Widest Range of Flow Control and Throttles
Flow control valves limit the amount of flow in a main or branch hydraulic circuit. Bosch Rexroth offers both “flow” controls and “throttles,” to satisfy the widest range of OEM and manufacturing system needs.
Our flow controls offer an integral hydro-stat and incorporate sharp edged orifices to reduce the effect of temperature and consumer load changes on a field set flow values. Available with rotary knobs and key locks, Rexroth hydraulic flow control valves can be field set, locked, and remain tamper resistant. Throttle valves also incorporate sharp- edged orifices; however, lack of a hydro-stat limits stability in ever-changing load conditions.
These products are available in “sandwich” or “module” type in D03 to D08 configurations, offering the flexibility to incorporate speed control functions in addition to direction.
Hydraulics Application: 2-way flow control valves
Key features:
Sizes 6 to 16
For subplate mounting:
Size 6: Porting pattern to DIN 24340 form A and ISO 4401
Sizes 10 and 16: Porting pattern to DIN 24340 form G and ISO 6263
Manual actuation (type 2FRM)
Hydraulic actuation (type 2FRH)
Electrohydraulic actuation (type 2FRW)
Flow control in both directions through rectifier sandwich plate, optional (see below, type Z4S)
Stroke limiter of the rack-and-pinion drive that can be adjusted on both ends (types 2FRH and 2FRW)
With actual value potentiometer for continuous monitoring of the throttle orifice position, optional (types 2FRH and 2FRW)
With external closure of the pressure compensator, optional (size 6)
Check valve, optional (size 6)
Pressure compensator stroke limiter for reducing start-up jumps, optional (sizes 10 and 16)
RE 28 163 (Size 6)
RA 28 389 (Size 10)
2-way flow control valve 2FRM (Size 6)
2-way flow control valve 2FRM, 2FRH, 2FRW (Size 10 and 16)
Hydraulics Application:2-way flow control valves
Key features:
Sizes 6 and 10
As cartridge valve (“K”)
With integrated check valve
Low startup jump
RE 28 155
2FRM.K Flow Control Valves Data Sheet
Hydraulics Application: Pilot operated check valve, leak-free
Key features:
Sizes 12 to 32
Series 2X
Maximum operating pressure: 350 PSI
Maximum flow: 560 L/m
RE 27 551
FD Quick-Q-Meter Flow Control Valves Data Sheets
Hydraulics Application: Throttle valves and throttle check valve use
Key features:
Sizes 6 to 30
For in-line installation
Pressure and viscosity-dependent
Type MG: Throttling in both directions of flow
Type MK: Throttling in only one direction of flow, free flow in the opposite direction (opening pressure 0.5 bar)
With optional surface coating
Special media (e.g. emulsion, water) on inquiry
RA 27 219
MG and MK Flow Control Valves Data Sheet
Hydraulics Application: Double throttle check valves in sandwich plate design
Key features:
Sizes 6 to 22
Porting pattern to DIN 24340 form A and ISO 4401
For limiting the main or pilot flow of one or two actuators
Meter-in or meter-out throttling
4 optional adjustment types:
Rotary knob
Sleeve with hexagon and protective cap
Lockable rotary knob with scale
Rotary knob with scale
Spindle with hexagon socket and scale
RE 27 506 (Size 6)
RE 27 518 (Size 10)
RE 27 526 (Size 16)
RE 27 536 (Size 22)
Twin throttle check valves (Size 6)
Double throttle check valves (Size 10)
Double throttle check valves (Size 16)
Double throttle check valves (Size 22)
Hydraulics Application: Double throttle check valves in sandwich plate design (210 bar frame size)
Key features:
Sizes 6 and 10
Porting pattern to DIN 24340 form A and ISO 4401
For limiting the main or pilot flow of two actuator ports
Meter-in or meter-out throttling
RE 27 510 (Size 6)
RA 27 524 (Size 10)
Double throttle check valves (Size 6)
Double throttle check valves (Size 10)
