Parker ROUND BODY PNEUMATIC CYLINDERS

The Parker P1A series of pneumatic cylinders are intended for use in a wide range of applications. These cylinders are particularly suitable for lighter duties in the packaging, food, and textile industries. Hygienic design, the use of corrosion-resistant materials, and initial lubrication with our food-grade grease, makes the air cylinders suitable for food industry applications. Construction: Stainless Steel Body, Anodized Aluminum End Caps. Stainless Steel Piston Rod Dimensions: Standard Mini ISO 6432 Mounting Styles: Nose Mount and Pivot Mount are standard. Modular accessories are available to configure the following mounts: Front / Rear Flange Foot Mounting Head Trunnion Mounting Bore Sizes: 10 – 25mm Piston Rod Diameters: 4 – 10mm Piston Rod Ends: Male Rod Standard, Specials Available Stroke Lengths: 10 – 500mm, Bore Size Dependent Cushions: Optional at Either End Bumpers: Standard Piston: Magnetic Standard Nominal Pressure: 10 Bar (145 PSI) Standard Fluid: Dry, Filtered Lubricated or Non Lubricated Air Standard Operating Temperature: -20°C to +80°C, +4°F to 176°F Optional High Temperature: -10°C to +120°C, 14°F to +248°F (10,12, and 16mm Bore)

Construction: Round Body Repairable Cylinder. Extruded, anodized aluminum body, heads and caps 20mm 100mm bore. Bore Sizes: 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm & 100mm Strokes: Available up to 1000mm standard, consult factory for longer strokes Piston Rod Diameters: 8mm 32mm Operating Medium: Pneumatic, 10 Bar Standard Fluid: Filtered Air Piston Rod Ends: 2 standard, specials to order Single or double piston rod ends available Mounting styles: 12 standard Standard Operating Temperature: -23C to + 74C Optional High Temperature Option: -23C to + 121C Additional Options: --- Adjustable Cushions head end, cap end, or both ends (Captive Design) --- Mountings can be inch or metric --- Ports can be NPTF or BSPP --- Magnetic Piston Sensing Design Features: --- Corrosion Resistant Aluminum Construction Throughout --- Impact Resistant Bumpers Standard --- Self Compensating Rod Wiper and Seal --- Rated for Non Lube Service

Construction: Square Head and Cap, Tie Rod Design, Stainless Steel Heads, Caps, Cylinder Body, Tie Rods and Piston Rods Bore Sizes: 1-1/8, 1-1/2, 2, 2-1/2, 3-, 4, 5, 6, 8 Standards: NFPA Interchangeable (ANSI/NFPA T.3.6.7R2-1996) 1-1/2 8 Strokes: Available in any practical stroke length Ports: NPTF Ports are standards Piston Rod Diameters:3/8, , 5/8, 1, 1-3/8, and 1-3/4 Operating Medium: Pneumatic, 250 PSI Standard Fluid: Filtered Air Piston Rod Ends: Standard Male, Intermediate Male, Female, Specials to order Single or double piston rod ends available Mounting styles: 8 standard NFPA mounting styles available Standard Operating Temperature: -40F to + 200F Optional High Temperature Option: -10F to + 250F Additional Options: --- Bumpers at both head and cap end or either end --- Adjustable Cushions at both head and cap end or either end --- Full line of mounting accessories --- Stop Tubing --- Magnetic Piston Sensing --- Port Relocation (other than standard) Design Features: --- Stainless Steel Construction for Superior Corrosion Resistance --- Rated for Non Lube Service Description Value PRODUCT TYPE

Construction: Crimped Round Body, Stainless Steel Tube, Aluminum End Caps, Non-Repairable Bore Sizes: 5/16, 7/16, 9/16, , 7/8, 1-1/16, 1-1/4, 1-1/2, 1-3/4, 2, 2-1/2, 3 Standards: Industry Interchangeable Strokes: 1/2 32, Bore Size & Mounting Style Dependant Ports: NPTF Ports Standard Piston Rod Diameters: .125, .188, .250, .312, .437, .50, .625, .750 Piston Rod Material: Stainless Steel (Up to 1.5 Bore), Carbon Steel (1.75 3.0 Bore) Piston Rod Ends: Standard Male, Specials To Order Operating Medium: Pneumatic, 250 PSI Standard Fluid: Filtered Air Single or double piston rod ends available Single Acting or Double Acting Versions Mounting styles: 28 Standard Standard Operating Temperature: -10F to + 165F Optional High Temperature Option: -10F to + 250F Additional Options: --- Bumpers (standard on selected bore sizes) --- Adjustable Cushions; head end, cap end, or both ends (Bore Size Dependant) --- Rod Wiper --- Full line of mounting accessories --- Extra or no Wrench Flats --- Port Relocation (other than standard) --- Private Label Design Features: --- 304 Stainless Steel Body with Aluminum End Caps for Corrosion Resistance --- R

Construction: Crimped Round Body, Stainless Steel Tube, Delrin (Acetal Resin) End Caps, Non-Repairable Bore Sizes: 9/16, , 1-1/16, 1-1/2, and 2 Standards: Industry Interchangeable Strokes: 1 32, Bore Size & Mounting Style Dependant Ports: NPTF Ports Standard Piston Rod Diameters:.188, .250, .312, .437, .50, .625 Piston Rod Material: Stainless Steel Piston Rod Ends: Standard Male, Specials to Order Operating Medium: Pneumatic, 100 PSI Standard Fluid: Filtered Air Single or double piston rod ends available Mounting styles: 3 Standard Standard Operating Temperature: 32F to + 140F Additional Options: --- Bumpers --- Magnetic Piston Sensing --- Rod Wiper --- Full line of Stainless Steel Mounting Accessories --- Special Rod Ends Available --- Extra or no Wrench Flats --- Port Relocation (other than standard) --- Private Label Design Features: --- Unitized Construction --- 304 Stainless Steel Body with Delrin Acetal Resin) End Caps for Corrosion Resistance --- Rated for Non Lube Service --- Rolled Rod Threads --- Lip Seal Piston --- Oil Impregnated Rod Bushing --- Delrin is a registered trademark of Dupont

Construction: Crimped Round Body, Stainless Steel Tube, Delrin (Acetal Resin) End Caps, Non-Repairable Bore Sizes: 9/16, , 1-1/16, 1-1/2, and 2 Standards: Industry Interchangeable Strokes: 1 32, Bore Size & Mounting Style Dependant Ports: NPTF Ports Standard Piston Rod Diameters:.188, .250, .312, .437, .50, .625 Piston Rod Material: Stainless Steel Piston Rod Ends: Standard Male, Specials to Order Operating Medium: Pneumatic, 100 PSI Standard Fluid: Filtered Air Single or double piston rod ends available Mounting styles: 3 Standard Standard Operating Temperature: 32F to + 140F Additional Options: --- Bumpers --- Magnetic Piston Sensing --- Rod Wiper --- Full line of Stainless Steel Mounting Accessories --- Special Rod Ends Available --- Extra or no Wrench Flats --- Port Relocation (other than standard) --- Private Label Design Features: --- Unitized Construction --- 304 Stainless Steel Body with Delrin Acetal Resin) End Caps for Corrosion Resistance --- Rated for Non Lube Service --- Rolled Rod Threads --- Lip Seal Piston --- Oil Impregnated Rod Bushing --- Delrin is a registered trademark of Dupont

Construction: Crimped Round Body, Stainless Steel Tube, Aluminum End Caps, Non-Repairable Magnetic Piston Sensing Standard Bore Sizes: 9/16, , 1-1/16, 1-1/4, 1-1/2, 1-3/4, 2, 2-1/2 Standards: Industry Interchangeable Strokes: 32, Bore Size & Mounting Style Dependant Ports: NPTF Ports Standard Piston Rod Diameters: .188, .250, .312, .437, .50, .625 Piston Rod Material: Stainless Steel (Up to 1.5 Bore), Carbon Steel (1.75 2-1/2 Bore) Piston Rod Ends: Standard Male. Specials to order Operating Medium: Pneumatic, 250 PSI Standard Fluid: Filtered Air Single or double piston rod ends available Single Acting or Double Acting Versions Mounting styles: 24 Standard Standard Operating Temperature: +14F to + 140F Additional Options: --- Bumpers (standard on selected bore sizes) --- Adjustable Cushions; head end, cap end, or both ends (Bore Size Dependant) --- Rod Wiper --- Full line of mounting accessories --- Special Rod Ends Available --- Extra or no Wrench Flats --- Port Relocation (other than standard) --- Private Label Design Features: --- 304 Stainless Steel Body with Aluminum End Caps for Corrosion Resistance --- Rated for Non Lube Se

Construction: Crimped Round Body, Stainless Steel Tube, Non Repairable, with built in LRT for continuous feedback Bore Sizes: 1.06, 1.50, 2.00, 2.50, and 3.00 Standards: Industry Interchangeable Strokes: Available in any practical stroke length up to 24 Piston Rod Diameters: .38, .50, .62, and .75 Piston Rod Ends: Male Standard, Specials To Order Operating Medium: Pneumatic, 150 PSI Standard Fluid: Filtered Air Mounting styles: 3 standard Standard Operating Temperature: +40F to + 160F Ports: NPTF Standard Additional Options: --- Bumpers --- 3 Pin Plug Connector --- Low Friction Seals --- 3 Different Controller Options Available Design Features: --- 304 Stainless Steel Tube with Aluminum End Caps for Corrosion Resistance --- LRT can be removed and replaced in the event of failure --- Outboard Rod / Wiper Seal --- Rated for Non Lube Service