Burkert valve Water and other neutral media Type 5282 - Servo-assisted solenoid valve

2/2-way Solenoid Valve
with servo diaphragm
 Pivoted armature pilot drive with manual override
 Magnetic drive completely isolated from fluid by  
 diaphragm
 Circuit function can be changed (NC or NO)
 Adjustable switching times (anti-waterhammer)
  Tolerates slightly contaminated and aggressive  uids

Technical data
DN 13 - 65 mm
Ori ce
Body material
Brass acc. to DIN EN 50930-6, stainless steel 1.4581
 Threaded port
Stainless steel 1.4541
 Flange
Epoxy
Coil encapsulation material
H
Coil insulation class
NBR, EPDM, FKM
Seal material
Medium
Neutral  uid, such as compressed air, water, hydraulic oil
 NBR
Oil and fat-free  uid, e.g. alcaline solutions, hot water
 EPDM
Hot air, peracetic acid, hot oil
 FKM
Medium temperature
0 to +80 !
 NBR
-30 to +90 !
 EPDM
0 to +90 !
 FKM
Max. +55 !
Ambient temperature
!10
Voltage tolerance
100% duty cycle
Duty cycle
Cable plug acc. DIN EN 175301-803 Form A
Electrical connection
(previously DIN 43650)
IP 65 with cable plug
Protection class
as required, preferably connected upright
Installation

Ordering chart for valves (other versions on request)
Brass body, threaded port, with manual override, without cable plug
Item no. per voltage/frequency [V/Hz]
/h]
3
Weight
Circuit function 024/DC 024/50-60 230/50-60
Nominal  pressure [bar] [kg]
Port connection Orifice [mm] Kv value water [m
A
Brass body, threaded port, seal material NBR
G 1/213.04.00.2 C 100.95134 430134 431134 43
G 3/420.06.50.2 C 101.40134 434134 435134 43
G 125.010.00.2 C 101.85134 438134 439134 44
G 1 1/432.020.00.2 C 102.60134 442134 443134 44
2/2-way valve,NC
G 1 1/240.020.00.2 C 103.05134 446134 447134 44
G 250.040.00.2 C 105.15134 450134 451134 45
or
G 2 1/265.040.00.2 C 105.90134 454134 455134 45
by turning the pilot
Brass body, threaded port, seal material EPDM
drive through 180!
G 1/213.04.00.2 C 100.95134 458134 459134 46
G 3/420.06.50.2 C 101.40134 462134 463134 46
B
G 125.010.00.2 C 101.85134 466134 467134 46
G 1 1/432.020.00.2 C 102.60134 470134 471134 47
G 1 1/240.020.00.2 C 103.05134 474134 475134 47
G 250.040.00.2 C 105.15134 478134 479134 48
2/2-way valve,NO
G 2 1/265.040.00.2 C 105.90134 482134 483134 48
Brass body, threaded port, seal material FKM
G 1/213.04.00.2 C 100.95134 486134 487134 48
G 3/420.06.50.2 C 101.40134 490134 491134 49
G 125.010.00.2 C 101.85134 494134 495134 49
G 1 1/432.020.00.2 C 102.60134 498134 499134 50
G 1 1/240.020.00.2 C 103.05134 502134 503134 50
G 250.040.00.2 C 105.15134 506134 507134 50
G 2 1/265.040.00.2 C 105.90134 510134 511134 51

Stainless steel body, threaded port or flange, with manual override, without cable plug
Item no. per voltage/frequency [V/Hz]
/h]
3
Circuit function Weight 024/DC 024/50-60 230/50-60
Port connection Orifice [mm] Kv value water [m Nominal  pressure [bar] [kg]
A
Stainless steel, threaded port, seal material NBR
G 3/420.05.00.2 C 101.40137 142137 143137 14
G 125.010.00.2 C 101.80137 146137 147137 14
G 1 1/432.020.00.2 C 102.25137 150137 151137 15
G 1 1/240.020.00.2 C 102.70137 154137 155137 15
2/2-way valve, NC
G 250.040.00.2 C 104.80137 158137 159137 16
Stainless steel, threaded port, seal material FKM
G 1/213.04.00.2 C 100.91220 291220 292220 29
G 3/420.05.00.2 C 101.40134 518134 519134 52
or
G 125.010.00.2 C 101.80134 522134 523134 52
by turning the pilot
G 1 1/432.020.00.2 C 102.25134 526134 527134 52
drive through 180!
G 1 1/240.020.00.2 C 102.70134 530134 531134 53
G 250.040.00.2 C 104.80134 534134 535134 53
B
Stainless steel, threaded port, seal material EPDM
G 1/213.04.00.2 C 100.91220 297220 298220 30
G 3/420.05.00.2 C 101.40145 709141 71
G 125.010.00.2 C 101.80141 078146 16
2/2-way valve, NO
G 1 1/432.020.00.2 C 102.25438 559147 80
G 1 1/240.020.00.2 C 102.70141 66 139 823
G 250.040.00.2 C 104.80141 07 146 530
Stainless steel  ange acc. DIN 2501 with FKM
Flange25.010.00.2 C 103.65134 554134 555134 55
Flange32.020.00.2 C 106.45134 558134 559134 56
Flange40.020.00.2 C 107.05134 562134 563134 56
Flange50.040.00.2 C 1010.5134 566134 567134 56
Stainless steel  ange acc. DIN 2501 with EPDM
Flange25.010.00.2 C 103.65134 570134 571134 57
Flange32.020.00.2 C 106.45134 574134 575134 57
Flange40.020.00.2 C 107.05134 578134 579134 58
Flange50.040.00.2 C 1010.5134 582134 583134 58

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: