Smar Concentration DT302 Foundation Fieldbus Density Transmitter
The DT302 Foundation Fieldbus Density Transmitter is an instrument developed for the continuous, online measurement of liquid concentration and density, directly in the industrial process. Its pioneer technology consists of a capacitive type differential pressure transmitter coupled to a pair of pressure repeaters immersed in the process.
A temperature sensor located between the two pressure repeaters is used to compensate the temperature variations in the process fluid. A dedicated software, by means of an algorithm, calculates the fluid density. Depending on the industrial process, density may be expressed in Brix degree, Gay-Lussac degree, Baumé degree, Plato degree, concentration, etc. The DT302 is a Foundation Fieldbus product.
Input Range 1: 0.5 to 1.8 g/cm³
Range 2: 1.0 to 2.5 g/cm³
Range 3: 2.0 to 5.0 g/cm³
Communication FOUNDATION Fieldbus on 31.25 kbit/s voltage
mode according to IEC 61158-2
Accuracy Range 1: ±0.0004 g/cm³ (±0.1 °Bx)
Range 2: ±0.0007 g/cm³
Range 3: ±0.0016 g/cm³
Power Supply Bus powered: 9-32 Vdc.
Quiescent current consumption: 12 mA
Function Blocks Up to 20 Dynamically Instantiable Function Blocks.
Click here for the list of available Function Blocks
The Function Blocks available allow simple and complex control strategies to be placed inside the field device, making the field device an integral part of the control system. In order to fully benefit from the Function Blocks in the device a True Foundation Fieldbus system is recommended.
For more information about SYSTEM302, click here.
Indication 4 ½-digit numerical and 5-character alphanumerical LCD indicator
Wetted Parts 316 SS or Hastelloy
Temperature Limits Ambient: -40 to 85 °C (-40 to 185 ºF)
Process: -20 to +150ºC (-4 to 302ºF)
Static Pressure Limit 70 kgf/cm² (7MPa) (1015 PSI)
Ambient Humidity Limits 0 to 100% RH
Process Connection Industrial model: 316 SST flange ANSI B16.5
Sanitary mode: 304 SST Tri-clamp
Hazardous Area Certification Explosion proof, weather proof and intrisically safe
Mounting Side or Top Mounting
Weight Sanitary model: 8 kg - Industrial model: 14 kg
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
