SMC linear Basic Air Cylinder
Basic linear cylinders are used to provide straight-line, in/out linear movement for a variety of applications. Available as single acting (spring extend or spring return) and double acting styles with single rod or double rod configurations, non-rotating, and precision non-rotating models.
Body styles include crimped, round, or tie rod. Single acting cylinders develop thrust in one direction and have lower air consumption compared with the equivalent size of double acting cylinders. With a double acting air cylinder, air pressure may be alternately applied to provide force in both directions.
Series: CQ2-Z, NCM, NCJ2, NCG, NCA1, CJ2, CM2, CG1, MB, CS1, CS2, C85, C96
The NCG provides precision mounting, short overall length, and high speed. Rubber bumpers are standard and an optional adjustable air cushion is available. Nine mounting styles include basic body, foot, single clevis, front or rear flange, front or rear trunnion, nose mount, and double clevis. Bore sizes range from 3/4" to 2 1/2" and standard stroke lengths from 1" to 12". The NCG series is auto-switch capable. Non-rotating and double rod are standard options.
Non rotating, high speed/precision cylinder
Non rotating accuracy: ¹1° ( ø20, ø25), ¹0.8° (ø32), ¹0.5° (ø40- ø63)
8 mounting styles available
6 bore sizes available
Auto switch capable
NC(D)G, High Speed/Precision Cylinder, Double Acting, Single Rod w/Rod End Modifications
The NCG provides precision mounting, short overall length, and high speed. Rubber bumpers are standard and an optional adjustable air cushion is available. Nine mounting styles include basic body, foot, single clevis, front or rear flange, front or rear trunnion, nose mount, and double clevis. Bore sizes range from 3/4" to 2 1/2" and standard stroke lengths from 1" to 12". The NCG series is auto-switch capable. Non-rotating and double rod are standard options.
The NCG provides precision mounting, short overall length, and high speed. Rubber bumpers are standard and an optional adjustable air cushion is available. Nine mounting styles include basic body, foot, single clevis, front or rear flange, front or rear trunnion, nose mount, and double clevis. Bore sizes range from 3/4" to 2 1/2" and standard stroke lengths from 1" to 12". The NCG series is auto-switch capable. Non-rotating and double rod are standard options.
Double rod high precision cylinder
6 bore sizes available: 20mm ~ 63mm
Air cushion available
Mounting styles: basic, axial foot, flange, trunnion
Auto switch capab
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring return or spring extend models. The NCM is auto-switch capable without any change in cylinder dimension. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Corrosion resistant 304 stainless steel exterior components
6 bore sizes
Built-in rod wiper protects interior from contaminants
Auto switch capable
Dimensionally interchangeable with standard NCM series
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring return or spring extend models. The NCM is auto-switch capable without any change in cylinder dimension. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Corrosion resistant 304 stainless steel exterior components
6 bore sizes
Built-in rod wiper protects interior from contaminants
Auto switch capable
Dimensionally interchangeable with standard NCM series
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring return or spring extend models. The NCM is auto-switch capable without any change in cylinder dimension. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Double acting single rod
Bore sizes (inch): 7/16, 9/16, 3/4, 7/8, 1 1/16,1 1/4, 1 1/2, 2
Mounts: nose, rear, end, rod, block
Variety of switches and lead wire lengths
Optional Rod Boot
NC(D)M, Stainless Steel Cylinder, Double Acting, Single Rod w/Rod End Modifications
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring return or spring extend models. The NCM is auto-switch capable without any change in cylinder dimension. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Available in 4 bore sizes
Floating cushion seal
Cushion adjustment is recessed so it doesn't protrude
Piston wear ring to extend life
Auto switch capable
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring return or spring extend models. The NCM is auto-switch capable without any change in cylinder dimension. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Single acting single rod, spring return or spring extend
Bore sizes (inch): 3/4, 7/8, 1 1/16, , 1 1/4, 1 1/2
Maximum stroke: up to 6" as standard
Available with auto switches
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring return or spring extend models. The NCM is auto-switch capable without any change in cylinder dimension. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Non rotating, air cylinder
Stainless steel body
Bore sizes-3/4" to 1 1/2"
3 mountings types available
Auto switch capable
SMC cylinder Basic linear cylinders NCM NC(D)MW, Stainless Steel Cylinder, Double Acting, Double Rod
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring return or spring extend models. The NCM is auto-switch capable without any change in cylinder dimension. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Double rod type air cylinder
Stainless steel rod
Bore sizes-3/4" to 2"
3 mounting types available
Auto switch capable
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring return or spring extend models. The NCM is auto-switch capable without any change in cylinder dimension. Bore sizes range from 7/16" to 2" and standard strokes from 1/2" to 12".
Single acting single rod, spring return or spring extend
Block mount
Bore sizes: 075 (3/4"), 106 (1 1/16"), 150 (1 1/2")
Strokes (inch): 1/2, 1, 1 1/2, 2, 3, 4, 6
NCM, Accessory, Pivot Bracket
Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 4 mounting styles (front nose, double end, rear pivot, and block mount) as well as double rod and spring return or spring extend models. The NCM is auto-switch capable without any change in cylinder dim
With English threads and NPT ports, the NCQ2 series is a versatile cylinder well suited to a variety of applications. The short overall length, of this space saving cylinder helps to make various jigs and equipment more compact. Snap rings are used to secure the head cover, making replacement of seals possible. For maximum flexibility, you can select double-rod end, non-rotating, and single acting. With six mounting options, 10 bore sizes from 12mm to 100mm, strokes up to 300mm, and built-in auto switches, the NCQ2 cylinder can be configured to match your needs. Other options include clean room, copper free, air/oil, built-in fittings, and rubber bumper. "In the U.S., the NCQ2 can be manufactured until parts are depleted. See the new and improved NCQ2-Z."
Bore sizes in mm: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100
Strokes from 5mm to 100mm depending upon bore size
Mounts: through hole, both ends tapped, foot, front & rear flange, double clevis, rear boss
Variety of switches and a variety of lead wire lengths
With English threads and NPT ports, the NCQ2 series is a versatile cylinder well suited to a variety of applications. The short overall length, of this space saving cylinder helps to make various jigs and equipment more compact. Snap rings are used to secure the head cover, making replacement of seals possible. For maximum flexibility, you can select double-rod end, non-rotating, and single acting. With six mounting options, 10 bore sizes from 12mm to 100mm, strokes up to 300mm, and built-in auto switches, the NCQ2 cylinder can be configured to match your needs. Other options include clean room, copper free, air/oil, built-in fittings, and rubber bumper. "In the U.S., the NCQ2 can be manufactured until parts are depleted. See the new and improved NCQ2-Z."
Large bore sizes 125mm, 140mm, & 160mm
Strokes from 10mm through 300mm depending upon bore size
Mounts: through hole only
Variety of switches and a variety of lead wire lengths
With English threads and NPT ports, the NCQ2 series is a versatile cylinder well suited to a variety of applications. The short overall length, of this space saving cylinder helps to make various jigs and equipment more compact. Snap rings are used to secure the head cover, making replacement of seals possible. For maximum flexibility, you can select double-rod end, non-rotating, and single acting. With six mounting options, 10 bore sizes from 12mm to 100mm, strokes up to 300mm, and built-in auto switches, the NCQ2 cylinder can be configured to match your needs. Other options include clean room, copper free, air/oil, built-in fittings, and rubber bumper. "In the U.S., the NCQ2 can be manufactured until parts are depleted. See the new and improved NCQ2-Z."
Single acting spring return, or single acting spring extend
Bore sizes in mm: 12, 16, 20, 25, 32, 40, 50
Strokes 5mm, 10mm, & 20mm depending on bore size
Mounts: through hole, both ends tapped, foot, front & rear flange, double clevis, rear boss
Variety of switches and a variety of lead wire lengths
With English threads and NPT ports, the NCQ2 series is a versatile cylinder well suited to a variety of applications. The short overall length, of this space saving cylinder helps to make various jigs and equipment more compact. Snap rings are used to secure the head cover, making replacement of seals possible. For maximum flexibility, you can select double-rod end, non-rotating, and single acting. With six mounting options, 10 bore sizes from 12mm to 100mm, strokes up to 300mm, and built-in auto switches, the NCQ2 cylinder can be configured to match your needs. Other options include clean room, copper free, air/oil, built-in fittings, and rubber bumper. "In the U.S., the NCQ2 can be manufactured until parts are depleted. See the new and improved NCQ2-Z."
Non-rotating rod
Bore sizes in mm: 12, 16, 20, 25, 32, 40, 50, 63
Strokes from 5mm to 100mm depending upon bore size
Mounts: through hole, both ends tapped, foot, front & rear flange, double clevis, rear boss
Variety of switches and a variety of lead wire lengths
With English threads and NPT ports, the NCQ2 series is a versatile cylinder well suited to a variety of applications. The short overall length, of this space saving cylinder helps to make various jigs and equipment more compact. Snap rings are used to secure the head cover, making replacement of seals possible. For maximum flexibility, you can select double-rod end, non-rotating, and single acting. With six mounting options, 10 bore sizes from 12mm to 100mm, strokes up to 300mm, and built-in auto switches, the NCQ2 cylinder can be configured to match your needs. Other options include clean room, copper free, air/oil, built-in fittings, and rubber bumper. "In the U.S., the NCQ2 can be manufactured until parts are depleted. See the new and improved NCQ2-Z."
Compact, double acting, double rod, non-rotating
Bore size (mm): 12, 16, 20, 25, 32, 40, 50, 63
Standard strokes (mm): 5 to 50 depending on bore size
Auto switch capable
Variety of lead wires or prewired connectors
