Series 32 cylinders - Tandem and Multi-position

Construction compact profile Operation double-acting, magnetic Material body and end-blocks = anodized AL rod = rolled stainless steel AISI 303 piston = anodized AL rod seal, OR end-block and piston seal = PU Mounting with threaded holes on the end blocks flange – feet – trunnion Strokes min. and max. (1) Multiposition Series 32F, 32M Ø 25 = 5-300 mm (dimension x2) Series 32F, 32M Ø 40 - 63 = 5-400 mm (dimension x2) Series 32F, 32M Ø 100 = 5-500 mm (dimension x2) Strokes min. and max. (1) Tandem Series 32F, 32M Ø 25 = 5-80 mm Series 32F, 32M Ø 40 - 63 - 100 = 5-100 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operating speed 10 ÷ 1000 mm\sec (without load) Code Title Type Operation Stroke (multi-position) Diameter (mm) 32F2A025A10/15N Mu

Construction compact profile Operation double-acting, magnetic Material body and end-blocks = anodized AL rod = rolled stainless steel AISI 303 piston = anodized AL rod seal, OR end-block and piston seal = PU Mounting with threaded holes on the end blocks flange – feet – trunnion Strokes min. and max. (1) Multiposition Series 32F, 32M Ø 25 = 5-300 mm (dimension x2) Series 32F, 32M Ø 40 - 63 = 5-400 mm (dimension x2) Series 32F, 32M Ø 100 = 5-500 mm (dimension x2) Strokes min. and max. (1) Tandem Series 32F, 32M Ø 25 = 5-80 mm Series 32F, 32M Ø 40 - 63 - 100 = 5-100 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operating speed 10 ÷ 1000 mm\sec (without load)   Code Title Type Operation Stroke (mm) Diameter (mm) 32M2A040A03

Construction compact profile Operation double-acting, magnetic Material body and end-blocks = anodized AL rod = rolled stainless steel AISI 303 piston = anodized AL rod seal, OR end-block and piston seal = PU Mounting with threaded holes on the end blocks flange – feet – trunnion Strokes min. and max. (1) Multiposition Series 32F, 32M Ø 25 = 5-300 mm (dimension x2) Series 32F, 32M Ø 40 - 63 = 5-400 mm (dimension x2) Series 32F, 32M Ø 100 = 5-500 mm (dimension x2) Strokes min. and max. (1) Tandem Series 32F, 32M Ø 25 = 5-80 mm Series 32F, 32M Ø 40 - 63 - 100 = 5-100 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operating speed 10 ÷ 1000 mm\sec (without load) Code Title Type Operation Stroke (multi-position) Diameter (mm) 32F2A100A60/140N M

Construction compact profile Operation double-acting, magnetic Material body and end-blocks = anodized AL rod = rolled stainless steel AISI 303 piston = anodized AL rod seal, OR end-block and piston seal = PU Mounting with threaded holes on the end blocks flange – feet – trunnion Strokes min. and max. (1) Multiposition Series 32F, 32M Ø 25 = 5-300 mm (dimension x2) Series 32F, 32M Ø 40 - 63 = 5-400 mm (dimension x2) Series 32F, 32M Ø 100 = 5-500 mm (dimension x2) Strokes min. and max. (1) Tandem Series 32F, 32M Ø 25 = 5-80 mm Series 32F, 32M Ø 40 - 63 - 100 = 5-100 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operating speed 10 ÷ 1000 mm\sec (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32F2A025A005N2 Tandem cylinder

Construction compact profile Operation double-acting, magnetic Material body and end-blocks = anodized AL rod = rolled stainless steel AISI 303 piston = anodized AL rod seal, OR end-block and piston seal = PU Mounting with threaded holes on the end blocks flange – feet – trunnion Strokes min. and max. (1) Multiposition Series 32F, 32M Ø 25 = 5-300 mm (dimension x2) Series 32F, 32M Ø 40 - 63 = 5-400 mm (dimension x2) Series 32F, 32M Ø 100 = 5-500 mm (dimension x2) Strokes min. and max. (1) Tandem Series 32F, 32M Ø 25 = 5-80 mm Series 32F, 32M Ø 40 - 63 - 100 = 5-100 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operating speed 10 ÷ 1000 mm\sec (without load) Code Title Type Operation Stroke (multi-position) Diameter (mm) 32F2A040A10/110N M

Construction compact profile Operation double-acting, magnetic Material body and end-blocks = anodized AL rod = rolled stainless steel AISI 303 piston = anodized AL rod seal, OR end-block and piston seal = PU Mounting with threaded holes on the end blocks flange – feet – trunnion Strokes min. and max. (1) Multiposition Series 32F, 32M Ø 25 = 5-300 mm (dimension x2) Series 32F, 32M Ø 40 - 63 = 5-400 mm (dimension x2) Series 32F, 32M Ø 100 = 5-500 mm (dimension x2) Strokes min. and max. (1) Tandem Series 32F, 32M Ø 25 = 5-80 mm Series 32F, 32M Ø 40 - 63 - 100 = 5-100 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operating speed 10 ÷ 1000 mm\sec (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32F2A063A060N2 Tandem cylinder

Construction compact profile Operation double-acting, magnetic Material body and end-blocks = anodized AL rod = rolled stainless steel AISI 303 piston = anodized AL rod seal, OR end-block and piston seal = PU Mounting with threaded holes on the end blocks flange – feet – trunnion Strokes min. and max. (1) Multiposition Series 32F, 32M Ø 25 = 5-300 mm (dimension x2) Series 32F, 32M Ø 40 - 63 = 5-400 mm (dimension x2) Series 32F, 32M Ø 100 = 5-500 mm (dimension x2) Strokes min. and max. (1) Tandem Series 32F, 32M Ø 25 = 5-80 mm Series 32F, 32M Ø 40 - 63 - 100 = 5-100 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operating speed 10 ÷ 1000 mm\sec (without load) Code Title Type Operation Stroke (multi-position) Diameter (mm) 32F2A063A10/110N M

Construction compact profile Operation double-acting, magnetic Material body and end-blocks = anodized AL rod = rolled stainless steel AISI 303 piston = anodized AL rod seal, OR end-block and piston seal = PU Mounting with threaded holes on the end blocks flange – feet – trunnion Strokes min. and max. (1) Multiposition Series 32F, 32M Ø 25 = 5-300 mm (dimension x2) Series 32F, 32M Ø 40 - 63 = 5-400 mm (dimension x2) Series 32F, 32M Ø 100 = 5-500 mm (dimension x2) Strokes min. and max. (1) Tandem Series 32F, 32M Ø 25 = 5-80 mm Series 32F, 32M Ø 40 - 63 - 100 = 5-100 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operating speed 10 ÷ 1000 mm\sec (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32M2A100A080N2 Tandem cylinder