Honeywell Solenoid valves for hot water, steam, up to 120 degree LG-series Flange connection L25G31F

Fema piston-type solenoid valves of the LG series are particularly suitable for use as stop and safety check valves in heating installations

up to 120°C or 180°C.

The coupled (automatically servo-controlled) mode of operation does not require a minimum differential pressure; the units open and close

without difficulty even without pressure or with low differential pressures.

DN size mm: 25

Kvs value: 10

Static pressure: N40

Working range bar: 0…20

Connections: flange

Technical data

Type: 2/2-way

Operating mode: normally closed

Type of construction: Piston-type solenoid valve, coupled,, no minimum differential pressure required, TÜV-tested to DIN 32730, Type test approval mark (DIN reg. no.) see Product Summary

Materials: Casing: Bronze Rg 5 to DIN 1705

Internal parts: Brass (CuZn40Pb) and corrosion-resistant steel

Sealing materials: Piston: Teflon (PTFE).

Nozzle: Cone made of stainless steel.

Static seal: EPDM

Mounting position: Standard version: Solenoid system preferably upright. Horizontal mounting position possible for DN 15 to DN 32. For DN 40 and 50 a horizontal mounting position is not permitted. The solenoid system should not hang downwards.

Outdoor installations fr = suitable for outdoor use

Ambient temperature: 4°C to +60°C

Temperature of medium: 120°C/180°C maximum

Working pressure: See Product Summary

Flanges

To DIN 2501 Part 1

PN 40 for DN 15–32

PN 25 for DN 40/50

Recommended weld-on flange

PN 40 to DIN 2635

Maintenance

The valve should be operated 5-10 times per month to prevent