     0 ... 1 ă 16 bar Barometric sensor    0.8 ... 1.4 bar Operating conditions Medium      Liquids and gases Temperature *    Medium / ambient   NBR -25 ... +80 ÀC     FPM spec. -30 ... +80 ÀC    Storage   in packaging -40 ... +65 ÀC   &nbs

The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded. This pressure transmitter meets the high burst protection demands and is suitable for the use in all types of refrigerants inclusive ammonia. Compact, rugged construction Welded without sealing parts, no   elastomer seals Saving time by quick cable mounting by the customer with swift connector Large selection of connections available. Technical overview Pressure range Relative     -1 ... 9 bar / 0 ... 2.5 ă 600 bar Operating conditions Medium     Liquids, gases and refrigerants (incl. ammonia) Temperature     Medium -40 ... +135 ÀC     Ambient -30 ...   +85 ÀC     Storage -50 ... +100 ÀC Tolerable overload    < 6 bar 5 x FS     > 6 bar 3 x FS (max. 1500 bar) Rupture pressure    < 6 bar 10 x FS     > 6 bar 6 x FS (max. 2500 bar) Materials Pressure Connection   Stainless steel 1.4404 / AISI 316L (inside thread Schrader 1.4305 /

The compact type 528 pressure transmitter is based upon the well proven ceramic technology developed by Huba Control over 20 years ago. These pressure transmitters are suitable for applications across a broad spectrum of industries. Compact, rugged construction Negligible temperature influence on accuracy Saving time by quick cable mounting by the customer with swift connector Large selection of connections available Technical overview Pressure range Relative     -1 ... 0 ă 60 bar Absolute     0 ... 1 ă 16 bar Operating conditions Medium      Liquids and gases Temperature        Medium FPM -15 ... +125 ÀC      EPDM -40 ... +125 ÀC      NBR -20 ... +100 ÀC      MVQ -40 ... +125 ÀC     Ambient   -30 ...   +85 ÀC     Storage   -50 ... +100 ÀC Tolerable overload / Rupture pressure    < 4 bar 3.0 x fs     > 4 bar 2.5 x fs Materials Pressure connection   Stainless steel 1.4404 / AISI 316L Plug acco

The pressure transmitters of type 680 with piezoresistive measuring elements have compensated, adjusted and amplified sensor signals which are available as standard voltage or current outputs. The transmitter housing is available with various pressure and electrical connections. Manufactured from stainless steel, its welded construction provides a watertight seal. With its sophisticated building block system, individual designs to meet specific applications are possible. Effective overload protection due to chemically eteched chip diaphragm and  specially designed glass gland Fast and affordable customer specific solutions due to building block system, even for small quantities Compact construction with SMD technology enhances operational reliability in the presence of shock and vibration Welded construction provides 100%  sealing against media Relative and absolute    0 ... 25 bar Overpressure      > 25 ... 1000 bar Overload At Pressure ranges 0.1 ... 2 bar    3x pressure range, min. 3 bar At Pressure ranges > 2 ... 600 bar    3x pressure rang

The pressure transmitter of type 691 with unique and for the last 20 years used in millions of applications ceramic technology, features adjusted and amplified sensor signals which are available as standardized voltage or current outputs. Various application-specific pressure and electrical connections can be provided. Very low temperature sensitivity High resistance to extreme temperatures No mechanical creepage Individual applications due to modular system Pressure range Relative     -1 ... 0 ă 600 bar Absolute     0 ... 0.1 ă 16 bar Operating conditions Medium      Liquids and gases Temperature 1)     Medium / ambient  -15 ... +80 ÀC      -40 ... +80 ÀC (on request)     Storage -40 ... +80 ÀC Tolerable overload    2x fs (max. 1000 bar) Rupture pressure    3x fs (max. 1200 bar) Materials Case     Aluminium Materials in contact with the medium   Pressure connection Stainless steel 1.4305 / AISI 303 or PVDF     Sensor Ceramik Al2O3 (96%)     Sealin

The compact type 522 pressure transmitter for shipbuilding is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully welded. The pressure measuring cell incorporates a fully welded construction within the transducer housing. Highest requirements in various applications concerning burst can be met. All pressure transmitters of type 522 have the most important certifications for the shipbuilding industry. Compact, rugged construction Certified  for shipbuilding with:  - Germanischer Lloyd  - American Bureau of Shipping  - Bureau Veritas  - Det Norske Veritas  - Lloyd`s Register Pressure range Relative     0 ... 2.5 ă 600 bar Operating conditions Medium     Liquids, gases and refrigerants (incl. ammonia) Temperature     Medium -40 ... +135 ÀC     Ambient -30 ...   +85 ÀC     Storage -50 ... +100 ÀC Tolerable overload    < 6 bar 5 x FS     > 6 bar 3 x FS (max. 1500 bar) Rupture pressure    < 6 bar 10 x FS     > 6 bar   6

The compact type 527 pressure transmitter is based upon the well proven ceramic technology developed by Huba Control over 20 years ago. These pressure transmitters are suitable for applications across a broad spectrum of industries and shipbuilding. Compact, rugged construction Negligible temperature influence on accuracy Certified  for shipbuilding with:  - Germanischer Lloyd  - American Bureau of Shipping  - Bureau Veritas  - Det Norske Veritas  - Lloyd`s Register Pressure range Relative     0 ă 60 bar Absolute     0 ... 1 ă 16 bar Operating conditions Medium      Liquids and gases Temperature        Medium FPM -15 ... +125 ÀC      EPDM -40 ... +125 ÀC      NBR -20 ... +100 ÀC     Ambient   -30 ...   +85 ÀC     Storage   -50 ... +100 ÀC Tolerable overload / Rupture pressure    < 4 bar 3.0 x fs     > 4 bar 2.5 x fs Materials Cover     Stainless steel 1.4404 / AISI 316L Plug