Thomson Linear Electrak AC Actuators A12-10B5-xxD
| GENERAL | |
| Product Family: | Electrak 5 Actuator |
| Brand: | Thomson |
| Available in: | North America |
 |
|
| PERFORMANCE | |
| Actuator Voltage: | 115 VAC @ 60Hz |
| Max Dynamic Load N (lbs): | 4500 (1000) 6672 (1500) See custom service |
| Max Static Load N (lbs): | 11120 (2500) |
| No Load Speed mm/sec (in/sec): | 28 (1.1) |
| Max Load Speed mm/sec (in/sec): | 25.4 (1) |
| Std Stroke Lengths mm (in): | 100(4), 200(8), 300(12), 460(18), 610(24) Custom lengths available |
| Max Rated Current amps: | 2.85 |
| Duty Cycle @ Max Load: | 25% (45 sec max ON time) |
| Rated@Ambient Temp °C (°F): | 25 (77) |
|
|
| MECHANICAL | |
| Screw Type: | Ball |
| Screw Lead mm (in): | 5.08 (0.2) |
| Gear Ratio: | 10:1 |
| Feedback Options: | Limit Switches (NA only) Potentiometer Manual Override |
| End Play mm (in): | 1.02 (.04) |
| Mounting: | Clevis (0-150° rotation optional - EU only) |
| Restraining Torque Nm (#-in): | 11.3 (100) |
| Weight kg (lbs): | < 8.44 (18.6) @ max length |
| Brake (Holding): | Integral Wrap-Spring |
| Brake (Dynamic): | No |
| Brake (Anti Coast): | Yes (pawl type) |
| Manual Override: | Yes, optional |
| Mid Stroke Protection: | Overload Clutch (Ball Detent) |
| End of Stroke Protection: | Overload Clutch (Ball Detent) |
| Motor Overload Protection: | Thermal switch (auto reset) |
|
|
| ENVIRONMENT | |
| IP Rating: | IP 45 |
| Temperature Range°C (°F): | -25 to 65 (-15 to 150) |
|
|
| CONNECTION | |
| Cable Length mm (in): | 600 (23) |
| Connectors: | Packard Electric 56 Series Male: 2984883 w/terminal 2962987 Female: 2973781 w/terminal 2962573 |
| Wire Size mm2 (AWG): | .823 (18) |
|
|
| CERTIFICATES | |
| CE: | Yes - in US optional |
| UL Recognized: | Yes |
| CSA: | Yes |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
