SMC Electric Cylinders
Electric actuators from SMC are designed with a focus on easy setup and operation. Key features, including high precision positioning and repeatability characterize the SMC series of electric cylinder products. With no need for compressed air, electric actuators provide movements beyond the capabilities of a pneumatic actuator. And now, a new series of electric actuators, the LE series, adds simplicity of use to other benefits of the electric actuator. Select the "Easy Mode" setting option on your LE series electric actuator, and within minutes of taking it out of the box, your selected electric actuator can be operating efficiently and effectively, The LE line of electric actuators are available in a variety of types. Styles available include slider electric actuators, rod type electric actuators, electric slide table actuators, electric rotary actuators, and electric grippers. Accessories include electric actuator controllers, and gateways.
The 11-LEFS series slider type, ball screw drive electric actuator features built-in vacuum piping along with a body-integrated linear guide specification. Available motors include step motor (servo/24VDC), servo motor (24VDC), and AC servo motor (100/200/400W).
Built-in vacuum piping
Possible to mount the main body without removing external cover
Body-integrated linear guide specification
Motor type: AC servo motor
The 11-LEFS series slider type, ball screw drive electric actuator features built-in vacuum piping along with a body-integrated linear guide specification. Available motors include step motor (servo/24VDC), servo motor (24VDC), and AC servo motor (100/200/400W).
Built-in vacuum piping
Possible to mount the main body without removing external cover
Body-integrated linear guide specification
Motor Type: Step motor (Servo/24 VDC), Servo Motor (24VDC)
The LES series electric slide table actuator uses a compactly-integrated, recirculating linear guide for high rigidity and high precision. When the LES is ordered with the controller, initial data of the actuator is preset in the controller allowing start-up in a short time with the "easy mode". Two types of built-in motors (step or servo) are available. The series can be top or bottom mounted. In addition, the LES series is available in an optional symmetric style (reversed table and cable positions from the standard model).
Available in three sizes: 8, 16, 25
Available motor mounting: basic, symmetrical, in-line motor
Stroke range from 30~150mm
Lightweight formed steel table enables greater vertical loads
SMC's E-MY2 series e-rodless actuators require no programming, and have both the operational ability of an air cylinder, and the speed controllability of an electric actuator. The series consists of the E-MY2B (basic), E-MY2C (cam follower guide), E-MY2H (linear guide, single axis), and the E-MY2HT (linear guide, double axis) styles. Offered in an integrated or remote control type, the E-MY2 is available with 3 or 5-point accurate stop options (2-points for both ends, with the remaining points for any preferred intermediate stops), and a wide selection of standard strokes, speed rates, and applicable loads.
Suitable for light-load transfers
Easy attachement to an external guide via a floating bracket
Optional stroke adjusting unit
Selectable motor mounting position
Auto switch capable
SMC's E-MY2 series e-rodless actuators require no programming, and have both the operational ability of an air cylinder, and the speed controllability of an electric actuator. The series consists of the E-MY2B (basic), E-MY2C (cam follower guide), E-MY2H (linear guide, single axis), and the E-MY2HT (linear guide, double axis) styles. Offered in an integrated or remote control type, the E-MY2 is available with 3 or 5-point accurate stop options (2-points for both ends, with the remaining points for any preferred intermediate stops), and a wide selection of standard strokes, speed rates, and applicable loads.
Cam follower guide type
Nominal size: 16, 25
Standard stroke: 100~1000
3 or 5-point intermediate stops
Easy maintenance
SMC's E-MY2 series e-rodless actuators require no programming, and have both the operational ability of an air cylinder, and the speed controllability of an electric actuator. The series consists of the E-MY2B (basic), E-MY2C (cam follower guide), E-MY2H (linear guide, single axis), and the E-MY2HT (linear guide, double axis) styles. Offered in an integrated or remote control type, the E-MY2 is available with 3 or 5-point accurate stop options (2-points for both ends, with the remaining points for any preferred intermediate stops), and a wide selection of standard strokes, speed rates, and applicable loads.
Linear guide, single and double axis types
Standard strokes (mm): 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600
Movable stroke adjusting unit
Integrated or remote control types
Auto switch capable
SMC's E-MY2 series e-rodless actuators require no programming, and have both the operational ability of an air cylinder, and the speed controllability of an electric actuator. The series consists of the E-MY2B (basic), E-MY2C (cam follower guide), E-MY2H (linear guide, single axis), and the E-MY2HT (linear guide, double axis) styles. Offered in an integrated or remote control type, the E-MY2 is available with 3 or 5-point accurate stop options (2-points for both ends, with the remaining points for any preferred intermediate stops), and a wide selection of standard strokes, speed rates, and applicable loads.
Linear guide, single and double axis types
Standard strokes (mm): 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600
Movable stroke adjusting unit
Integrated or remote control types
Auto switch capable
SMC's LAT3 card motor is a compact, thin (same size as a business card) electric slide table with a linear motor and displacement sensor integrated into one unit. It is compact and lightweight with positioning and measurement capability. The LATC4, card motor controller offers 2 methods of step data setting. Takt time entry allows easy programming by inputting just 3 parameters: positioning time, target position and load mass. Speed entry settings require inputting target position, speed, acceleration, deceleration, and load mass.
The LATC4, card motor controller offers 2 methods of step data setting. Takt time entry allows easy programming by inputting just 3 parameters: positioning time, target position and load mass. Speed entry settings require inputting target position, speed, acceleration, deceleration, and load mass.
Series LC3F2 directional control driver is able to control the stroke with only on/off signals, just like a solenoid valve. Output thrust can be easily altered by simply adjusting its fully integrated trimmer switch. A current control protects the driver/motor from burning out.
Able to control the stroke with only ON/OFF signals
Current control protects the driver/motor from burning
Able to control with only 3 different types of input signals
Able to set thrust arbitrarily
Can be operated manually
The LC6D stepper motor driver is used to drive the stepper motor of the LX electric actuator series. The LC6D position is controlled by pulse signals and the speed is controlled by pulse frequencies. It can be used with any controller that has a configurable high speed pulse output. The built-in auto current down function reduces the motor current to half when the motor stops, which saves energy and prevents the driver and motor from generating heat.
Series LECA6 controller has two available modes for the setting software and teaching box. In the easy mode, the operation can be started by only setting the speed, position, etc. Using the normal mode allows a further detailed setup. A few of the main functions of the LECA6 controller are actuator control, specified force operation, separated power supply, and returning the actuator to the home position by sending a single signal to a dedicated terminal. The LECA6 controls NPN or PNP servo motors.
Motor controller: Step motor (servo/24 VDC), Servo motor (24 VDC)
Compatible with series LEF
Possible to set position, speed & force (64 points)
Screw mounting or DIN rail mounting
Series LECP6 controller has two available modes for the setting software and teaching box. In the easy mode, the operation can be started by only setting the speed, position, etc. Using the normal mode allows a further detailed setup. A few of the main functions of the LECP6 controller are actuator control, specified force operation, separated power supply, and returning the actuator to the home position by sending a single signal to a dedicated terminal. The LECP6 controls NPN or PNP step motors.
Motor controller: Step motor (servo/24 VDC), Servo motor (24 VDC)
Compatible with series LEF
Possible to set position, speed & force (64 points)
Screw mounting or DIN rail mounting
Series LECA6 controller has two available modes for the setting software and teaching box. In the easy mode, the operation can be started by only setting the speed, position, etc. Using the normal mode allows a further detailed setup. A few of the main functions of the LECA6 controller are actuator control, specified force operation, separated power supply, and returning the actuator to the home position by sending a single signal to a dedicated terminal. The LECA6 controls NPN or PNP servo motors.
Motor controller: Step motor (servo/24 VDC), Servo motor (24 VDC)
Compatible with series LES
Possible to set position, speed & force (64 points)
Screw mounting or DIN rail mounting
Series LECP6 controller has two available modes for the setting software and teaching box. In the easy mode, the operation can be started by only setting the speed, position, etc. Using the normal mode allows a further detailed setup. A few of the main functions of the LECP6 controller are actuator control, specified force operation, separated power supply, and returning the actuator to the home position by sending a single signal to a dedicated terminal. The LECP6 controls NPN or PNP step motors.
Motor controller: Step motor (servo/24 VDC), Servo motor (24 VDC)
Compatible with series LES
Possible to set position, speed & force (64 points)
Screw mounting or DIN rail mounting
