The ADM-PRO™ range of compact distribution manifolds come in our standard configuration (as shown on the data sheet section of this webpage)or to client specifications. Materials of construction include 316 S11 stainless steel to N.A.C.E., Ali-Bronze, and certain extoic alloys.
ADM-PRO™ can be supplied with up to 40 take-off valves. Inlet and drain connections are threaded as standard however, can be made to your specification, this includes flanges i.e. 150 lbs. RF. or even socket / butt weld.
Mounting legs are supplied as standard to make installation easier. Take off sizes can vary from 1/4” to 1” in size.
Working pressures ranges are upto 6,000psi (414bar) and 10,000 psi (670bar). Other options such as hand wheels and locking devices can be supplied
The Alco ADM-PRO TM range of compact, economical air distribution manifolds come in our standard configuration at 180 degrees apart or to client specifications including single sided.
ADM-PRO TM can be supplied with up to 40 take-off valves, ball or needle valves. Inlet and drain connections can be made to specification, this includes flanges i.e. 150 lbs. Rf. or even socket / butt weld.
Threads include NPT, BSPP or BSPT. Also twin ferrule compression / Tube end conections are available.
Mounting legs are supplied as standard to make installation easier. Take off sizes can vary from 1/4” to 1” in size. Working pressures range from 2,000 psi up to 6,000 psi, also see needle valve version in section 9 page 5 & 6.
The Alco ADM-S range of compact, High Integrity distribution manifolds come in our standard configurations or to client specifications. Being a bolted construction drop-centre facility is easily achieved for inspection, maintenance or repair.
Typical example: ADM6-S4NS (6 way ADM with 1/2" NPT female inlet / drain at both ends and 6 x 1/2" NPT female valved outlets / take-offs.
ADM-S range can be supplied with up to 40 take-off ball valves, or mixed ball and screw-in needle valves.Inlet and drain connections can be made to specification, this includes threaded NPT, BSPP or BSPT as standard or flanges i.e. 150 lbs. Rf. or even socket / butt weld.
Mounting legs or holes can be supplied to make installation easier. Take off sizes can vary from 1/4” to 1” in size. Working pressures range from 2,000 psi up to 6,000 psi.
The Alco NVDM compact, integral needle valve type, high integrity distribution manifolds come in our standard configuration - Valve orientations come in 3 formats type A, B or C for ease of use and maximise space envelope utilisation and operator access.
They are Double sided, Angled and single (as shown on the data sheet section below) or to client specifications.
NVDM can be supplied with up to 20 take-off valves. Inlet and drain connections can be made to specification, this includes flanges i.e. 150 lbs. RF socket / butt weld, threaded or even compression type tube connectors.
M10 base mounting holes are supplied as standard to make installation easier. Take off connections are 1/4” or 1/2” in size. Working pressures range from vacuum up to 6,000 psi & 10,000 psi.
