Buerkert valve Steam up to 180 °C

3/2-way Solenoid Valve for high temperatures, G 1/4  Seat valve direct acting  Media temperature up to +180 !  Push-over solenoid system  For gases and fluids Technical data DN 2.0 - 4.0 Ori ce Brass with stainless steel seat 1.4305, Body materials Stainless steel 1.4581 Epoxy Coil material H Coil insulation class Stainless steel Inner part of valve NBR, FKM, PTFE, EPDM Seal material Media Neutral  uids, hydraulic oil, oil without additives   NBR Oil and fat-free  uids   EPDM Per-solutions, hot oils with additives   FKM Steam, organic solvents   PTFE Media temperature -10 to +  90 !   NBR -40 to +130 !   EPDM    0 to +130 !   FKM -40 to +180 !   PTFE Max. +55 ! Ambient temperature !10 Voltage tolerance 100% continuous rating Duty cycle Tag connector acc. to DIN EN 175301-803 Form A Electrical connection (previously DIN 43650) for cable plug Type 2508 (supplied as standard) IP 65 with cable plug Protection class As required, preferably with actuator upright Installation Ordering chart for valves (other versions on request) Brass or stainless s

2/2-way-Solenoid Valve for neutral media up to +180°C, G 1/2 - G 1 Type 0406 is a pilot controlled solenoid valve with servo-piston and is suitable for media up to +180 °C. A minimum differential pressure of 1 bar is required to fully open the valve. The valve is closed by its own media pressure and spring force without power supply. Type 2508 Cable plug Type 1078 Timer unit Type 2511 ASI cable plug Type 0406 can be combined with... • Solenoid valve with servo-piston • Temperatures up to + 180 °C • For neutral media, incl. steam • Push-over coil system • Threaded and flange valve bodies Technical data Orifice DN 13 - 25 Body material Brass, grey cast iron Coil material Epoxy Coil insulation class H Seal material PTFE/graphite Media Neutral media such as hot water and steam Media temperature -10 to +180 °C Ambient temperature max. +55 °C Viscosity max. 21 mm 2 /s Voltage tolerance ±10% Duty cycle 100% continuous rating Electrical connection Cable plug for Ø 7 mm cable, acc. to DIN EN 175301-803 Form A (supplied as standard) Protection

2/2-way Solenoid Valve for high pressures and temperatures  Seat valve, direct-acting  Pressure range up to 100 bar  Media temperature up to 250 !  Push-over solenoid system  For gases and fluids Technical data DN 1.0 - 6.0 mm Ori ce Brass with stainless steel seat 1.4305 Body material or stainless steel body 1.4581 Epoxy Coil material H Coil insulation class FKM, PTFE Seal material (others on request) Media Hot air, hot oils, oils with additives,  FKM per-solutions Water, steam, fuels, hydraulic materials, alcohol,  PTFE organic solvents, waste gas Media temperature -10 to +130 !  FKM -40 to +180 !  PTFE Up to + 250 !C (on request  Steel 2 Max. 21 mm /s Viscosity Max. + 55!C (250 !C on request) Ambient temperature please see ordering chart ! 10 Voltage tolerance 100% continuous rating Duty cycle Cable plug for  7 mm cable, acc. to DIN EN Electrical connection 175301-803 Form A (supplied as standard) IP 65 with cable plug Protection class 0.6 (brass version) Weight [kg] As required, preferably with actuator upright Installation Power consumption Response times 1) Inrush

2/2-way Solenoid Valve for neutral media up to +180!C G 1/2 - G 2,  ange  Servo-piston with forced lifting  Switches without differential pressure  Temperatures up to + 180!  For neutral media, incl. steam  Push-over coil system Technical data DN 13 - 50 mm Ori ce Brass (grey cast iron on request) Body material Epoxy Coil material H Coil insulation class PTFE/graphite Seal material Neutral media such as hot water and steam Media -20 to +180 ! Media temperature Max. +55 ! Ambient temperature 2 Max. 21 mm /s Viscosity !10 Voltage tolerance 100% continuous rating Duty cycle Cable plug for  7 mm cable, acc. to Electrical connection DIN EN 175301-803 Form A (supplied as standard) IP 65 with cable plug Protection class As required, preferably with actuator upright Installation Ordering chart for valves (other versions on request) Brass body, with cable plug Item no. per voltage/frequency [V/Hz] 3) 1) 2)  ce /h] 3 Circuitfunction  Port  connection Ori [mm] Kv value water [m Pressure range [bar]  024/50 230/50 230/UC A  2/2-way valve NC Brass body, seal material PTFE/graphite

2/2-way direct acting solenoid valve  High quality seal material  Special versions up to +180oC  Impulse version optional  Threaded port and sub-base connections  Explosion proofed version optional Technical data Body material Brass, stainless steel 1.4305  Type 6013 Brass, stainless steel 1.4305  Type 6013 A FKM, PTFE/Graphite (EPDM on request) Seal material Silicon, oil and fat free version Analysis version -4 Tightness <10  mbar l/s Type 6013 A Limit value for risidual carbon <0.2 mg/dm2 Type 6013 A   Technical vacuum Medium   Neutral gases and liquids  Type 6013     (e.g. compressed air, water, hydraulic oil)   Neutral medium, which does not attack the body    Type 6013 A  and seal materials (see chemical resistance chart) Media temperature -10 to +100 !C(PA coil) till 120oC (Epoxy coil)  FKM Up to +180 oC (see chemical resistance chart)  PTFE/Graphite -10 to 100!C (AC) -10 to 120!C (D  FKM, Circuit function B Max. +55 ! Ambient temperature Max. 21 mm2/s Viscosity Port connection G1/8, G1/4, G3/8, sub-base  Type 6013 G1/8

2/2-way Compact Solenoid Valve, G 1/4 - G 1/2  Direct-acting, normally closed  Brass and stainless steel body  Electrical connection cable plug Form A  High pressure version up to 100 bar  High temperature version up to +180 ! Technical data G 1/4, G 3/8, G 1/2 (NPT and RC on request) Port connection DN 2.0 - 12.0 Ori ce Brass or stainless steel 1.4404 (316L) Body material Epoxy Coil material Coil insulation class Epoxy class H FKM, PTFE/FKM and PTFE/PEEK for high temperature Seal material versions (EPDM on request) Vacuum, neutral gases and liquids (e.g. compressed air, Medium town gas, natural gas, water, hydraulic oil, petrol) and slightly aggressive medium (stainless steel version) Hot  uids and steam (only with stainless steel body)  High temperature version Medium temperature -10 to +140!  Seal material FKM, PTFE/FKM -40 to +180 !  Seal material PTFE/PEEK -10 to +55! Ambient temperature 2 max. 21 mm /s Viscosity 24 V DC, 24 V/50 Hz, 230 V/50 Hz Voltages !10 Voltage tolerance 100 % continuous operation Duty cycle / single valve According to DIN EN 175301-803 Form A for cable Electrical

2/2-way Solenoid Valve for neutral media and steam  Piston-operated valve with pressure relief  Switches without differential pressure  For neutral media and steam  Temperatures up to +160 !C  Fast switching Technical data DN 12 Ori ce Gunmetal Body material Stainless steel and brass Valve internals PTFE Seal material Neutral media, preferably steam Media 0 to +160 ! Media temperature Max. +55 ! Ambient temperature Operating voltage 24/110/230 V / 50-60 Hz  DN 12 on request  other voltages !10 Voltage tolerance 100% continuous rating Duty cycle Tag connector sidewards acc. DIN EN 175301-803 Electrical connection Form A (for cable plugs Type 2508, see Accessories) IP 65 with cable plug Protection class Ordering chart for valves (other versions on request) All valves with gunmetal body, supplied without cable plug (see Accessories)  ce [mm] Circuit function Ori Kv valuewater[m3/h] Pressure range [bar]  Port connection Seal material Voltage/ frequency [V/Hz]  Item no. A 2/2-way valve  122.20-10G 3/8PTFE024/50-60140 427 NC 110/50-60140 428 230/50-60140 429 G 1/2PTFE024/50-60140 430 1

2/2-way solenoid valve, pilot- controlled, for neutral liquids and gases, steam, G 1/4, G 3/8, G 1/2  High performance C small siz  High pressure version up to 40 bar  High temperature version up to 180 !  Fast-acting  ATEX version optional Technical data G 1/4, G 3/8, G 1/2 Port connections DN 6.0, DN 12.0 Ori ce Brass, Stainless steel Body material Epoxy Coil material Class H Coil insulation class Brass/Stainless steel, PEEK, PTFE carbon  lled, FKM Internal parts of valve (EPDM on request) 1.4113, 1.4303 FKM, PTFE/FKM and PTFE/PEEK for high temperature Seal material and high pressure versions (EPDM on request) Neutral gases and liquids, such as e.g. compressed air, Medium water, hydraulic oil   Steam and hot medium High temperature version 2 /sec max. 21 mm Viscosity   Medium temperature -10!C to +140 ! FKM -40!C to +180 ! PTFE/PEEK -30!C to +120 !C (on reques EPDM max. 55 ! Ambient temperature 24V DC, 24V/50Hz, 230/50Hz (others on request) Operating voltage !10 Voltage tolerance 100% continuous rating Duty cycle Tag connector acc. DIN EN 175 301-803 Form A Electrical connection for cab