Buerkert valve High pressure up to 250 bar

2/2-way Solenoid Valve for high pressures and temperatures  Seat valve, direct-acting  Pressure range up to 100 bar  Media temperature up to 250 !  Push-over solenoid system  For gases and fluids Technical data DN 1.0 - 6.0 mm Ori ce Brass with stainless steel seat 1.4305 Body material or stainless steel body 1.4581 Epoxy Coil material H Coil insulation class FKM, PTFE Seal material (others on request) Media Hot air, hot oils, oils with additives,  FKM per-solutions Water, steam, fuels, hydraulic materials, alcohol,  PTFE organic solvents, waste gas Media temperature -10 to +130 !  FKM -40 to +180 !  PTFE Up to + 250 !C (on request  Steel 2 Max. 21 mm /s Viscosity Max. + 55!C (250 !C on request) Ambient temperature please see ordering chart ! 10 Voltage tolerance 100% continuous rating Duty cycle Cable plug for  7 mm cable, acc. to DIN EN Electrical connection 175301-803 Form A (supplied as standard) IP 65 with cable plug Protection class 0.6 (brass version) Weight [kg] As required, preferably with actuator upright Installation Power consumption Response times 1) Inrush

2/2-way Solenoid Valve for higher pressures, G 1/4  Pressure range up to 250 bar  Direct-acting, normally closed and normally open  Electrical connection cable plug Form A  Also available with ATEX approval Technical data G 1/4 Port connection DN 1.2 - 2.0 Ori ce Stainless steel 1.4401 Body material Epoxy Coil material H Coil insulation class Stainless steel/PCTFE Seal material Neutral gases and liquids Media -10! to +130! Media temperature max. +55! Ambient temperature 2 max. 21 mm /s Viscosity 24 V DC, 24 / 230 V / 50 Hz Operating voltage other voltages on request !10 Voltage tolerance max. 100/min. Cycling rate 100% continuous rating Duty cycle DIN EN 175301-803 Form A for cable plug Type 2508 Electrical connection IP65 with cable plug Protection class As required, preferably with actuator in upright position Installation Technical data, continued Power consumption  Response times Response times Voltage AC  Voltage DC Power consumption Power AC and DC consumption InrushHold (hot coil) Opening [ms]Closing [ms] [VA][VA][W](hot /cold coil) [W] 20-3020-30 854814 14 / 18 Response times [ms]: Me

2/2-way Solenoid valve  for high pressures  servo-assisted Technical data stainless steel, brass and stainless steel, nickel-plated Body material stainless steel Valve internals PEEK/FKM; PCTFE/FKM; PTFE/FKM Sealing material neutral gases and  uids Media Medium temperature C10 to +80 !  PEEK/FKM C10 to +80 !  PCTFE/FKM C10 to +80 !  PTFE/FKM max. +55 ! Ambient temperature ca. 21 mm/s Viscosity 24/DC Operating voltage 24/220-230 V / 50 Hz other voltages on request !10 Voltage tolerance ca. 80/min Cycling rate 100 % continuous rating Duty cycle Cable plug (part of the delivery) Electrical connection IP65 with cable plug Protection class as required, preferably with actuator upright Installation Ordering chart for valves (other versions on request)  ce Circuit function Ori[mm] Port connection Kv-valuewater[m/h] Pressure range[bar] Body material Seal material Voltage/frequency[V/Hz] Item no. A5.0G 1/40.61C200BrassPEEK/FKM24/DC002 36 1C250BrassPEEK/FKM220-230/50002 36 8.0G 3/81.01C210BrassPEEK/FKM24/DC002 36 1C250BrassPEEK/FKM24/50132 43 230/50002 370 12.0G 1/22.61C250Stainless PCTFE/FKM24/DC000 520 s

2/2-way Solenoid Valve with servo- piston for higher pressures G 1/2 - G 1  Solenoid valve with servo-piston  Pressure range up to 50 bar  Push-over solenoid system Technical data DN 12 - 25 mm Ori ce Brass Body material Polyamide Coil material B (H on request) Coil insulation class Stainless steel, brass Valve internals NBR, PTFE seat seal (FKM on request) Seal material Neutral media, compressed air, water, hydraulic oil Media C10 to +90 ! Media temperature Max. +55 ! Ambient temperature !10 Voltage tolerance 100% continuous rating Duty cycle Tag connector acc. to DIN EN 175301-803 Electrical connection (previously DIN 43650 ) Form A (see Ordering chart for accessory on next page) IP 65 with cable plug Protection class As required, preferably with actuator upright Installation Response times 20-400  Opening [ms] 100-1500 (depending on ori ce and differential  Closing [ms] pressure) Ordering chart for valves (other versions on request) Brass body, without cable plug Item no. per voltage/frequency [V/Hz]  ce [mm] /h] 3 Circuit function Port connection Ori Kv value water [m 024/DC 024/50 230/50 Pressu