ABB pressure transmitter Multivariable Transmitters

The multivariable transmitters in the 266CRH with remote diaphragm seals calculates the mass flow for gases, vapours and liquids with dynamic flow compensation directly from the three process variables of differential pressure, absolute pressure and temperature. They are used for differential pressure flow measurements. Apart from pressure- and / or temperature-dependent changes to the density of the fluid, the parameters such as the discharge coefficient, thermal expansion of pipelines and primary device and the Reynolds number are also corrected. It can also be used for DP level measurement if density compensation is necessary due to process temperature changes. This could make any level measurement much more reliable. In addition to high precision, the multivariable 266 also offers the advantage that only a single device needs to be used for the measuring point instead of several transmitters and a flow calculator. Accuracy: ±0.075 % Reduced process penetrations save money and reduce the risk of leakage High static working pressure option (41 MPa, 6000psi) for power plants, pipelines or oil and gas production Local operation with LCD with TTG (Through The Glass) tec

The multivariable transmitters in the 266CRT with remote diaphragm seals calculates the mass flow for gases, vapours and liquids with dynamic flow compensation directly from the three process variables of differential pressure, absolute pressure and temperature. They are used for differential pressure flow measurements. Apart from pressure- and / or temperature-dependent changes to the density of the fluid, the parameters such as the discharge coefficient, thermal expansion of pipelines and primary device and the Reynolds number are also corrected. It can also be used for DP level measurement if density compensation is necessary due to process temperature changes. This could make any level measurement much more reliable. In addition to high precision, the multivariable 266 also offers the advantage that only a single device needs to be used for the measuring point instead of several transmitters and a flow calculator. Accuracy: ±0.04 % Reduced process penetrations save money and reduce the risk of leakage High static working pressure option (41 MPa, 6000psi) for power plants, pipelines or oil and gas production Local operation with LCD with TTG (Through The Glass) tech

The multivariable transmitters in the 266CSH calculates the mass flow for gases, vapours and liquids with dynamic flow compensation directly from the three process variables of differential pressure, absolute pressure and temperature. They are used for differential pressure flow measurements. Apart from pressure- and / or temperature-dependent changes to the density of the fluid, the parameters such as the discharge coefficient, thermal expansion of pipelines and primary device and the Reynolds number are also corrected. It can also be used for DP level measurement if density compensation is necessary due to process temperature changes. This could make any level measurement much more reliable. In addition to high precision, the multivariable 266 also offers the advantage that only a single device needs to be used for the measuring point instead of several transmitters and a flow calculator. Accuracy: ±0.075 % Reduced process penetrations save money and reduce the risk of leakage High static working pressure option (41 MPa, 6000psi) for power plants, pipelines or oil and gas production True draft range (down to 0.05 kPa, 0.2inH2O) transmitter Local operation with LCD

The multivariable transmitters in the 266CST calculates the mass flow for gases, vapours and liquids with dynamic flow compensation directly from the three process variables of differential pressure, absolute pressure and temperature. They are used for differential pressure flow measurements. Apart from pressure- and / or temperature-dependent changes to the density of the fluid, the parameters such as the discharge coefficient, thermal expansion of pipelines and primary device and the Reynolds number are also corrected. It can also be used for DP level measurement if density compensation is necessary due to process temperature changes. This could make any level measurement much more reliable. In addition to high precision, the multivariable 266 also offers the advantage that only a single device needs to be used for the measuring point instead of several transmitters and a flow calculator. Accuracy: ±0.04 % Reduced process penetrations save money and reduce the risk of leakage High static working pressure option (41 MPa, 6000psi) for power plants, pipelines or oil and gas production True draft range (down to 0.05 kPa, 0.2inH2O) transmitter Local operation with LCD w

In addition to high precision, the multivariable 266 also offers the advantage that only a single device needs to be used for the measuring point instead of several transmitters which reduces purchase and installation cost and increases reliability due to fewer devices and less wiring. Accuracy: ±0.075 % Reduced process penetrations save money and reduce the risk of leakage High static working pressure option (41 MPa, 6000psi) for power plants, pipelines or oil and gas production Local operation with LCD with TTG (Through The Glass) technology without the need of opening the housing Exchangeable electronics with automatic configuration capability Flexible process connections and high selection of corrosion resistant material due to all welded diaphragm seals  

The multivariable transmitter 266JRT with remote diaphragm seals is able, thanks to multisensor technology, to measure differential pressure, absolute pressure and temperature of liquid, vapour and gas. Temperature is measured via an external RTD. In addition to high precision, the multivariable 266 also offers the advantage that only a single device needs to be used for the measuring point instead of several transmitters which reduces purchase and installation cost and increases reliability due to fewer devices and less wiring. Accuracy: ±0.04 % Reduced process penetrations save money and reduce the risk of leakage High static working pressure option (41 MPa, 6000psi) for power plants, pipelines or oil and gas production Local operation with LCD with TTG (Through The Glass) technology without the need of opening the housing Exchangeable electronics with automatic configuration capability Flexible process connections and high selection of corrosion resistant material due to all welded diaphragm seals

The multivariable transmitter 266JSH is able, thanks to multisensor technology, to measure differential pressure, absolute pressure and temperature of liquid, vapour and gas. Temperature is measured via an external RTD. In addition to high precision, the multivariable 266 also offers the advantage that only a single device needs to be used for the measuring point instead of several transmitters which reduces purchase and installation cost and increases reliability due to fewer devices and less wiring. Accuracy: ±0.075 % Reduced process penetrations save money and reduce the risk of leakage High static working pressure option (41 MPa, 6000psi) for power plants, pipelines or oil and gas production True draft range (down to 0.05 kPa, 0.2inH2O) transmitter Local operation with LCD with TTG (Through The Glass) technology without the need of opening the housing Detection of plugged impulse lines Exchangeable electronics with automatic configuration capability

The multivariable transmitter 266JST is able, thanks to multisensor technology, to measure differential pressure, absolute pressure and temperature of liquid, vapour and gas. Temperature is measured via an external RTD. In addition to high precision, the multivariable 266 also offers the advantage that only a single device needs to be used for the measuring point instead of several transmitters which reduces purchase and installation cost and increases reliability due to fewer devices and less wiring. Accuracy: ±0.04 % Reduced process penetrations save money and reduce the risk of leakage High static working pressure option (41 MPa, 6000psi) for power plants, pipelines or oil and gas production True draft range (down to 0.05 kPa, 0.2inH2O) transmitter Local operation with LCD with TTG (Through The Glass) technology without the need of opening the housing Detection of plugged impulse lines Exchangeable electronics with automatic configuration capability