Honeywell Solenoid valves for gaseous and liquid medium GB-series

This range of solenoid valves is of high quality and suitable for universal application, and is not dependent on a specific minimum differential pressure; the valves operate correctly with no pressure, at slight differential pressure, right,through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The valves are also suitable for use in heating and cooling circuits DN size mm: 12 Kvs value: 2.8 Connections: G1/2 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Materials: Casing: brass, internal parts: stainless steel Alternatively: Casing: stainless steel 1.4410, internal parts: stainless steel Sealing material: Perbunan (standard version), EPDM or FPM (Viton) available on request Mounting position: Any, solenoid system preferably upright Temperature of medium: -10°C to 90°C, Max. ambient temperature, 55°C Max. viscosity, Approx. 21 mm/s Power consumption: 100 to 120 VA (start), 25 VA / 12 W (operation)

This range of solenoid valves is of high quality and suitable for universal application, and is not dependent on a specific minimum differential pressure; the valves operate correctly with no pressure, at slight differential pressure, right,through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The valves are also suitable for use in heating and cooling circuits DN size mm: 12 Kvs value: 2.8 Connections: G1/2 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Materials: Casing: brass, internal parts: stainless steel Alternatively: Casing: stainless steel 1.4410, internal parts: stainless steel Sealing material: Perbunan (standard version), EPDM or FPM (Viton) available on request Mounting position: Any, solenoid system preferably upright Temperature of medium: -10°C to 90°C, Max. ambient temperature, 55°C Max. viscosity, Approx. 21 mm/s Power consumption: 100 to 120 VA (start), 25 VA / 12 W (operation)

This range of solenoid valves is of high quality and suitable for universal application, and is not dependent on a specific minimum differential pressure; the valves operate correctly with no pressure, at slight differential pressure, right,through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The valves are also suitable for use in heating and cooling circuits DN size mm: 20 Kvs value: 5 Connections: G3/4 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Materials: Casing: brass, internal parts: stainless steel Alternatively: Casing: stainless steel 1.4410, internal parts: stainless steel Sealing material: Perbunan (standard version), EPDM or FPM (Viton) available on request Mounting position: Any, solenoid system preferably upright Temperature of medium: -10°C to 90°C, Max. ambient temperature, 55°C Max. viscosity, Approx. 21 mm/s Power consumption: 100 to 120 VA (start), 25 VA / 12 W (operation) Op

This range of solenoid valves is of high quality and suitable for universal application, and is not dependent on a specific minimum differential pressure; the valves operate correctly with no pressure, at slight differential pressure, right,through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The valves are also suitable for use in heating and cooling circuits DN size mm: 20 Kvs value: 5 Connections: G3/4 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Materials: Casing: brass, internal parts: stainless steel Alternatively: Casing: stainless steel 1.4410, internal parts: stainless steel Sealing material: Perbunan (standard version), EPDM or FPM (Viton) available on request Mounting position: Any, solenoid system preferably upright Temperature of medium: -10°C to 90°C, Max. ambient temperature, 55°C Max. viscosity, Approx. 21 mm/s Power consumption: 100 to 120 VA (start), 25 VA / 12 W (operation) Op

This range of solenoid valves is of high quality and suitable for universal application, and is not dependent on a specific minimum differential pressure; the valves operate correctly with no pressure, at slight differential pressure, right,through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The valves are also suitable for use in heating and cooling circuits DN size mm: 25 Kvs value: 10 Connections: G1 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Materials: Casing: brass, internal parts: stainless steel Alternatively: Casing: stainless steel 1.4410, internal parts: stainless steel Sealing material: Perbunan (standard version), EPDM or FPM (Viton) available on request Mounting position: Any, solenoid system preferably upright Temperature of medium: -10°C to 90°C, Max. ambient temperature, 55°C Max. viscosity, Approx. 21 mm/s Power consumption: 100 to 120 VA (start), 25 VA / 12 W (operation) Ope

This range of solenoid valves is of high quality and suitable for universal application, and is not dependent on a specific minimum differential pressure; the valves operate correctly with no pressure, at slight differential pressure, right,through to maximum pressure. They are therefore the valves of choice for installation in plants where differential pressures fluctuate greatly and are not possible to determine precisely in advance. The valves are also suitable for use in heating and cooling circuits DN size mm: 25 Kvs value: 10 Connections: G1 Technical data Type: 2/2-way Operating mode: normally closed Type of construction: Diaphragm solenoid valve, coupled. No initial pressure needed. Materials: Casing: brass, internal parts: stainless steel Alternatively: Casing: stainless steel 1.4410, internal parts: stainless steel Sealing material: Perbunan (standard version), EPDM or FPM (Viton) available on request Mounting position: Any, solenoid system preferably upright Temperature of medium: -10°C to 90°C, Max. ambient temperature, 55°C Max. viscosity, Approx. 21 mm/s Power consumption: 100 to 120 VA (start), 25 VA / 12 W (operation) Ope