Miniature Valve Accessories

ASCO’s Stainless Steel Filter and Regulator, Series 342 features a heavy duty 316L stainless steel construction, while providing better control of pressure regulation at significantly higher flow rates.  The Series 342 is designed for use in harsh environments, including oil and gas exploration, transmission and refining, water and waste water treatment, and chemical to name a few. The 316L Stainless Steel Filter and Regulator is available with ¼” and ½” NPT port connections, 5 or 25 microns filtration elements, and manual drain. Flow capacity ranges from 84 SCFM up to 156 SCFM (@ 90 PSI max inlet pressure and 14 PSI pressure drop). Available options include stainless steel gauge, mounting bracket, NACE compliant versions, and low ambient temperature constructions (- 58°F/- 50°C). High Flow Rate Molded reinforced diaphragm allows for optimized flow paths and increased flow rate ranging from 84 SCFM up to 156 SCFM (@ 90 PSI max inlet pressure and 14 PSI pressure drop). Approvals, Certifications, and Compliance Suitable for use in potentially explosive atmospheres, ATEX II 2G/D c IIC X T100°C (T5), Zone 1 – 21, Explosion Group IIC SIL 2 capable per IEC 61508 NACE MR

Features Compact design In-line mounted Quiet operation Instantaneous shutoff against reverse flow, low forward pressure opening Disc seats before reverse flow to avoid fluid shock on reverse pressure differential Compact, in-line mounted, instantaneous shutoff against reverse flow, low forward pressure opening.

Designed using the DIN 43650 form standards consistent with our solenoid valve coil designs and permitting industry interchangeability. Available for user wiring, or factory pre-wired installations. ASCO!ˉs electrical connection devices are designed usin the DIN 43650/ISO 4400 or DIN 46244 (Pg 9P) form standards consistent with our solenoid valve coil designs and permitting industry interchangeability. Each size is available for user wiring or factory prewired installations. Other options include 1/2" conduits, and LED/VDR models. Features Glass fiber reinforced polyamide housing and lid IP65 protection against moisture entry and washdown when properly installed with gaskets  LED: L ight Emitting Diode. A solid-state diode that emits light to indicate power to the connector VDR: Varistor absorbing the self-inductance of the coil. The VDR is there to protect the coil or controller against supply over-voltage or peak Maximum voltage 240 Volts

Solid state electronic timer used to automatically control ASCO solenoid valves. Features Solid state electronic timer used to automatically control ASCO solenoid valves Typically used with ASCO Solenoid Valves for automatic draining of condensate in compressed air systems Selectable timing ranges (2-40 seconds !°on!± 30 seconds to 45 minutes !°off! Manual override for test/reset LED lights to indicate timing phase

Used in Division I areas for field wiring of explosion proof solenoid valves. Features Junction Box Enclosures for the wiring of ASCO solenoids are Raintight Type 3 and 3S, Watertight Type 4 and 4X, Submersible Type 6 and 6P, Explosion-proof Type 7, Class I, Groups B, C, and D Dust-Ignition proof Type 9, Class II, Div. 1, Groups E, F and G, Nonincendive Class I, Div. 2 (1.4 watts only) Approvals: UL, CSA  Electrostatic powder paint, stainless steel screws, and molded epoxy coils provide excellent protection in corrosion environments Factory pre-wired and assembled to any explosionproof ASCO RedHat II solenoid valve Reduces installation costs by eliminating the need Stainless Steel to use a separate explosionproof splice box to Captive Screws terminate the solenoid valve!ˉs wirin

Spring loaded disc allows free flow in one direction and an adjustable flow in the other. Features Adjustable flow control design provides greater capacity than most constructions Spring-loaded disc allows free flow in one direction and an adjustable flow in the other Tapered brass stem controls flow through the cross-hole in the disc Unique locking device in adjusting knob Scribed graduations provide position indication for the stem Mountable in any position

Filters, Regulators and Lubricators. Totally modular system, precise regulation and control and large bowl capacity. ASCO's dynamic Modulair 100 Series offers all the control, flexibility and performance you need from your air preparation equipment. The components of the Mod 100 Series can be installed separately or can be assembled into a complete unit, as you require. • Totally modular system • Precise regulation and control • Large bowl capacities • Ambient Temperature Range: 32ºF to 120ºF (0ºC to 49ºC).     Filters Filters are used to remove oil, contaminants, and moisture from instrument air lines to extend the life of other pneumatic components. They are available with 5 um to 30 um filter elements and in automatic or semi-automatic drain configurations. Coalescing Filters Coalescing filters are used as oil removal filters and are able to remove oil and other contaminants to the 0.01 um size. They are used in situations where standard air filters would leave too many contaminants in the system. They are also available with 5 um pre-filters assemble to extend the life of

To connect our Micro-Miniature line of General Service and Isolation valves. Adapter Fittings Adapter Fittings for #10-32 UNF ports and Soft Tubing Thread Size Barb Size Fitting Material Seal Material Part Number #10-32 1/16!± I.D. Tubin Polypropylene FKM F714-12 #10-32 1/8!± I.D. Tubin Polypropylene FKM F714-11 #10-32 1/16!± I.D. Tubin Brass FKM F765-02 #10-32 1/8!± I.D. Tubin Brass FKMA F765-01 Adapter Couplings and Tees for Soft Tubing Type Barb Size Fitting Material Part Number Coupling 1/16!± to 1/16 Polypropylene F614-01 Coupling 1/8!± to 1/8 Polypropylene F614-02 Coupling 1/16!± to 1/8 Polypropylene F614-03 Tee 1/16! Polypropylene F612-01 Coupling Tee Tee 1/8! Polypropylene F611-01

Special silicone tubing and hose guides for use with our Pinch valves. Tubing ASCO offers VQM tubing to be used with the Series 284, 384, 373, 388, 390, and 401 pinch valves.  It is available in various sizes as listed below. Specifications Tubing Material Platinum Cured VQM 55+/-5 Shore !°A!± in accordance with AST Durometer D-2240 Meets requirements of U.S. Pharmacopoeia XX, Standards Class VI-Plastic Containers Tubing Catalog Numbers Tubing for Series 284, 384 Tubing for Series 373, 388, 390, and 401 Tubing Size (inches) Tubing Size (inches) Tubing Catalog NumberID OD Wall Tubing Catalog NumberID OD Wall 1/32 3/32 1/32 F739-01 .030 .065 .017 TB030X065SI1P 1/32 5/32 1/16 F739-02 .040 .085 .022 TB040X085SI1P 1/16 1/8 1/32 F739-03 .062 .095 .017 TB062X095SI1P 1/16 3/16 1/16 F739-04 .062 .125 .031 TB062X125SI1P 3/32 5/32 1/32 F739-05 .078 .125 .031 TB078X125SI1P 3/32 7/32 1/16 F739-06 .104 .192 .044 TB104X192SI1P 1/8 3/16 1/32 F739-07 .132 .183 .026 TB132X183SI1P 1/8 1/4 1/16 F739-08 .187 .313 .063 TB187X313SI1P 3/16 1/4 1/32 F739-10 .250A .375A .062A TB250X375SI1P 1/4 5/16 1/32 F739-11 1/4 3/8 1/16 F739-12 3/8h 1/2h 1/16A F739-13

Compact 3-ported valves have oversized orifice for quick exhaust of cylinders, brakes, actuators, clutches, etc. Features Compact, 3-ported valves have oversized orifice for quick exhaust of cylinders, brakes, actuators, clutches, etc. Allow use of smaller pipe lines and control components When used as a shuttle valve, high pressure from the two inlets exits through the common outlet Mountable in any position

For attaching conduit and instruments. Features  Patented two piece design for easy installation of     equipment in hazardous locations  Allows for optimal positioning of components, and locks them into position Reduces time required for connecting and disconnecting conduit from instruments Male NPT threaded connections - No special adapters needed All 303 stainless steel construction to resist corrosion Construction Part Material Body 303 Stainless Steel O-Ring Buna "N"

ASCO offers a wide range of electrical and mechanical options which can customize valves to your precise application. Optional Electrical Features Most optional electrical features shown here can be included on ASCO valves approved by UL, FM, and CSA. Identify the options you want by adding the appropriate prefix to the catalog number of the valve you are specifying. To determine the proper prefix, use the Valve Series Specification Table for the valve you are ordering to determine its watt rating/class of coil insulation. RedHat II Solenoid Options Using Table 3, find the desired solenoid option in the left column and the watt rating/class of coil insulation in the next column. The choice of prefixes is shown in the next two columns on that line. The first column indicates the prefix if Class F temperature protection  is sufficient for your requirements. The second column provides the desired solenoid option, plus the higher temperature protection of a Class H coil. For example, to select an 8262H002 valve with a Class H Open Frame Spade Terminal Solenoid, assuming the voltage to be 120 volts AC, 60 Hz: In the Specification Table for Series 8262, the W

Should be used whenever is essential that fluid be free of foreign solid matter. Assures proper flow and prevents damage to valves, controls and other equipment. Features Should be used whenever it is essential that fluid be free of foreign solid matter Assure proper flow and prevent damage to valves, controls, and other equipment Construction Forged Brass and Stainless Steel Bodies Rugged, self-cleaning !°Y body!± strainers have easily removed strainer perforated stainless steel or wire mesh. Free hole area shown in table is total of all openings. Suitable for air, water, oil, and steam. Plastic Body (Acetal) Straight-through flow with large area orifice. Strainers can be easily removed and back flushed. Suitable for air and water. Installation May be mounted in any position, but should be located on the inlet side of the valve, as close to it as possible.