ASCO RedHat Solenoid Valves 3-Way Solenoid Valves F316/ P316 Series
Air/Inert Gas, Water – 3/8″–1″
Air operated valves available in normally closed constructions with brass bodies and NBR seats.
Features
Unique sealing member isolates pilot air pressure
from mainline fluid
Variations in pilot air pressure do not affect
valve operation
Design provides long life handling of lubricated air
Handle fluids up to 200F (92C)
Some constructions handle steam up to 353F (177C)
Mountable in any position
Construction
Valve Parts in Contact with Fluids
Body Brass
Seat NBR or PTFE (for steam service)
Air Operators
Connection Size: 1/8" NPT.
Actuated Displacement Volume: 0.60 cu. in. for 3-30 psi operators;
0.25 cu. in. for 30-125 psi operator
.
Media: Air
(For vacuum or other media, consult your local ASCO sales office for details.
Refer to Optional Features Section for other available manual operators.)
Important
On 3-way and 4-way valves, except for those with zero minimum operating
pressure, a Minimum Operating Pressure Differential must be maintained
SPECIAL
between the pressure and exhaust ports. Supply and exhaust piping must be
SERVICE VALVES
full area, unrestricted. ASCO flow controls and similar components must be
installed in the cylinder lines only.
Options
Nominal Ambient Temp. Ranges
Elastomers:For F262, P262, P210, P320
32F to 125F (0C to 52C)
FKM (suffix V), Oxygen Service (suffix N)
Refer to Engineering Section for details.
Refer to Engineering Section for fluid and temperature compatibility.
Ordering Information
We must have catalog number, operating pressure,
and fluid to be handled. Use strainers with air
operated valves.
Refer to Engineering Section for details.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
