ML6674
Honeywell ML6674 a line voltage, 8Nm actuator provides Series 60 floating three-position control in low torque damper applications.
Floating, SPDT Actuator - 70 lb-in
Overview
Honeywell ML6674 a line voltage, 8Nm actuator provides Series 60 floating three-position control in low torque damper applications.
Features
- With minimum position set screw adjustment, cable and IP54 rating
- Models available with declutch.
Product Specifications
- Application
- HVAC
- Dimensions (in.)
- 5.55 in high x 3.39 in wide x 3.0 in deep
- Dimensions (mm)
- 141 mm high x 86 mm wide x 76 mm deep
- Includes
- 4074ENY Bag Assembly
- Weight (lb)
- 2.4 lb
- Weight (kg)
- 1.1 kg
- Materials
- Steel plate and Plenum rated plastic
- Mounting
- Direct Coupled
- Frequency
- 50 Hz; 60 Hz
- Customer Special
- Honeywell-Europe
- Electrical Connections
- Appliance cable
- Operating Humidity Range (% RH)
- 5 to 95% RH, non-condensing
- Supply Voltage
- 24 Vac ±20%
- Power Consumption
- Driving-- 3.9 VA
- Shipping and Storage Temperature Range (F)
- 20 F to 130 F
- Shipping and Storage Temperature Range (C)
- -18 C to +54 C
- Approvals, CE
- 89/336/ECC, 73/23/EEC
- Ambient Temperature Range (F)
- 20 F to 125 F
- Ambient Temperature Range (C)
- -18 C to +50 C
- Approvals, C-Tick
- N314
- Environmental, Electrical or Ingress Protection Rating
- NEMA 1; IP54
- Internal Auxiliary Switch
- 0
- Maximum Noise Rating
- Driving (dB(A) @ 1m)-- 45
- Stroke
- 90 degrees
- Shaft Dimensions (in.)
- 3/8 to 1/2 in. square or round
- Actuator Type
- Damper
- Control Signal
- Floating; SPDT; On/Off
- Fail Safe Mode
- Non-Spring Return
- Torque Rating (lb-in.)
- 70 lb-in.
- Torque Rating (Nm)
- 8 Nm
- Additional Torque Ratings (lb-in.)
- Maximum Stall-- 130 lb-in.
- Additional Torque Ratings (Nm)
- Maximum Stall-- 15 Nm
- External Auxiliary Switches Available
- Yes, 201052B
- Rotation to Open
- By wiring
- Rotational Stroke Adjustment
- Mechanically limited at 45 or 60 degrees in CW or CCW directions
- Timing, Nominal
- Driving @ 60 Hz (sec)-- 110 sec
- Shaft Adapter Type
- Aluminum Hub, two set screws
- Manual operation
- Declutch mechanism
- Shaft Dimensions (mm)
- 10 to 13 mm square/round
- Electrical Connections (in.)
- 39 in.
- Electrical Connections (mm)
- 1 m
|
|