Burkert valve Steam up to 180 °C Type 6013 - Direct acting solenoid valve

2/2-way direct acting solenoid valve
 High quality seal material
 Special versions up to +180oC
 Impulse version optional
 Threaded port and sub-base connections
 Explosion proofed version optional

Technical data
Body material
Brass, stainless steel 1.4305
 Type 6013
Brass, stainless steel 1.4305
 Type 6013 A
FKM, PTFE/Graphite (EPDM on request)
Seal material
Silicon, oil and fat free version
Analysis version
-4
Tightness <10
 mbar l/s
Type 6013 A
Limit value for risidual carbon
<0.2 mg/dm2
Type 6013 A
  Technical vacuum
Medium
  Neutral gases and liquids
 Type 6013
   
(e.g. compressed air, water, hydraulic oil)
  Neutral medium, which does not attack the body  
 Type 6013 A
 and seal materials (see chemical resistance chart)
Media temperature
-10 to +100 !C(PA coil) till 120oC (Epoxy coil)
 FKM
Up to +180 oC (see chemical resistance chart)
 PTFE/Graphite
-10 to 100!C (AC) -10 to 120!C (D
 FKM, Circuit function B
Max. +55 !
Ambient temperature
Max. 21 mm2/s
Viscosity
Port connection
G1/8, G1/4, G3/8, sub-base
 Type 6013
G1/8, G1/4
 Type 6013 A
Operating voltage
24 V DC, 24 V/50 Hz, 230 V / 50 Hz
 Type 6013
24 V DC, 230 V / 50 Hz (other voltages on request)
 Type 6013 A
! 10
Voltage tolerance
100% continuous rating
Duty cycle/single valve
Intermittent operation 60% (30 min) or with 5 W coil
 With block assembly on manifold
on request
Tag connector acc. to DIN EN 175301-803 Form A  
Electrical connection
(previously DIN 43650) for cable plug Type 2508
 
(see accessories)
 
As required, preferably with actuator upright
Installation
No oils, fats or silicone to be used during installation
Assembly
IP65 with Cable Plug
Protection class
Polyamide class B
Coil insulation class
Epoxy class H

Technical data, continued
Circuit function A
1)
Ori ce Port  Kv-value
Electr. powerCoil sizeResponse times
Weight  Power consumption
connection water
Inrush  Hold  opening closed
[mm]
[W]
[m3/h] [g]
(AC) (AC) [ms] [ms]
2.0G1/80.12325 8W AC or 8W DC (9)24 VA17 VA5 (32mm)2030
2.0G1/40.12465 8W AC or 8W DC (9)24 VA17 VA5 (32mm)2030
2.0sub-base0.12290 8W AC or 8W DC (9)24 VA17 VA5 (32mm)2030
2.5G1/80.16325 8W AC or 8W DC (9)24 VA17 VA5 (32mm)2030
2.5G1/40.16465 8W AC or 8W DC (9)24 VA17 VA5 (32mm)2030
3.0G1/80.23325 8W AC or 8W DC (9)24 VA17 VA5 (32mm)2030
3.0G1/40.23465 8W AC or 8W DC (9)24 VA17 VA5 (32mm)2030
3.0G3/80.23550 10W AC or 10WDC (11) 30 VA22 VA6 (40mm)2030
4.0G1/40.30465 8W AC or 8W DC (9)24 VA17 VA5 (32mm)2030
4.0G3/80.30550 10W AC or 10WDC (11)30 VA22 VA6 (40mm)2030
6.0G1/40.55465 8W AC or 8W DC (9)24 VA17 VA5 (32mm)2030
6.0G3/80.55550 10W AC or 10WDC (11)30 VA22 VA6 (40mm)2030
Circuit function B
1)
Ori ce Port  Kv-value
Electr. powerCoil sizeResponse times
Weight  Power consumption
connection water
Inrush  Hold  opening closed
[mm]
[W]
[m3/h] [g]
(AC) (AC) [ms] [ms]
2.00G 1/80.123257 W(AC) or 8 W DC (9)24VA17VA5 (32mm)2030
2.00G 1/40.124657 W(AC) or 8 W DC (9)24VA17VA5 (32mm)2030
2.00sub-base 0.122907 W(AC) or 8 W DC (9)24VA17VA5 (32mm)2030
3.00G 1/80.233257 W(AC) or 8 W DC (9)24VA17VA5 (32mm)2030
3.00G 1/40.234657 W(AC) or 8 W DC (9)24VA17VA5 (32mm)2030
3.00sub-base0.232907 W(AC) or 8 W DC (9)24VA17VA5 (32mm)2030
4.00G 1/40.34657 W(AC) or 8 W DC (9)24VA17VA5 (32mm)2030
6.00G 1/40.554657 W(AC) or 8 W DC (9)24VA17VA5 (32mm)2030

Ordering chart for valves (other versions on request)
6013  Universal valve with FKM seal, brass and stainless steel body (Polyamide coil)
   Delivered without cable plug (see accessories)
2)
1)
 ce [mm]
Circuit function Ori Portconnection Kv value water[m3/h]  Coil power [W] Pressure range [bar]  Voltage/Frequency[V/Hz] Item no.brass bodyFKM Seal Item no.Stainless steel body, FKM seal
2.0G 1/80.1280 - 12024/DC134 237134 233
A 2/2-way valve NC
0 - 25024/50132 865134 234
0 - 25230/50134 239134 236
G 1/40.1280 - 12024/DC137 537137 533
0 - 25024/50137 538137 534
0 - 25230/50137 540137 536
sub-base0.1280 - 12024/DC134 244
0 - 25024/50134 245
0 - 25230/50134 247
2.5G 1/80.1680 - 10024/DC134 240
0 - 16024/50134 241
0 - 16230/50134 243
3.0G 1/80.2380 - 6024/DC126 091126 078
0 - 10024/50126 092126 079
0 - 10230/50126 094126 081
G 1/40.2380 - 6024/DC125 301125 317
0 - 10024/50125 302126 082
0 - 10230/50125 304126 084
4.0G 1/40.3080 - 1.5024/DC125 306125 318
0 - 4024/50125 307125 319
0 - 4230/50125 309125 320
6.0G 1/40.5580 - 0.5024/DC125 311126 086
0 - 1.5024/50125 312126 087
0 - 1.5230/50125 314126 089
1) 2)
 Measured at +20 !C, 1 ba  pressure at valve inlet and free outlet..
2)
 Measured as overpressure to the atmospheric pressure
Ordering chart for valves
6013  Universal valve with FKM seal, brass body (Epoxy coil)   
   Delivered without cable plug (see accessories)
1)
2)
 ce [mm]
Item no..
Circuit function Ori Portconnection Kv value water[m3/h]  Pressure range [bar]  Coil power[W] Voltage/Frequency[V/Hz]
824/DC213 543
B 2/2-way valve  NO
2.0G1/80.120 - 16
7230/50213 550
824/DC213 545
G1/80.230 - 8
7230/50213 551
3.0
824/DC213 546
G1/40.230 - 8
7230/50213 552
8 024/DC213 548
4.0 G1/4 0.3 0 - 4
7 230/50213 553
8 024/DC213 549
6.0 G1/4 0.55 0 - 2
7 230/50213 554

Ordering chart for valves
6013  Universal valve with FKM seal, G 3/8, brass body (polyamide coil)   
   Delivered without cable plug (see accessories)
1)
2)
 ce [mm]
Circuit function Ori Portconnection Kv value water[m3/h]  Coil power[W] Pressure range [bar]  Voltage/Frequency[V/Hz] Item no.brass seat,FKM Seal Item no.Stainless steel seat,FKM Seal
3.0 G 3/80.23100 C 8024/DC134 248135 43
A 2/2-way valve NC
   
0 C 14024/50134 249135 43
0 C 14230/50134 251135 43
4.0G 3/80.30100 C 2.5024/DC134 252135 43
0 C 6024/50134 253135 43
0 C 6230/50134 255135 43
6.0G 3/80.55100 C 0.75024/DC134 256135 43
0 C 2.5024/50134 257135 43
0 C 2.5230/50134 259135 44
1) 2)
 Measured at +20 !C, 1 ba  pressure at valve inlet and free outlet..
2)
 Measured as overpressure to the atmospheric pressure
Ordering chart for valves
6013 Valves for high temperature applications (to !180oC), PTFE seat seal, brass body
   Delivered without cable plug (see accessories)
   Brass body with Stainless steel seat
   (Epoxy coil)
1)
2)
Circuit function Orifice [mm] Port connection Kv value water [m3/h]  Coil power  [W] Pressure range [bar]  Voltage/ Frequency[V/Hz] Item no.
2.0 G 1/4 0.12 8 0 C 12024/DC136 01
A 2/2-way valve NC
A
0 C 25024/50136 01
0 C 25230/50136 01
3.0 G 1/40.23 10 0 C 6024/DC136 01
P
0 C 10024/50136 02
0 C 10230/50136 02
G 3/80.23 10 0 C 8024/DC136 02
0 C 14024/50136 02
0 C 14230/50136 02

Ordering chart for valves, Standard temperature version for DC power supply, impulse version
All valves with 32mm coil(AC10), Impulse version, seal material FKM,thermal Insulation class H (epoxy coil),
medium temperature -10!C to 120!C, without manual override and cable pl
Item no. per voltage/
frequency [V/Hz]
2)
1)
 ce [mm]
Circuit function Port connection Ori Kv-value water [m3/h]  Power consumption DC (hot/cold coil) [W]Pressure range [bar]  012/DC 024/DC
Brass body
A 2/2-way valve
2.00.120-167209 266209 272
Sub-base 2.50.160-107209 267209 273
3.00.230-67209 268209 274
2.00.120-167209 269209 275
G 1/8  2.50.160-107209 270209 276
3.00.230-67209 271209 277

Ordering chart for valves (other versions on request)
6013A Analytical valve with brass body and FKM seal, (Polyamide coil)
    Delivered without cable plug (see accessories)
2)
 ce [mm]
Circuit function Ori Portconnection Kv value water[m3/h] 1) Pressure range[bar]  Coil power [W] Voltage/Frequency[V/Hz] Item no.
2.0 G 1/8 0.12 0-12 8 24/DC137 826
A 2/2-way valve NC
0-25 230/50137 827
A
2.5 G1/8 0.16 0-10 8 24/DC137 828
0-16 230/50137 829
3.0 G 1/4 0.23 0-6 8 24/DC137 830
P
0-10 230/50137 831
4.0 G 1/4 0.30 0-1.5 8 24/DC137 832
0-4 230/50137 833
1) 2)
 Measured at +20 !C, 1 ba  pressure at valve inlet and free outlet..
2)
 Measured as overpressure to the atmospheric pressure
6013A Analytical valve with stainless steel body and FKM seal, (Polyamide coil)
    Delivered without cable plug (see accessories)
2)
 ce [mm]
Circuit function Ori Portconnection Kv value water[m3/h] 1) Pressure range[bar]  Coil power [W] Voltage/Frequency[V/Hz] Item no.
A 2/2-way valve NC
2.0 G 1/8 0.12 0-12 8 24/DC137 818
A
0-25 230/50137 819
2.0 G1/4 0.12 0-12 8 24/DC137 820
0-25 230/50137 821
P
3.0 G 1/4 0.23 0-6 8 24/DC137 822
0-10 230/50137 823
4.0 G 1/4 0.30 0-1.5 8 24/DC137 824
0-4 230/50137 825

Ordering chart for Manifolds
Accessory part Quantityof valve places Item no.
Single manifold in aluminium 005 020
Multiple manifold in aluminiumHole spacing A [mm]Total length B [mm]Hole spacing C [mm]
2   57  65 005 023
3   90  98 005 286
4 123 131 005 287
5 156 164 57 005 035
6 189 197 57 005 038
8 255 263 90 005 386
10 321 329 90 005 764
Connector nipplewith O-Ring, to connect from manifold 005 040
Covering plate with screws and O-ring for locking unoccupied valve positions 005 630

Ordering chart for accessories
Included in delivery is a cable plug with  at seal and  xing screw.  
Other versions with cable plug acc. to DIN EN 175301-803
(previously DIN43650), see Datasheet: Type 2508.
Circuit Voltage Item no.
without circuitry 0 -250 V 008 376
with LED 12 -24 V 008 360
with LED and varistor 12 -24 V 008 367
with LED and varistor 200 -240 V 008 369
1)
with inverter
        24V DC on request
further versions see datasheet Type 2508
1)
 The inverter plug contains an electronic, which especially enables the electric 3 wire control
 Input for 3 wire technology, common !°-!± polarity, two split !°+!± polarit
 Output suitable for implulse version for Type 6013/6014   

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: