Anderson pressure transmitter

Anderson's newest sanitary pressure transmitter improves upon the solid performance of the standard HA by allowing the device to be autoclaved in place. Improved enclosure integrity and tighter accuracy and stability will make this the transmitter of choice in both autoclave and critical applications.  Response Time:   200 uSec Output:   4-20 mA DC, 2 wire Accuracy:   !à 0.4% of full scal Repeatability:   !à 0.2% of full scal Hysteresis:   !à 0.10% of full scal

Sanitary pressure gauges and transmitters that can be installed on lines as small as 1/2" without the need for adapters or reducers, without creating pockets or "dead legs", and without sacrificing performance.  

Anderson's newest sanitary pressure transmitter is specifically designed for critical measurements in fractional size lines. This product replaces the two piece fractional transmitter with a very compact, single piece transmitter. Excitation: 10-40 VDC (Absolute), 24 VDC Nominal regulated or unregulated. Output: 4-20 mA DC, 2 wire with non-interrupting circuit verification test points Loop Resistance: 0-700 ohms at 24 VDC Wiring Connection: 16 AWG max.; Screw Terminal; Accessible via removable screw cap conduit housing Recommended Cable: 22-24 AWG, foil shielded, and PVC coated.(3/16 - 1/4 OD insulation) Accuracy: 0.5% of Full Scale Repeatability: 0.3% of full scale Hysteresis: 0.25% of full scale Linearity:0.10% of full scale Stability:.25% of calibrated range/6 months Storage Temperature:-40 to 149F (-40C to 65C) Process Temperature Limits: 30 to 300F (-1C to 149?C) (Horizontal Mount recommended over 275F) Ambient Temperature Limits:40 to 120 F (4 to 49?C) Effect of Temperature Change: 0.1 psig/10F typical Over-Range Rating:2 times base range Wetted Parts:316L stainless steel electropolished  (R  max. = 8 microinches, .2 mic

A 3-A compliant stainless steel diaphragmed version of our ultra low profile series. The HH is ideal for preassembled skids destined for the wet environments found in dairies, beverage and food processing facilities. Excitation:   10-40 VDC (Absolute), 24 VDC Nominal   Response Time:   200 uSec     regulated or unregulated Wetted Parts:   316L stainless steel Output:   4-20 mA DC, 2 wire with non-interrupting       (Ra max. = 25 microinches, 0.6 microns) Housing Material:  304 stainless steel Loop Resistance:  0-700 ohms at 24 VDC Span Adjustment:   !à 50% of range, except 15 psi !à1 Wiring Connection:  5 pin M12 Quick Disconnect Receptacle Zero Adjustment:  10% Recommended Cable: Mounting:   Direct connection     (4-8mm (0.16-0.31!±) cable sheath OD) Standards:    Designed and manufactured to sound  Accuracy:   !à 0.5% of full scal     engineering practices in accordance with  Repeatability:   !à 0.3% of full scal     Article 3.3 of the PED 97/

A member of Anderson’s Next Generation Platform, the MPF Food/Beverage/Dairy pressure transmitter provides a fully modular design, internal diagnostic display, and superior environmental protection. State of the Art performance delivers accuracy to 0.1% of calibrated range with class leading stability. Broadly configurable, 24 v DC,Loop powered (2 wire) 4 – 20 mA output with available HART 7.0 Performance mechanical & electrical: Calibrated Accuracy:   !à 0.10% of calibrated range up to 5:1 turndow   (!à 0.15% if over 5:1 turndown Repeatability:   0.05% as calibrated Long Term Stability:   0.2% URL for 2 years Process Temperature Effect:  !à 0.1 psi/10!aF (5.5!aC) typi Ambient Temperature Effect:  !à 0.1 psi/10!aF (5.5!aC) typi Over-Range Capability:   30/100/500 psi stem:     1.5x URL no effect on accuracy     2x URL to failure   1000 psi stem:     1.1x URL no effect on accuracy     1.25x URL to failure Response Time:   <100 Milliseconds Sampling Rate:   <50 Milliseconds Damping:   Menu adjustable Range T

Designed specifically for the needs of the Life Science market the MPP Pharmaceutical Series Pressure Transmitter provides state of the art performance in a superior sanitary package. Developed from Anderson’s Next Generation Modular Platform the MPP delivers class leading performance while providing the benefits of a modular architecture, assembled in an ASME –BPE compliant design. The MPP is 24 v DC, Loop powered (2 wire) 4 – 20 mA output with HART 7.0 Performance mechanical & electrical:   connector enVironmental:     source construction / finish: aPProVals and documentation Warranty:    

The Anderson SR offers not only a new low profile design, but may be ordered with built-in LCD indication. Excitation:9-32 VDC (Absolute), 24 VDC Nominal, regulated or unregulated 14-37 VDC (Absolute) with display Output:4-20 mA DC Loop Resistance:0-750 ohms at 24 VDC 0-1050 ohms at 30 VDC Indication:Optional, 3 1/2 digit, .5" high LCD, cap mounted Accuracy: 0.5% of span, full scale, for standard ranges, ranges below 0-50 psig 1% full scale; all compound and psia ranges, 1.5% full scale Over-Range Rating:2 times base range Stability:  0.3% of calibrated range/6 months Storage Temperate:-40 to 150?F (-40 to 65?C) Zero and Span Adjustment:  10% of range Repeatability:  .3% Hysteresis:  .2% Process Temp. Range:20? to 225?F (up to 300?F if horizontal mount) Process Temp. Effect:Less than 0,2% of full scale output/10?F change Ambient Temp. Operating Range:0? to 120?F (-17.8? to 48.9?C) Storage Temperature:-40? to 149?C (-40? to 65?C) Mounting:Direct connection Housing Material:304 Stainless Steel Wetted Parts:316L Stainless Steel standard; Hasteloy "C" diaphragm optional Surface Finish (wetted parts):R  = 25 microinches (.6 microns)

The Anderson SV Pharmaceutical Series Pressure Transmitter offers not only a new low profile design, but may be ordered with built-in LCD indication. Excitation:9-32 VDC (Absolute), 24 VDC Nominal, regulated or unregulated 14-37 VDC (Absolute) with display Output:4-20 mA DC Loop Resistance:0-750 ohms at 24 VDC 0-1050 ohms at 30 VDC Indication:Optional, 3 1/2 digit, .5" high LCD, cap mounted Accuracy: .5% of span, full scale, (for standard ranges) (Includes Hysteresis,  1.0% of span, full scale, (for ranges below 0-50 psig, Repeatability, and Linearity)and all compound/psia ranges) Over-Range Rating:2 times base range Stability:  0.3% of calibrated range/6 months Storage Temperate:-40 to 150F (-40 to 65?C) Zero and Span Adjustment:  10% of range Repeatability:  .3% Hysteresis:  .1% Linearity ? .1% -6.7 to 135?C (up to 163C if horizontal mount) Process Temp. Range:20 to 275?F (up to 325F if horizontal mount) Process Temp. Effect:Less than 0.2% of full scale output/10F change Ambient Temp. Operating Range:-17.8 to 48.9C (0 to 120F) Storage Temperature:-40 to 65C (-40 to 149F) Mounting:Direct connection Housing Material:316 Stainless

Our "T" Series pressure transmitter is a microprocessor-based sensor specifically designed for sanitary fluid process applications in the food and beverage industry.

The Anderson "T" series pressure transmitter is a microprocessor-based sensor specifically designed for sanitary fluid process applications in the pharmaceutical and biotechnology industries. Ranges: Rangeability (Turn-down): Over Pressure Limit: Accuracy* Over Pressure Output:  Sensor Style 1 & 2: Above 110% of     calibrated range - 3.8 mA   pressure output Mechanical Trim Adjustments: Repeatability: Hysteresis: Output: Linearity (BFSL): Stability: Power Supply: Indication:     Optional, cap-mounted, LCD Indication   max  = 8    Wetted Material Surface Finish:      Electropolished to R a Temperature Limits (Process): Wetted Material: Housing Material:   Actuating Fill: Hazardous Locations Compliance: Housing Ratings:   UL Compliance with Class 1,  Div. 1, Groups A thru D   Electrical Connections:   for intrinsically safe apparatus, when connected with approved  For sensor type     1 & 2 ONLY Standards: Process Temperature Effect: