Camozzi Stainless steel cylinders

Construction with tie-rods Operation single-acting or double-acting Materials - end blocks, barrel and rod in stainless steel AISI 316 - seals in NBR - plastic guiding element, NSF H1-certified lubricant Mountings several types of cylinders mounting brackets available Stroke 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (no load) Media Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 90M2A125A0050 Cylinders Series 90 Stainless steel tie-rods cylinders double-acting 50 125 90M2A125A0075 Cylinders Series 90 Stainless steel tie-rods cylinders double-acting 75 125 90M2A125A0080 Cylinders Series 90 Stainless steel tie-rods cylinders double-acti

Construction with tie-rods Operation single-acting or double-acting Materials - end blocks, barrel and rod in stainless steel AISI 316 - seals in NBR - plastic guiding element, NSF H1-certified lubricant Mountings several types of cylinders mounting brackets available Stroke 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (no load) Media Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 90M6A032A0025 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 25 32 90M6A032A0050 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 50 32 90M6A032A0075 Cylinders Series 90 -

Construction with tie-rods Operation single-acting or double-acting Materials - end blocks, barrel and rod in stainless steel AISI 316 - seals in NBR - plastic guiding element, NSF H1-certified lubricant Mountings several types of cylinders mounting brackets available Stroke 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (no load) Media Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 90M6A040A0025 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 25 40 90M6A040A0050 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 50 40 90M6A040A0075 Cylinders Series 90 -

Construction with tie-rods Operation single-acting or double-acting Materials - end blocks, barrel and rod in stainless steel AISI 316 - seals in NBR - plastic guiding element, NSF H1-certified lubricant Mountings several types of cylinders mounting brackets available Stroke 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (no load) Media Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 90M6A050A0025 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 25 50 90M6A050A0050 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 50 50 90M6A050A0075 Cylinders Series 90 -

Construction with tie-rods Operation single-acting or double-acting Materials - end blocks, barrel and rod in stainless steel AISI 316 - seals in NBR - plastic guiding element, NSF H1-certified lubricant Mountings several types of cylinders mounting brackets available Stroke 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (no load) Media Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 90M6A063A0025 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 25 63 90M6A063A0050 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 50 63 90M6A063A0075 Cylinders Series 90 -

Construction with tie-rods Operation single-acting or double-acting Materials - end blocks, barrel and rod in stainless steel AISI 316 - seals in NBR - plastic guiding element, NSF H1-certified lubricant Mountings several types of cylinders mounting brackets available Stroke 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (no load) Media Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 90M6A080A0025 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 25 80 90M6A080A0050 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 50 80 90M6A080A0075 Cylinders Series 90 -

Construction with tie-rods Operation single-acting or double-acting Materials - end blocks, barrel and rod in stainless steel AISI 316 - seals in NBR - plastic guiding element, NSF H1-certified lubricant Mountings several types of cylinders mounting brackets available Stroke 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (no load) Media Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 90M6A100A0025 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 25 100 90M6A100A0050 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 50 100 90M6A100A0075 Cylinders Series 90

Construction with tie-rods Operation single-acting or double-acting Materials - end blocks, barrel and rod in stainless steel AISI 316 - seals in NBR - plastic guiding element, NSF H1-certified lubricant Mountings several types of cylinders mounting brackets available Stroke 25 ÷ 800 mm Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (no load) Media Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 90M6A125A0050 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 50 125 90M6A125A0075 Cylinders Series 90 - through-rod Stainless steel tie-rods cylinders double-acting, through-rod 75 125 90M6A125A0080 Cylinders Series 90

Construction end blocks secured to the tube Operation single-acting and double-acting Materials end blocks and rod in stainless steel AISI 316, seals in NBR, plastic guiding element, NSF H1-certified lubricant Series 94: tube in stainless steel AISI 304 Series 95: tube in stainless steel AISI 316 Mounting several types of cylinders clamps available Strokes min - max 10 ÷ 500 mm Operating temperature 0° - 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 94N1A16A010 Cylinders Series 94 and 95 Stainless steel minicylinders single-acting 10 16 94N1A16A025 Cylinders Series 94 and 95 Stainless steel minicylinders single-acting 25 16 9

Construction end blocks secured to the tube Operation single-acting and double-acting Materials end blocks and rod in stainless steel AISI 316, seals in NBR, plastic guiding element, NSF H1-certified lubricant Series 94: tube in stainless steel AISI 304 Series 95: tube in stainless steel AISI 316 Mounting several types of cylinders clamps available Strokes min - max 10 ÷ 500 mm Operating temperature 0° - 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 94N1A20A010 Cylinders Series 94 and 95 Stainless steel minicylinders single-acting 10 20 94N1A20A025 Cylinders Series 94 and 95 Stainless steel minicylinders single-acting 25 20 9

Construction end blocks secured to the tube Operation single-acting and double-acting Materials end blocks and rod in stainless steel AISI 316, seals in NBR, plastic guiding element, NSF H1-certified lubricant Series 94: tube in stainless steel AISI 304 Series 95: tube in stainless steel AISI 316 Mounting several types of cylinders clamps available Strokes min - max 10 ÷ 500 mm Operating temperature 0° - 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 94N3A16A010 Cylinders Series 94 and 95 - through-rod Stainless steel minicylinders double-acting, through-rod 10 16 94N3A16A025 Cylinders Series 94 and 95 - through-rod Stainless steel minicylinders

Construction end blocks secured to the tube Operation single-acting and double-acting Materials end blocks and rod in stainless steel AISI 316, seals in NBR, plastic guiding element, NSF H1-certified lubricant Series 94: tube in stainless steel AISI 304 Series 95: tube in stainless steel AISI 316 Mounting several types of cylinders clamps available Strokes min - max 10 ÷ 500 mm Operating temperature 0° - 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 94N3A20A010 Cylinders Series 94 and 95 - through-rod Stainless steel minicylinders double-acting, through-rod 10 20 94N3A20A025 Cylinders Series 94 and 95 - through-rod Stainless steel minicylinders

Construction end blocks secured to the tube Operation single-acting and double-acting Materials end blocks and rod in stainless steel AISI 316, seals in NBR, plastic guiding element, NSF H1-certified lubricant Series 94: tube in stainless steel AISI 304 Series 95: tube in stainless steel AISI 316 Mounting several types of cylinders clamps available Strokes min - max 10 ÷ 500 mm Operating temperature 0° - 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 94N1A25A010 Cylinders Series 94 and 95 Stainless steel minicylinders single-acting 10 25 94N1A25A025 Cylinders Series 94 and 95 Stainless steel minicylinders single-acting 25 25 9

Construction end blocks secured to the tube Operation single-acting and double-acting Materials end blocks and rod in stainless steel AISI 316, seals in NBR, plastic guiding element, NSF H1-certified lubricant Series 94: tube in stainless steel AISI 304 Series 95: tube in stainless steel AISI 316 Mounting several types of cylinders clamps available Strokes min - max 10 ÷ 500 mm Operating temperature 0° - 80°C (with dry air -20°C) Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (without load) Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title Type Operation Stroke (multi-position) Diameter (mm) 94N3A25A010 Cylinders Series 94 and 95 - through-rod Stainless steel minicylinders double-acting, through-rod 10 25 94N3A25A025 Cylinders Series 94 and 95 - through-rod Stainless steel minicylinders