Huba Pressure sensor 501

The pressure transmitter of type 501 with proved ceramic technology, features adjusted and amplified sensor signals which are available as standardised current outputs. Various application-specific pressure and electrical connections can be provided.
 Compact construction  Automated manufacture in large quan-
 tities for ideal price / performance ratio  Robust ceramic sensor technology  High resistance to extreme temperatures  No mechanical creepage

Technical overview
Pressure range
Relative     -1 ... 0  60 bar
Absolute      0 ... 2.5  16 bar
Operating conditions
Medium     Liquids and gases
    Medium / ambient -15 ... +80 ¨¤
Temperature
    Storage -40 ... +80 ¨¤
 
Tolerable overload    2 x fs (max. 80 bar)
Repture pressure    3 x fs (max. 90 bar)
Materials
Case     PA6
   Sensor Ceramic Al O  (96%)
2 3
Materials in contact with the medium    Pressure connection Stainless steel 1.4305 / AISI 303
    Sealing material FPM, EPDM, NBR, MVQ
Electrical overview
1)
 Output Power supply  Load  Current consumption 
Supply voltage - 8 V
 4 ... 20 mA   8.0 ... 33 VDC  <  [Ohm] < 20 mA
0.02 A
2 wire
Supply voltage - 10 V
 4 ... 20 mA 10.0 ... 33 VDC  <  [Ohm] < 20 mA
0.02 A
 0 ...   5 V    9.0 ... 33 VDC  > 10 kOhm / < 100 nF <   5 mA
 1 ...   6 V  10.4 ... 33 VDC  > 10 kOhm / < 100 nF  <   5 mA
3 wire
 0 ... 10 V  16.2 ... 33 VDC  > 10 kOhm / < 100 nF <   6 mA
 ratiom. 10 ... 90% 5 VDC 5%  > 10 kOhm / < 100 nF <   3 mA
Polarity reversal protection            Short circuit proof and protected against polarity reversal. Each connection is protected against crossover up to max. supply voltage.
Dynamic response
Response time     <   5 ms
Load cycle     < 50 Hz
Protection standard
IP 65
Electrical connection
Cable 1.5 m
Connector DIN EN 175301-803-A
Connector DIN EN 175301-803-C (mini DIN)
Connector M12x1
Pressure connection
Inside thread     G ? mit O-Ring sealing
       -18 NPT
     G , sealed at back, DIN 3852 form E
Outside thread     R ? DIN 2999
     G , sealed at back and manometer (combi)
     G , sealed at back and manometer (combi)
Installation arrangement
Recommened: Pressure connection downwards
Tests / Admissions
Electromagnetic compatibility    CE conformity acc. EN 61326-2-3
Weight
With inside thread    ~   95 g
With ouside thread    ~ 110 g
With cable 1.5 m additional    ~   40 g
 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: