Bimba Cylinder
System configuration and setup is easily completed using software. The SPCS-2 operates with either a 0-10 VDC or 4-20 mA analog command signal, providing closed loop pneumatic proportional control for all Bimba position feedback actuators, including the PFCN, PFCNL, PFCL, PTF and Ultran rodless cylinders with external transducers.
Compact Design
Operating Pressure: 0-150 psig (0-10 bar)
Flow: Up to 46 SCFM @ 150 psig (820 SLPM @ 6 bar)
Positioning accuracy up to 1% of full stroke
Maximum Payloads: 450 lbs horizontally, 135 lbs vertically
Recommended for use with Bimba PFC cylinders w/low friction seals (L option)
Mead's single acting air clamps provide gripping power on the out stroke and spring retraction. They are ideal for use in drill fixtures, bending, forming, crimping, and pressing operations. Because 3-way valves may be used, hook-ups are quick and easy. Some air clamps are supplied with an adjustable front head so the stroke may be adjusted by as much as one inch.
Pressure: Air to 150 PSI
Temperature: -40° to +125°
Seal Material: Custom molded one piece neoprene cups
Body: Aluminum on adj. models, cast iron on H-12/H-283, cast alunimun on others
Rod: Nitrotec plated steel on 1 inch bore models, ground and polished on all others
Filteration: 40µ minimum
Small bore NFPA cylinders are designed to generate high performance in most applications. They incorporate a tie-rod construction that allow for flexure. Small bore cylinders are available with double rods, high temperature seals, and for hydraulic use. Some of our small bore cylinders are available with cushions and pneumatic end of stroke sensors.
Bore sizes: 3/4", 1-1/8"
1-1/8" bore cylinder available with pneumatic end-of-stroke sensors (Inter-Pilots™)
1-1/8" bore cylinder available with cushions for shock absorbtion
Available as double rod cylinders
Six different mounts to choose from on the 1-1/8" bore cylinder
Cylinders are made to order, common options typically do not delay shipping
Space Saver® cylinders provide the power and stroke of standard cylinders in less than half the space. They are ideal for use in machinery where space and weight are at a premium, and cost up to 50% less than standard models. They are built to last using oil impregnated sintered bronze rod bearings and hard coated cylinder bores that eliminate scoring.
Bore sizes: 3/4", 1-1/8", 1-1/2", 2", 2-1/2", 3", 4"
Uniform base thickness makes mounting easy regardless of stroke
Cylinders are ideal for use on drill fixtures and other automated tooling
Valve hookup is made easy because the top cylinder port swivels 360°
Pressure: 0-150 PSI (air only)
Temperature: -40°F to 250°F (to 400°F with Viton)
Square Flat-I® series cylinders are a convenient alternative for horizontal and side mounting, with provisions for both bottom flush, or face mounting. This design also minimizes the centerline distance when cylinders are mounted side by side. With a variety of stroke lengths and options available, you can customize these cylinders to your application needs.
Bore sizes: 3/4", 1-1/16", 1-1/2", 2", 2-1/2", 3", 4"
304 stainless steel body prevents corrosion
Standard oil impregnated bronze rod bushing
Stainless piston rod
Precision machined anodized aluminum heads
Maximum Pressure: 150 PSI (air only)
Square Flat-II® non-rotating, double acting cylinders provide the answer to applications where rotation cannot be tolerated. Non-rotation is achieved with dual piston rods and a rod end block that insures the rods work in tandem. This design eliminates the need for any type of external alignment devices and the square end caps allow for bottom flush or face mounting.
Bore sizes: 3/4", 1-1/16", 1-1/2", 2"
304 stainless steel body prevents corrosion
303 stainless steel tie-rods
Stainless piston rod
Precision machined anodized aluminum heads
Maximum Pressure: 200 PSI (air only)
TRD's NFPA heavy duty stainless steel cylinder is ideal for applications subjected to chemicals and corrosive environments. Options include an FDA approved lubricant and solid Delrin® rod bushing, which is also FDA approved. The solid stainless steel piston provides maximum corrosion resistance.
Bore sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6", 8"
Piston rods are hard chrome plated, ground and polished stainless steel
Maximum Operating Presssure: 250 PSI air, 400 PSI hydraulic non-shock (TH option)
316 stainless steel is optional; please allow additional time due to material availability
Stainless steel multi-stage and triple rod cylinders are available
Permanent lubrication design provides outstanding service life. Click here to learn more!
TRD stainless steel multi-stage cylinders can be used to multiply the force on either the extend (SS-MSE) or retract (SS-MSR) stroke. Both models use only one piston on the return stroke, saving air volume and operating costs. The cylinders can be purchased in 2, 3, or 4 stage models.
Bore sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6"
Rated for 125 PSI Air, or Hydraulic (non-shock)
Eliminates the need for high pressure systems
Bore size vs. output force saves space
Double rod end models available
Ships in 2-3 days
TA series NFPA cylinders have a self alignment feature, which is a rod bushing designed to float 0.002", improving bearing surface alignment. This provides a minimum of 25% longer life than "fixed" rod bushing design. It also reduces breakaway and running friction, which improves overall actuation responsiveness. Cylinders can be customized to fit any application.
Bore sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6", 8", 10", 12"
Precision machined components from high alloy aluminum
Maximum Operating Pressure: 250 PSI air, 400 PSI hydraulic non-shock ("TH" option)
Permanent lubrication design provides outstanding service life. Click here to learn more!
Cylinders are made to order, adding standard options typically won’t affect delivery times
Standard, oversized, and many special rod sizes available
The stopper cylinder is a modified EF-I cylinder designed specifically for conveyor stopping applications. It features a heavy-duty mounting plate, and the cylinder's rod/bearing design was developed specifically to withstand side impact loading. It is available in two double acting models, including a double acting failsafe spring extend design.
Standard U.S. customary (inch) threads for ports, mounting, and rods
Stroke lengths available: 15, 20, 25mm
Maximum Operating Pressure: 140 PSI
Operating Temperature: 15° to 160°F (15° - 225° with -V option)
Lubrication: PTFE grease
Cylinder Body: Aluminum, hard coat with PTFE
TRD's 2-stage telescoping cylinders feature standard NFPA aluminum body construction, with a solid aluminum piston with bumper piston seals and a PTFE wear band. The wear bands provide additional bearing support on the tube. These cylinders are designed to support the unit's weight only, and are not intended for "side load" applications.
Bore sizes: 3/4", 1-1/2”, and 2-1/2” effective bores
Strokes up to 60 inches
Space savings design
Rated for non-lube service
Standard NFPA mounting
Internal bumpers at each stage
TD cylinders feature bumper piston seals, reducing machine vibration and allowing higher velocities to be achieved while reducing noise. Standard fixed cushions provide tamper free operation and guarantee cushion function at the end of each full stroke. A PTFE piston wear band providing low friction and long life operation in demanding applications is also standard.
Bore sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6", 8"
The TD Tough-Duty series can be further customized by adding additional options
Standard and oversized rods available
Same features as TA series with addition of bumper piston seals and fixed cushions
Adjustable cushions optional for precise adjustments and maximum performance
Permanent lubrication design provides outstanding service life. Click here to learn more!
TRA series triple rod cylinders are built for heavy duty applications, and have heavy duty rod bearings that maximize load handling abilities. The triple piston rod is designed to provide a non-rotating feature and a tool plate for ease of use. Double rod end models with three rods and two tooling plates and double rod end with single rods and one tooling plate are available.
Bore sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4", 5", 6", 8"
Heavy-duty design provides high forces in a non-rotating cylinder
Available in stainless steel and multi-stage designs
Can be used as a drop in replacement for old TR series cylinders
Versatile design used in pick and place applications or steel rule punch applications
Permanent lubrication design provides outstanding service life. Click here to learn more!
The Bimba Twin Bore cylinder is a small cross-section, double bore cylinder that provides highly accurate linear motion. These cylinders incorporate extra long piston rod bearings, resulting in high radial load capacity. Twin bore cylinders are symmetric and can be mounted from either side to allow convenient port access.
Standard metric threads for ports, mounting, and rods (Specify "E" option for inch threads)
Bore sizes: 6mm, 8mm, 12mm, 16mm, 20mm, 25mm, 32mm
Bumpers standard on all models
Options available for side mounting holes and shock absorbers
Single and double end rod units are available
Delrin® and ball bushing styles available
The Bimba Twin Bore cylinder is a small cross-section, double bore cylinder that provides highly accurate linear motion. These cylinders incorporate extra long piston rod bearings, resulting in high radial load capacity. Twin bore cylinders are symmetric and can be mounted from either side to allow convenient port access.
Standard metric threads for ports, mounting, and rods (Specify "E" option for inch threads)
Bore sizes: 6mm, 8mm, 12mm, 16mm, 20mm, 25mm, 32mm
Bumpers standard on all models
Options available for side mounting holes and shock absorbers
Single and double end rod units are available
Delrin® and ball bushing styles available
