Koganei cylinder side slide Slit Type Rodless Cylinder ORW Series

･Highly rigid type with two linear guides.
･Shock absorber units are standard equipment.
･Direct mounting at the end plate and mounting the T slots on the bottom improves the mounting flexibility.

Solid state type (ZE135, ZE155)
C
B
14 [0.551]
178 [3.071]
ORW16, MRW16
198 [3.858] 174.5 [2.933]
19 [0.748]
100 [3.937]
ORW25, MRW25
125 [4.921] 196.5 [3.799]
22 [0.866]
137 [5.394]
ORW40, MRW40
165 [6.496] 133.5 [5.256]Reed switch type (ZE101, ZE102)
D
C
174 [2.913]
171.5 [2.815]
14 [0.551]ORW16, MRW16
98 [3.858]
196 [3.780]
193.5 [3.681]
19 [0.748]ORW25, MRW25
125 [4.921]
133 [5.236]
130.5 [5.138]
22 [0.866]ORW40, MRW40
165 [6.496]

Bore mm	Stroke mm	Port
16-40	100-1000	M5.Rc1/8 Rc1/4

SLIT TYPE RODLESS CYLINDERS
SERIES
MAGNET TYPE RODLESS CYLINDERS
SERIES

SLIT TYPE RODLESS CYLINDERSEquivalent bore size:16,25, 40
[0.630in.][0.984in.][1.575in.]
MAGNET TYPE RODLESS CYLINDERSBore size:16,25, 40
[0.630in.][0.984in.][1.575in.]
Pitching (Mp)
High rigidity
Yawing (My)Pitching moment:
(ORW40 MRW40)
,
N m [136ft lbf]
185Rolling moment:
(ORW40 MRW40)
,
N m [148ft lbf]
200Yawing moment:
(ORW40 MRW40)
,
N m [136ft lbf]
185
Remark: Rodless cylinders ORS and MRS series:Pitching moment:60Nm [44ftlbf] (ORS40, MRS40)
Rolling (Mr)Rolling moment:50Nm [37ftlbf] (ORS40, MRS40)Yawing moment:60Nm[44ftlbf] (ORS40, MRS40)
Shock absorber units are standard equipment.
Uses embedded type sensor switch
Specified stroke 10mm [0.394in.]
Since the shock absorber can be used for
fine stroke adjustment of 5mm [0.197in.]
for one side, it totally offers a 10mm
[0.394in.] margin in regards to the
specified stroke.
Piping concentrated on one side
Since shock absorber unit provides position-Concentrated connection ports as standard
ing of the end of the stroke, it enhancesequipment save space.
Easily and clearly pulling out lead wires from
absorbing capacity to the maximum extent.
the grooves on the body.
The shock absorber does not protrude
beyond the end plate. Moreover, moving the
shock absorber unit is all that is required to
adjust the stroke all along its range.

Used guide
Note
Note
Guide manufacture
Model
Guide model
ORW16, MRW16
LWL12
IKO
ORW25, MRW25
LWL15
Nippon Thompson Co., Ltd.
ORW40, MRW40
LWES15 

Specifications
Equivalent bore size mm [in.]
16 [0.630] 25 [0.984] 40 [1.575]
Item
Note 1
Media
Air
Operation type
Double acting type
Operating pressure rangeMPa [psi.]
0.150.8 [22116]
Proof pressureMPa [psi.]
1.2 [174]
Operating temperature range°,C [°,
060 [32140]
Note 2 Note 2 Note 2
Operating speed rangemm/s [in./sec.]
1501000 [5.939.4] (1502000 [5.978.7]) 1001000 [3.939.4] (1002000 [3.978.7]) 1001000 [3.939.4] (1001500 [3.959.1])
Cushion
Shock absorber (Standard equipment on both ends)
Cylinder portion
Not required (If lubrication is required, use Turbine Oil Class 1 [ISO VG32] or equivalent.)
Lubrication
Guide portion
Required (Lithium soap-based grease)
Repeatability mm [in.]0.05 [0.002]
Note 3
mm [in.]
Parallelism
0.3 [0.012]
Attachment holder   mm [in.]
Stroke
Adjustable over the entire stroke
Shock absorber       mm [in.]
Adjusting range
Fine adjustmentOne side(R)C5 [(R)C0.190.197]
Maximum stroke mm
2000
Note 4
Maximum load capacity N [lbf.]
130 [29] 300 [67] 600 [135]
Port size
M50.8 Rc1/8 Rc1/4

Code
Model
(for  16 [0.630in.])
KSHJ10 10-01,KSHJ10 10-02
(for  25 [0.984in.])
KSHJ14 12-01,KSHJ14 12-02
(for  40 [1.575in.])
KSHJ20 16-01,KSHJ20 16-02

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: