Honeywell Solenoid valves for potable water AT-series
The 2/2-way valves of the AT-series are suitable for potable water and is not dependent operationally on a specific minimum differential pressure, and right through to maximum pressure.
Valve application | liquid |
Materials | Casing: brass Internal parts: stainless steel Membrane: EPDM |
Media temp. | 0 ... 120 oC |
Ambient temperature | -10 ... 55 oC |
Operating mode | normally closed |
Power supply | 230V 50Hz |
Certificates | VDE-approval according EN 60730 up to 50 degree |
Working range | 0 ... 10 bar |
Additional description | Other supply voltages are possible on request |
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably
with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in
plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches
Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health
DN Size mm: 10
Kvs value: 1.8
Connections: G3/8
Technical data
Type: 2/2-way
Operating mode: normally closed
Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed.
Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner.
Materials: Casing: b
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably
with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in
plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches
Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health
DN Size mm: 13
Kvs value: 3.5
Connections: G1/2
Technical data
Type: 2/2-way
Operating mode: normally closed
Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed.
Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner.
Materials: Casing: b
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably
with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in
plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches
Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health
DN Size mm: 20
Kvs value: 8.8
Connections: G3/4
Technical data
Type: 2/2-way
Operating mode: normally closed
Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed.
Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner.
Materials: Casing: b
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably
with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in
plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches
Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health
DN Size mm: 25
Kvs value: 11
Connections: G1
Technical data
Type: 2/2-way
Operating mode: normally closed
Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed.
Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner.
Materials: Casing: bras
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably
with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in
plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches
Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health
DN Size mm: 25
Kvs value: 11
Connections: G1 1/4
Technical data
Type: 2/2-way
Operating mode: normally closed
Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed.
Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner.
Materials: Casing:
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably
with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in
plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches
Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health
DN Size mm: 40
Kvs value: 30
Connections: G1 1/2
Technical data
Type: 2/2-way
Operating mode: normally closed
Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed.
Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner.
Materials: Casing:
This range of high-quality solenoid valves is not dependent on a specific minimum differential pressure; the valves operate extremely reliably
with no pressure, at slight differential pressure, right through to maximum pressure. They are therefore the valves of choice for installation in
plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The AT valve series may only be used for media free from oil and grease, such as drinking water, hot water or alkaline detergents and bleaches
Solenoid valves of the AT series are VDE-approved according to EN 60730 as electrically operated water valves up to 50°C。Furthermore, the EPDM sealing material satisfies the “KTW” (plastics in drinking water) recommendations of the German Department of Health
DN Size mm: 40
Kvs value: 30
Connections: G2
Technical data
Type: 2/2-way
Operating mode: normally closed
Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed.
Pressure range:0 – 10 bar, also suitable for vacuum of up to -0.9 bar. No back-pressure may occur as the valve will open in an uncontrolled manner.
Materials: Casing: bras
Showing 1 to 7 of 7 (1 Pages)