actuator air Cylinder Solenoid Valve Transmitter SMC Parker Festo Schrader Miller Bosch Rexroth CKD Knorr Milwaukee Vickers Taiyo Numatics Mosier Allen Humphrey Koganei
Categories
Home » Air Cylinder » Allen Air Cylinder » SMALL BORE CYLINDERS

SMALL BORE CYLINDERS

SMALL BORE CYLINDERS

DESIGN FEATURES
Cylinders are not throw away type. Seals can easily be replaced when required after
a long trouble-free life. They have corrosion resistant brass tubing, precision honed
(16 Micro or better) with cross hatch lubricant retaining pattern. Front and Rear
Heads are precision machined and threaded into the tube.

Pressure Rating: 150 P.S.I. Pneumatic or Hydraulic.
Breakaway: Approximately 5-10 P.S.I.

BASIC CONSTRUCTION
1/2” & 3/4” BORES: Feature low friction U-Cups on the Duronze
Piston, coupled with a 416 Stainless Rod. These Cylinders are available
as standard in half-inch increments.   
to 6” stroke.

1-1/8” BORE: Features an all-O-Ring construction. Aluminum Piston ground
and polished 416 stainless steel rod. Cylinders are available as standard in
half-inch increments to 6” and inch increments to 12” stroke.
Special strokes available in all bore sizes. Up to 14” maximum on 1-1/8” bore and 10” maximum on 1/2” & 3/4” bores.
Display: List / Grid
Show:
Sort By:
Product Compare (0)
TYPE SM SINGLE ENDED
TYPE SM SINGLE ENDED
An all purpose light - duty pneumatic Cylinder designed for nose mounting with rear face porting. 1-1/8" Bore is also available in 300 Series Stainless Steel, TYPE SSSM. See catalog SS200.

Cyl-Check
Cyl-Check
      FEATURES   3000 pounds capacity maximum thrust load. Feed Control available for Forward, Rearward or Both Directions. Feed Rate infinitely variable. Optional Stop and Skip Check features. Optional Threaded Rod Extensions available for rapid traverse. Complete mounting versatility. Precision honed brass body, provides longer seal life. Wear Strip on piston and extra long bearing in front head for prolonged life. Viton Seals to insure long life when heat build-up occurs.     STANDARD STROKES AVAILABLE ARE 2-1/2”, 5”, 6”, 10”, 15” & 20”. SPECIAL STROKES AVAILABLE.   The Allenair Cyl-Check ® is a self-contained oil filled unit which can be used in any tool or work feeding application, eliminating chatter caused by variations in power thrust and irregular loads, providing smooth, uniform and precise feed control. The unit can be coupled with a Pneumatic Cylinder or other linear motion and provides the flexibility required in many applications, without the costly expense of a completely hyd

TYPE SMD DOUBLE ENDED
TYPE SMD DOUBLE ENDED
Similar to above except there is a single rod which protrudes from both ends and as one end retracts the other extends. 1-1/8" Bore is also available in 300 Series Stainless Steel, TYPE SSSMD. See catalog SS200.

TYPE SMT SINGLE ENDED
TYPE SMT SINGLE ENDED
Cylinder is designed for Clevis and various other universal mountings.

TYPE SP SINGLE ENDED
TYPE SP SINGLE ENDED
Similar to Type "SM" except a square front head is used, thereby eliminating the need for a separate Foot Mount.

TYPE SPD DOUBLE ENDED
TYPE SPD DOUBLE ENDED
Similar to Type "SMD" except square heads have been incorporated, eliminating the need for separate Foot Mounts.

Export Company Export Company Export Company Global Trade Leads - Import & Export on our award-winning International Trade Site