Fuji pressure transmitter Level

High performance level measurement using a differential pressure transmitter. High reliability micro-capacitance silicon cell All welded construction with no flange 'O' rings Exceptional resistance to harsh environments Electronic linearisation to correct tank shape Hart® 5.2 multi-drop communication Versatile indicator with 5-digit display Field repair possible with common spare parts Built-in loop calibration facility Wide range of flange types Large installed base Most DP type level transmitters use an 'O' ring seal which will perish within 6 to 12 months usage in a hostile process environment.  The FCX series transmitter uses an all-welded construction with fill fluid that has been subjected to high vacuum for an extended period to remove entrained air.  This provides long term reliability not found in any level transmitter of  it's type.

Guided Wave Radar Level Transmitter The MRG-10 measures liquid level by transmitting low energy radar pulses toward a liquid surface and receiving the radar echoes. The travel time for the radar pulse is proportional to the distance between the gauge and the surface. The radar pulse is virtually unaffected by the contents and atmosphere of the tank, temperature or pressure. Thus radar measurement is proven to be the most reliable gauging method in most applications. Furthermore, maintenance requirements are practically zero because no part of the gauge is in physical contact with the liquid. These features make the MRG-10 guided wave radar very well suited for storage and buffer tanks in the chemical and water industry. The MRG-10 is most appropriate for calm liquid surfaces. If you intend to use the MRG-10 to measure turbulent surface liquids, it may be recommended to employ a still pipe used in order to achieve a calm surface The MRG-10 is appropriate for storage tanks or buffer tanks that have relatively calm surfaces. Chemical and petroleum Pharmaceuticals Food and beverage Other applicatio

Non Contact 2 Part Ultrasonic Level Transmitter SmartLite is a non contact, ultrasonic, continuous level measurement instrument that is able to provide accurate measurements for liquids while automatically compensating for changes in temperature and other environmental conditions. Smartlite Level Transmitter SmartLite is designed for applications such as process tanks, storage vessels, open air piles, and more. SmartLite is a four wire, low voltage device, and is available with a customized graphic LCD display. SmartLite  has two major components, the main control unit and the sensor. Features:   Installation in process tanks,  storage vessels, open air piles and more. Self-adjustment to virtually all types of conditions Full compensation in virtually all environments: vapors, gases, temperature variations, wind, etc. providing highest accuracy even under extremely harsh conditions 0.25% accuracy of measuring range For ranges of up to 10 meters (32 ft) Resolution: 1 mm (0.04 inch) No calibration or maintenance required  

SmartScan® 25 and SmartScan® 50 arenon-contact, continuous ultrasonic level measuring devicesfor installation in various types of tanks and vessels. Drawing on patented technology. The SmartScan products deliverautomatic temperature compensationfor vapors, gases and wind to provide the highest accuracy. Self-calibratingand virtuallyimmune to changing conditions, SmartScan products provide a unique combination of strength, performance, and value.  Smartscan Ultrasonic Level Transmitter Features and benefits: Supplied with 4-20mA, 5 SPDT relays, (up to 10 trigger points) Embedded software configuration foradvanced calculations(Volume, Kg and Totalization) Accurate average calculationsof uneven surfaces (For solids and aggregates) Fast set-uptime saves insta

Ultrasonic Level Transmitter - Gauger GSM Level sensor with integrated GSM modem Gauger GSM Level Transmitter is targeted towards specific niche markets: Remote fuel tank management including fuel theft detection long life in-ditch waste-water monitoring and early warning flood alert systems. The GaugerGSM is certified to Ex II 1G, Ex ia IIB T4 Ga with Ta = -30°C to +70°C and defined as intrinsically safe. The system is allowed for use in all zones: 0, 1 and 2. The system has been certified to both ATEX and IECEx by SIRA ­ a leading UK Ex certification body. Solid AT Gauger GSM Level Transmitter Benefits: Complete data ownership ‐ no on‐going fees for control software Rapid return on investment - measured in months Fit for any site where SMS or GPRS is available Flexibility for customized alerts and reports 24/7 monitoring certified to Ex II 1G, Ex ia IIB T4 Ga with Ta = -30°C to +70°C and defined as intrinsically safe Complete set of parts available Typical Applications: Fuel tank monitoring Detecting fuel theft and leakage Continuous inventory tracking Wastewater monitoring Detecting sewer blockage and overflow Wastewater spill recording Simple instal

Flat Radar Level Sensor An all-in-one radar level transmitter with an integrated converter. The MRF-10 can be used in a wide range of environments thanks to its submersible IP68 durable structure and its compact body (body height: 54mm) Easy to install in the ceiling of a manhole, drain pipe or narrow space without any contact to the liquid. Tokyo Keiki MRF-10 Flat Radar Level Sensor Features: Compact body integrates with the transducer and antenna (height 60mm) stainless steel submergible structure (JIS C 0920 IP68 equivalent) and can be installed in a wide range of environmental conditions. The radar pulse is virtually unaffected by the contents and atmosphere of the tank, temperature or pressure. Thus radar measurement is proven to be the most reliable gauging method in most applications. Furthermore, maintenance requirements are practically zero because no part of the gauge is in physical contact with the liquid. The integrated 2-wire power supply can connect directly to the existing DC line. No need to construct a new supply line. DC 4 ~ 20mA output signal and HART current signal output as standard.

Radar like performance at affordable prices Suitable for liquid, solid and open channel/flow Support of wide range of applications Preprogrammed default settings Simple to operate  Software configurable Ranges of up to 15m (49 ft.) Fits a variety of tanks Simple to install     More flexibility, more compatibility Ultrasonic Level transmitter MonoScan® is an excellent choice for measuring liquid and solid levels at ranges of up to 15 meters, with a 0.25% accuracy of measuring range. The MonoScan® single enclosure and compact sensor, ensures a full match with your installations. Moreover, the MonoScan is the smallest ultrasonic gauging device for measuring open channel flow, incorporating 9 predefined types of weirs and flumes in its memory that assures fast and easy set- up.    Ultrasonic Level Transmitter Advantages Direct installation on tanks, vessels and reactors Self-calibration to virtually all types of conditions Full compensatio