Series 40 cylinders

Series general data   Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code  Title Type Version  Operation    Diameter (mm)  Stroke (mm)  Rod

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.   Code Title Type Version Operation Diameter (mm) Stroke (mm) Rod seal   40M2L160F0050 Cylinders Series 40 with centre trunnion Mod. F Tie-rods cylinders with centre trunnion standard double

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.       Code Title Type

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.   Code Title Type Version Operation Diameter (mm) Stroke (mm) Rod seal   40M2L200F0050 Cylinders Series 40 with centre trunnion Mod. F Tie-rods cylinders with centre trunnion standard double

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Version Operation Diameter (mm) Stroke (mm) Rod seal   40M2L250A0050 Cylinders Series 40 Tie-rods cylinders standard double-acting 250 50 NBR   4

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Version Operation Diameter (mm) Stroke (mm) Rod seal   40M2L250F0050 Cylinders Series 40 with centre trunnion Mod. F Tie-rods cylinders with centre trunnion standard double-acting

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Version Operation Diameter (mm) Stroke (mm) Rod seal   40M2L320A0050 Cylinders Series 40 Tie-rods cylinders standard TRUE double-acting 320 50 NBR 40M

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Version Operation Diameter (mm) Stroke (mm) Rod seal   40M2L320F0100 Cylinders Series 40 with centre trunnion Mod. F Tie-rods cylinders with centre trunnion standard TRUE double-

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted   Code Title Type Version Operation Diameter (mm) Stroke (mm) Rod seal   40M6L160A0050 Cylinders Series 40 - through-rod Tie-rods cylinders standard double-acting, through-rod 160 50

Series general data     Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Version Operation Diameter (mm) Stroke (mm) Rod seal   40M6L200A0050 Cylinders Series 40 - through-rod Tie-rods cylinders standard doub

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Version Operation Diameter (mm) Stroke (mm) Rod seal   40M6L250A0050 Cylinders Series 40 - through-rod Tie-rods cylinders standard double-acting, through-rod 250 50 NBR

Type of construction with tie-rods Operation double-acting Materials AL end blocks and piston, rolled stainless steel AISI 420B (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) piston rod, zinc-plated steel piston rod nut, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, NBR-PU rod - piston - cushion seals Mounting with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination Strokes min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 500 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Version Operation Diameter (mm) Stroke (mm) Rod seal   40M6L320A0050 Cylinders Series 40 - through-rod Tie-rods cylinders standard TRUE double-acting, through-rod 320 50