SMC Electric Cylinders
Electric actuators from SMC are designed with a focus on easy setup and operation. Key features, including high precision positioning and repeatability characterize the SMC series of electric cylinder products. With no need for compressed air, electric actuators provide movements beyond the capabilities of a pneumatic actuator. And now, a new series of electric actuators, the LE series, adds simplicity of use to other benefits of the electric actuator. Select the "Easy Mode" setting option on your LE series electric actuator, and within minutes of taking it out of the box, your selected electric actuator can be operating efficiently and effectively, The LE line of electric actuators are available in a variety of types. Styles available include slider electric actuators, rod type electric actuators, electric slide table actuators, electric rotary actuators, and electric grippers. Accessories include electric actuator controllers, and gateways.
Series LECPA pulse input driver, combined with a 24 volt step motor, permits control of position, speed, acceleration and deceleration using pulse signals. The LECPA is a step motor driver compatible with a variety of SMC's electric actuators including the LEY, LEF, LES, LER and LEP series.
Step motor driver
Pulse input type
For step motor
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LEFS (slider type, ball screw drive) and LEFB (slider type, belt drive)
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LEHF
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LEHS
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LEHZ
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LEHZJ
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LEL (guide rod slider, belt drive)
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LEP
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LER
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LES
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LESH
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LEY, LEY-X5
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
LECPMJ is a CC-Link direct input type step motor controller, ver. 1.10 compliant. There are 3 types of operation modes available: single numerical data instructions, half numerical data instructions, and full numerical data instructions. Position and speed can be monitored by the PLC, and except in the case of the single numerical data instruction mode, step data can be edited from the PLC.
Applicable to series LEYG
CC-Link Ver. 1.10 compliant
3 types of operation mode available
Position and speed can be monitored by the PLC
Step data can be edited from the PLC
SMC's LECS series is an AC servo motor controller, available in incremental or absolute encoder compatible types. The LECSA is a pulse input, positioning type for an incremental encoder, and the LECSB is a pulse input type for an absolute encoder. Also available in the series are the LECSC, CC-Link direct input type for an absolute encoder, and the LECSS, SSCNETlll type for an absolute encoder.
AC servo motor controller
2 controller types: absolute encoder, incremental encoder
Power supply voltage: 100 to 120VAC or 200 to 230VAC
Pulse type, CC-Link direct input type, or SSCNETlll type
The LEF series slider type electric actuator features a low profile height of 46mm (LEF16). The actuator's main body can be mounted without removing any exterior components, such as the cover, making installation easy. The standard equipped seal band covers the guide, ball screw and belt, preventing grease and external foreign matter from splashing and entering the LEF. There are 2 types of drivers available, ball screw or timing belt. Available motors include servo motor ball screw drive or step motor belt drive. When the LEF is ordered with the controller, initial data of the actuator is preset in the controller allowing start-up in a short time with the "easy mode".
Body size: 16, 25, 32
Belt drive
Applicable stroke range: 300, 500, 600, 700, 800, 900, 1000, 1200, 1500, 1800, 2000
2 types of motors: servo motor ball screw drive or step motor belt drive
Controller mounting: screw or DIN rail type
