Series 32 cylinders

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32M2A032A400 Compact magnetic cylinders Mod. 32F and 32M Compact cylin

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32M4A080A015 Compact magnetic cylinders Mod. 32F and 32M Compact cylin

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32M2A040A400 Compact magnetic cylinders Mod. 32F and 32M Compact cylin

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32F1A063A010 Compact magnetic cylinders Mod. 32F and 32M Compact cylin

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32F3A020A005 Compact magnetic cylinders Mod. 32F3 and 32M3 Compact cylinde

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32F3A025A005 Compact magnetic cylinders Mod. 32F3 and 32M3 Compact cylinde

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Operation Stroke (mm) Diameter (mm) 32M3A032A100 Compact magnetic cylinders Mod. 32F3 and 32M3 double-acting 100 32

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Operation Stroke (mm) Diameter (mm) 32M3A040A125 Compact magnetic cylinders Mod. 32F3 and 32M3 double-acting 125 40

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Operation Stroke (mm) Diameter (mm) 32F3A050A005 Compact magnetic cylinders Mod. 32F3 and 32M3 double-acting 5 50

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Operation Stroke (mm) Diameter (mm) 32F3A063A005 Compact magnetic cylinders Mod. 32F3 and 32M3 double-acting 5 63

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Operation Stroke (mm) Diameter (mm) 32F3A080A005 Compact magnetic cylinders Mod. 32F3 and 32M3 double-acting 5 80

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Operation Stroke (mm) Diameter (mm) 32F3A100A005 Compact magnetic cylinders Mod. 32F3 and 32M3 double-acting 5 100

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32F1A020A005 Compact magnetic cylinders Mod. 32F and 32M Compact cylin

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32F1A025A005 Compact magnetic cylinders Mod. 32F and 32M Compact cylin

Construction compact profile Operation single and double acting, magnetic Materials anodized AL body and end-blocks - rolled stainless steel AISI 303 rod anodized AL piston - rod seal, end-block OR and piston seal in PU high temperatures: rod seal, OR end-block and piston in FKM (140°) Mounting with threaded holes on the end blocks flange - feet - trunnion Stroke min and max (1) Series 32F, 32M, 32R Ø20-25 = 5-300 mm Series 32F, 32M, 32R Ø32-40-50-63 = 5-400 mm Series 32F, 32M, 32R Ø80-100 = 5-500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar (double-acting) 2 ÷ 10 bar (single-acting) Fluid clean air without lubrication. If lubricated air is used it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Operation speed 10 ÷ 1000mm/sec. (without load) Code Title Type Operation Stroke (mm) Diameter (mm) 32F1A050A010 Compact magnetic cylinders Mod. 32F and 32M Compact cylin