SMC linear Basic Air Cylinder

Series CM2 stainless steel cylinders are compact, lightweight and offer high performance. Improved piston seal and rod seal greatly improve the unit's life. Rubber bumpers are standard. The CM2 series offers a variety of mounting options and is auto switch capable. Minimum operating pressure 0.01 to 0.03 MPa The smooth operation can be maintained even at low speeds (5mm/sec) Bi-directional low-friction allows smooth operation during cylinder extend and retract Smooth operation with less sticking and slipping Pressure can be controlled regardless of its direction

SMC has redesigned the CM2 compact stainless steel cylinder to allow the selection of a female rod end as standard.  The CM2 series also offers a variety of mounting options and is auto switch capable with easy fine adjustment.  Bore sizes: 20, 25, 32, 40 Standard stroke: 25, 50, 75, 10, 125, 150, 200, 250 Easy fine adjustment of auto switch position Female rod end available as standard

SMC has redesigned the CM2 compact stainless steel cylinder to allow the selection of a female rod end as standard.  The CM2 series also offers a variety of mounting options and is auto switch capable with easy fine adjustment.  Female rod end available as standard. Bore sizes:  20, 25, 32, 40 Easy fine adjustment of auto switch position Total length shortened with boss-cut type

SMC has redesigned the CM2 compact stainless steel cylinder to allow the selection of a female rod end as standard.  The CM2 series also offers a variety of mounting options and is auto switch capable with easy fine adjustment.  Non-rotating rod: double acting single rod Bore sizes: 20, 25, 32, & 40 (mm) Strokes from 25mm through 300mm Mounts: basic, foot, front & rear flange, single & double clevis, rod & head trunnion Variety of switches and a variety of lead wire lengths

SMC has redesigned the CM2 compact stainless steel cylinder to allow the selection of a female rod end as standard.  The CM2 series also offers a variety of mounting options and is auto switch capable with easy fine adjustment.  Non-rotating, double acting, double rod air cylinder Bore sizes (mm): ø20, ø25, ø32, ø40 Rubber bumper or air cushion Compact and light weight Auto switch capable

SMC has redesigned the CM2 compact stainless steel cylinder to allow the selection of a female rod end as standard.  The CM2 series also offers a variety of mounting options and is auto switch capable with easy fine adjustment.  Direct mount: double acting single rod Bore sizes: 20, 25, 32, 40 (mm) Strokes from 25mm to 300mm Mounts: direct to bottom or front Variety of switches and lead wire lengths

SMC has redesigned the CM2 compact stainless steel cylinder to allow the selection of a female rod end as standard.  The CM2 series also offers a variety of mounting options and is auto switch capable with easy fine adjustment.  Direct mount: double acting single rod Bore sizes: 20, 25, 32, 40 (mm) Strokes from 25mm to 300mm Mounts: direct to bottom or front Variety of switches and lead wire lengths CM-E***B, CM2 Series, Pivot Bracket for Integrated Clevis SMC has redesigned the CM2 compact stainless steel cylinder to allow the selection of a female rod end as standard.  The CM2 series also offers a variety of mounting options and is auto switch capable with easy fine adjustment.  Pivot bracket for integrated clevis Applicable series: CM2 Applicable bore sizes (mm): 20, 25, 32, 40 Material: rolled steel   CM2/CM2-Z Accessory, Knuckle Joints SMC has redesigned the CM2 compact stainless steel cylinder to allow the selection of a female rod end as standard.  The CM2 series also offers a variety of mounting options and is auto switch capable with easy fine adjustment.  Single and double

SMC has redesigned the CM2 compact stainless steel cylinder to allow the selection of a female rod end as standard.  The CM2 series also offers a variety of mounting options and is auto switch capable with easy fine adjustment.  Female rod end available as standard. Bore sizes: 20, 25, 32, 40 Easy fine adjustment of auto switch position Total length shortened with boss-cut type

Series CQ2 compact cylinders provide a space-saving design and exceptional service life. They feature front snap ring design for easy access to internal parts. Available in single and double rod models, male and female thread design, double acting, spring return and spring extend. Choose from 13 bore sizes up to 200mm. Optional reed/solid state switches may be used. The aluminum extruded bodies, featuring through-hole and threaded body mounting, provide versatility and reliability in any design application. "In the U.S., the CQ2 can be manufactured until parts are depleted.  See the new and improved CQ2-Z." Compact end lock cylinder Bore sizes: 20mm to 100mm 6 mounting types available Double acting Auto switch capable

Series CQ2 compact cylinders provide a space-saving design and exceptional service life. They feature front snap ring design for easy access to internal parts. Available in single and double rod models, male and female thread design, double acting, spring return and spring extend. Choose from 13 bore sizes up to 200mm. Optional reed/solid state switches may be used. The aluminum extruded bodies, featuring through-hole and threaded body mounting, provide versatility and reliability in any design application. "In the U.S., the CQ2 can be manufactured until parts are depleted.  See the new and improved CQ2-Z." Double acting, single rod, water resistant Compact, space-saving Bore size (mm): 20, 25, 32, 40, 50, 63, 80, 100 Standard stroke (mm): 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 75, 100 Auto switch capable

Series CQ2 compact cylinders provide a space-saving design and exceptional service life. They feature front snap ring design for easy access to internal parts. Available in single and double rod models, male and female thread design, double acting, spring return and spring extend. Choose from 13 bore sizes up to 200mm. Optional reed/solid state switches may be used. The aluminum extruded bodies, featuring through-hole and threaded body mounting, provide versatility and reliability in any design application. "In the U.S., the CQ2 can be manufactured until parts are depleted.  See the new and improved CQ2-Z." Anti-lateral load Bore sizes: 32, 40, 50, 63, 80, 100 (mm) Strokes from 10mm through 100mm depending upon bore size Mounts: through hole, both ends tapped, foot, front or rear flanges, double clevis Variety of switches and a variety of lead wire lengths

Series CQ2 compact cylinders provide a space-saving design and exceptional service life. They feature front snap ring design for easy access to internal parts. Available in single and double rod models, male and female thread design, double acting, spring return and spring extend. Choose from 13 bore sizes up to 200mm. Optional reed/solid state switches may be used. The aluminum extruded bodies, featuring through-hole and threaded body mounting, provide versatility and reliability in any design application. "In the U.S., the CQ2 can be manufactured until parts are depleted.  See the new and improved CQ2-Z." Large bore sizes 125mm, 140mm & 160mm Strokes from 10mm through 300mm depending upon bore size Mounts: through hole only Variety of switches and a variety of lead wire lengths

Series CQ2 compact cylinders provide a space-saving design and exceptional service life. They feature front snap ring design for easy access to internal parts. Available in single and double rod models, male and female thread design, double acting, spring return and spring extend. Choose from 13 bore sizes up to 200mm. Optional reed/solid state switches may be used. The aluminum extruded bodies, featuring through-hole and threaded body mounting, provide versatility and reliability in any design application. "In the U.S., the CQ2 can be manufactured until parts are depleted.  See the new and improved CQ2-Z." Large bore sizes 180mm & 200mm Strokes from 10mm through 175mm depending upon bore size Mounts: through hole only Variety of switches and a variety of lead wire lengths

Series CQ2 compact cylinders provide a space-saving design and exceptional service life. They feature front snap ring design for easy access to internal parts. Available in single and double rod models, male and female thread design, double acting, spring return and spring extend. Choose from 13 bore sizes up to 200mm. Optional reed/solid state switches may be used. The aluminum extruded bodies, featuring through-hole and threaded body mounting, provide versatility and reliability in any design application. "In the U.S., the CQ2 can be manufactured until parts are depleted.  See the new and improved CQ2-Z." Bore sizes in mm: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 Strokes from 5mm to 50mm depending upon bore size Mounts: through hole, both ends tapped, foot, rod flange, double clevis Screw in piping or one-touch fittings XC8 (adjustable stroke, extension type) or XC9 (adjustable stroke, retraction type)

Series CQ2 compact cylinders provide a space-saving design and exceptional service life. They feature front snap ring design for easy access to internal parts. Available in single and double rod models, male and female thread design, double acting, spring return and spring extend. Choose from 13 bore sizes up to 200mm. Optional reed/solid state switches may be used. The aluminum extruded bodies, featuring through-hole and threaded body mounting, provide versatility and reliability in any design application. "In the U.S., the CQ2 can be manufactured until parts are depleted.  See the new and improved CQ2-Z." Single acting spring return, or single acting spring extend Bore sizes in mm: 12, 16, 20, 25, 32, 40, 50 Strokes 5mm, 10mm, & 20mm depending on bore size Mounts: through hole, both ends tapped, foot, front & rear flange, double clevis, rear boss Screw in piping or one-touch fittings Variety of switches and a variety of lead wire lengths