Type of construction |
with tie-rods |
Operation |
double-acting, single-acting, tandem. Low friction version: double-acting only. |
Materials |
standard: AL end-blocks and piston, rolled stainless steel AISI 420B rod, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, PU seals; low friction: standard materials with NBR piston seals and NBR rod seal (FKM rod seal on request) low temperature: standard materials with chrome plated stainless steel AISI 420B rod, brass rod scraper ring, stainless steel AISI 303 nuts, stainless steel AISI 420B tie-rods, PU piston seals and NBR rod seal |
Type of mounting |
with tie-rods, with front / rear flange, foot mounting, with centre / front / rear / swivel trunnion |
Strokes min - max |
10 ÷ 2500 mm |
Operating temperature |
standard and low friction: 0°C ÷ 80°C (with dry air - 20°C) low temperature (-40°C version): -40°C ÷ 60°C (with dry air -40°C) low temperature (-50°C version): -50°C ÷ 60°C (with dry air -50°C) |
Operating pressure |
1 ÷ 10 bar (standard and low temperature); 0,1 ÷ 10 bar (low friction) |
Speed |
10 ÷ 1000 mm/sec, no load (standard and low temperature); 5 ÷ 1000 mm/sec, no load (low friction) |
Fluid |
filtered air, without lubrication. For standard versions only: if lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. |
|
|
|
|
|
|
|