Honeywell Damper Actuators

MS4209F Honeywell MS4209F 80 lb-in. (9Nm) torque, spring return, direct-coupled, 120 Vac, CW actuator accepts two-position SPST control with an integral junction box and on/off signal from a SPST controller. Reliably operates in smoke control systems requiring UL555S ratings up to 350F. Honeywell fast-acting, spring-return, two-position 80 lb-in., 9 Nm, actuator   Overview Honeywell MS4209F 80 lb-in. (9Nm) torque, spring return, direct-coupled, 120 Vac, CW actuator accepts two-position SPST control with an integral junction box and on/off signal from a SPST controller. Reliably operates in smoke control systems requiring UL555S ratings up to 350F. Features   Integral spring return ensures return torque level Fifteen-second spring return timing No special cycling required and no audible noise during long-term holding Models available for 24, 120 and 230 Vac Ninety-five degree angle of rotation for tight damper closure Holds rated torque at reduced power level Die-cast aluminum housing design allows flush mounting to damper and eliminates need for limit switches to reduce power consumption Integral junction box with three condu

MS4604 The Honeywell MS4604 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control).   MS4604F1010/U Fast-acting, two-position actuator with 30 lb-in., spring return MS4604F1210/U Fast-acting, two-position actuator with 30 lb-in., 2 aux. switches, spring return Overview The Honeywell MS4604 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation. Features   30 lb-in. (3.4 N•m) or 80 lb-in. (5.9 N•m) minimum driving torque at 350 F (176 C). Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation. Integral spring return ensures level of return torque. Fifteen-second spring return timing. No special cycling required during long-term holding. No audible noise during holding. Patent pending design eliminates need for limit switche

MS4709F1014/B Fast-acting, two-position actuator with 80 lb-in., CW spring return Overview Honeywell MS4709F 80 lb-in. (9Nm) torque, spring return, direct-coupled, 230 Vac, CW actuator accepts two-position (SPST) control with an integral junction box. Reliably operates in smoke control systems requiring UL555S ratings up to 350F. Features   Integral spring return ensures return torque level Fifteen-second spring return timing No special cycling required and no audible noise during long-term holding Models available for 24, 120 and 230 Vac Ninety-five degree angle of rotation for tight damper closure Holds rated torque at reduced power level Actuator holds rated torque at reduced power level Die-cast aluminum housing design allows flush mounting to damper Integral junction box with three conduit openings eliminates separate wiring box   Product Specifications Application Fire and Smoke Dimensions (in.) 7.5 in high x 5.13 in wide x 3.32 in deep Dimensions (mm) 192 mm high x 129 mm wide x 84 mm deep Weight (lb) 6 lb Weight (kg) 2.72 kg Materials Aluminum housing Comments

MS7405 Honeywell MS7405 44 lb-in. (5Nm), spring return, direct-coupled, low voltage actuator accepts on/off (SPDT), modulating (2-10 Vdc) or three-position control for air dampers, air handlers, ventilation flaps, louvers and ball valves. 2-10 Vdc spring return 44 lb-in., 5 Nm, direct coupled actuator   Overview Honeywell MS7405 44 lb-in. (5Nm), spring return, direct-coupled, low voltage actuator accepts on/off (SPDT), modulating (2-10 Vdc) or three-position control for air dampers, air handlers, ventilation flaps, louvers and ball valves. Features   Brushless DC submotor with electronic stall protection Self-centering shaft coupling for various shaft sizes For use with two-position, SPST, line- (Series 40) or low- (Series 80) voltage controls For use with floating or switched SPDT (Series 60) controls; use with proportional current or voltage (Series 70) controls Available with combined floating and modulating control in a single device and with an internal end switch Access cover facilitates connectivity and durable plastic housing features built-in mechanical end limits Field selectable spring return direction and shaft posi

MS7503A2030/U Floating or (0)2-10 Vdc, 27 lb-in spring return, direct coupled actuator Overview Honeywell MS7503 27 lb-in. (3Nm) torque, spring return, direct-coupled, line voltage actuator accepts on/off (SPDT) or modulating (0/2-10 Vdc) control for air dampers, air handlers, ventilation flaps, louvers and ball valves. Features   Brushless DC submotor with electronic stall protection Self-centering shaft coupling for various shaft sizes For use with two-position, SPST, line- (Series 40) or low- (Series 80) voltage controls For use with floating or switched SPDT (Series 60) controls; use with proportional current or voltage (Series 70) controls Available with combined floating and modulating control in a single device and with an internal end switch Access cover facilitates connectivity and durable plastic housing features built-in mechanical limits Field selectable spring return direction and shaft position indicator and scale UL listed (cUL), CE compliant and plenum rated per UL873   Product Specifications Application HVAC Dimensions (in.) 6 81/54 high x 3 55/84 wide x 3 5/32 deep Dimensions (mm)

Honeywell MS7510 88 lb-in. (10Nm) torque, spring return, direct-coupled, line voltage actuator accepts on/off (SPDT) or modulating (0/2-10 Vdc) control for air dampers, air handlers, ventilation flaps, louvers and ball valves. MS7510A2008/U Honeywell floating, 88 lb-in., 10 Nm spring return, direct-coupled actuator Overview Honeywell MS7510 88 lb-in. (10Nm) torque, spring return, direct-coupled, line voltage actuator accepts on/off (SPDT) or modulating (0/2-10 Vdc) control for air dampers, air handlers, ventilation flaps, louvers and ball valves. Features   Brushless DC submotor with electronic stall protection for floating/modulating models; brush DC submotor with electronic stall protection for two-position models Self-centering shaft coupling for various shaft sizes For use with two-position, SPST, line- (Series 40) or low- (Series 80) voltage controls For use with floating or switched SPDT (Series 60) controls; for use with proportional current or voltage (Series 70) controls Available with combined floating and modulating control in a single device, adjustable zero and span and with line-voltage internal end switches Access co

MS7520A2007/U Honeywell floating, 175 lb-in., 20 Nm spring return, direct-coupled actuator Overview Honeywell MS7520 175 lb-in. (20Nm) torque, spring return, direct-coupled, line voltage actuator accepts on/off (SPDT) or modulating (0/2-10 Vdc) control for air dampers, air handlers, ventilation flaps, louvers and ball valves. Features   Brushless DC submotor with electronic stall protection for floating/modulating models; brush DC submotor with electronic stall protection for two-position models Self-centering shaft coupling for various shaft sizes For use with two-position, SPST, line- (Series 40) or low- (Series 80) voltage controls For use with floating or switched SPDT (Series 60) controls; for use with proportional current or voltage (Series 70) controls Available with combined floating and modulating control in a single device, adjustable zero and span and with line-voltage internal end switches Access cover facilitates connectivity and metal housing features built-in mechanical end limits Field selectable spring return direction, shaft position indicator and scale, and manual winding capability with locking function UL list

MS8103 Honeywell MS8103 spring return, direct-coupled, line voltage actuator Honeywell two position or SPST, 27 lb-in., 3 Nm, direct-coupled actuator   Overview Honeywell MS8103 spring return, direct-coupled, line voltage actuator Features   27lb-in. (3Nm) torque Accepts two-position (SPST) control for air dampers, air handlers, ventilation flaps, louvers and ball valves.   Product Specifications Application HVAC Dimensions (in.) 6 81/54 high x 3 55/84 wide x 3 5/32 deep Dimensions (mm) 177 mm high x 98 mm wide x 80 deep Includes Mounting bracket, self-centering shaft adapter Weight (lb) 3.5 lb Weight (kg) 1.6 kg Materials Plenum rated plastic housing Mounting Direct Coupled Frequency 50 Hz; 60 Hz Approvals, Underwriters Laboratories Inc. UL 873 Electrical Connections Enclosed screw terminal strip (22 to 14 AWG) Operating Humidity Range (% RH) 5 to 95% RH, non-condensing Supply Voltage 24 Vac or Vdc Power Consumption Driving-- 6/3 VA Shipping and Storage Temperature Range (F) .-40 F to +150F Shipping and Storage Temperature Range (C) .-40 C to +65 C Ap

MS8104 The Honeywell MS8104 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). Fast-acting, two-position actuator with 30 lb-in., spring return   Overview The Honeywell MS8104 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation. Features   30 lb-in. (3.4 N•m) or 80 lb-in. (5.9 N•m) minimum driving torque at 350 F (176 C). Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation. Integral spring return ensures level of return torque. Fifteen-second spring return timing. No special cycling required during long-term holding. No audible noise during holding. Patent pending design eliminates need for limit switches to reduce power consumption. Models available for 24, 120, and 230 Vac. Ninety-five degree angle of rotation. Act

Honeywell MS8105 44 lb-in. (5Nm) torque, spring return, direct-coupled, line voltage actuator accepts two-position (SPST) control for air dampers, air handlers, ventilation flaps, louvers and ball valves.   MS8105A1008/U Honeywell two position or SPST, 44 lb-in., 5 Nm, direct-coupled actuator Overview Honeywell MS8105 44 lb-in. (5Nm) torque, spring return, direct-coupled, line voltage actuator accepts two-position (SPST) control for air dampers, air handlers, ventilation flaps, louvers and ball valves. Features   Brushless DC submotor with electronic stall protection for floating/modulating model Self-centering shaft coupling for various shaft sizes For use with two-position, SPST, line- (Series 40) or low- (Series 80) voltage controls For use with floating or switched SPDT (Series 60) controls; for use with proportional current or voltage (Series 70) controls Available with combined floating and modulating control in a single device and with an internal end switch Access cover facilitates connectivity and durable plastic housing features built-in mechanical end limits Field selectable spring return direction, shaft posit

MS8109 The Honeywell MS8109 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). MS8109F1010/U Fast-acting, two-position actuator with 80 lb-in., spring return MS8109F1210/U Fast-acting, two-position actuator with 80 lb-in., 2 aux. switches, spring return Overview The Honeywell MS8109 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation. Features   30 lb-in. (3.4 N•m) or 80 lb-in. (5.9 N•m) minimum driving torque at 350 F (176 C). Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation. Integral spring return ensures level of return torque. Fifteen-second spring return timing. No special cycling required during long-term holding. No audible noise during holding. Patent pending design eliminates need for limit switches to reduce

MS8120 Honeywell MS8120 175 lb-in. (20Nm) torque, spring return, direct coupled, line voltage actuator accepts two-position (SPST) control for air dampers, air handlers, ventilation flaps, louvers and ball valves. Honeywell two position or SPST, 175 lb-in., 20 Nm direct-coupled actuator   Overview Honeywell MS8120 175 lb-in. (20Nm) torque, spring return, direct coupled, line voltage actuator accepts two-position (SPST) control for air dampers, air handlers, ventilation flaps, louvers and ball valves. Features   Brushless DC submotor with electronic stall protection for floating/modulating models; brush DC submotor with electronic stall protection for two-position models Self-centering shaft coupling for various shaft sizes For use with two-position, SPST, line- (Series 40) or low- (Series 80) voltage controls For use with floating or switched SPDT (Series 60) controls; for use with proportional current or voltage (Series 70) controls Available with combined floating and modulating control in a single device, adjustable zero and span and with line-voltage internal end switches Access cover facilitates connectivity and metal housin

MS8120F1002/B Fast-acting, two-position actuator with 175 lb-in spring return and 24 Vac Overview Honeywell MS8120 175 lb-in. (20Nm) torque, spring return direct coupled, line voltage actuator accepts two-position (SPST) control for air dampers, air handlers, ventilation flaps, louvers and ball valves. Features   Brush DC submotor with electronic stall protection for two-position model Self-centering shaft coupling for various shaft sizes For use with two-position, SPST, line- (Series 40) or low- (Series 80) voltage controlsh Metal housing features built-in mechanical end limits Field selectable spring return direction, shaft position indicator and scale, and manual winding capability with locking function UL listed (cUL), CE compliant and plenum rated per UL873   Product Specifications Application Fire and Smoke Dimensions (in.) 10.67 in high x 3.94 in wide x 2.95 in deep Dimensions (mm) 271 mm high x 100 mm wide x 75 mm deep Includes Self-centering shaft adapter, 3mm crank Weight (lb) 8 lb Weight (kg) 3.63 kg Materials Aluminum housing Comments Two integral 3/8 in. flexible condui

MS8209F Honeywell MS8120F 80 lb-in. (9Nm) torque, spring return, direct-coupled, 24 Vac, CW actuator accepts two-position (SPST) control with an integral junction box. Reliably operates in smoke control systems requiring UL555S ratings up to 350F. Fast-Acting, Two-Position Actuator 80 lb-in, Spring Return CW, 24 Vac +20%, -10%   Overview Honeywell MS8120F,S 175 lb-in. (20Nm) torque, spring return direct-coupled, 24 Vac actuator accepts two-position (SPST) control with an integral junction box. Reliably operates in smoke control systems requiring UL555S ratings up to 350F. Features   Brush DC submotor with electronic stall protection for two-position model Self-centering shaft coupling for various shaft sizes For use with two-position, SPST, line- (Series 40) or low- (Series 80) voltage controlsh Metal housing features built-in mechanical end limits Field selectable spring return direction, shaft position indicator and scale, and manual winding capability with locking function UL listed (cUL), CE compliant and plenum rated per UL873   Product Specifications Application Fire and Smoke Dimensions (in.) 7

MS8309F Honeywell MS8309F 80lb-in. (9Nm) torque, spring return, direct-coupled, 24 Vac, CW actuator accepts two-position (SPST) control with an integral junction. Reliably operates in smoke control systems requiring UL555S ratings up to 350F. MS8309F1001/B Fast-Acting, Two-Position Actuator 80 lb-in Spring Return CCW, 24 Vac +20%, -10% MS8309F1001/U Fast-acting, two-position actuator with 80 lb-in., 9 Nm CCW spring return Overview Honeywell MS8120F 80 lb-in. (9Nm) torque, spring return direct-coupled, 24 Vac, CW actuator accepts two-position (SPST) control with an integral junction box. Reliably operates in smoke control systems requiring UL555S ratings up to 350F. Features   Integral spring return ensure return torque level Fifteen-second spring return timing No special cycling required and no audible noise during long-term holding Models available for 24, 120 and 230 Vac Ninety-five degree angle of rotation for tight damper closure Holds rated torque at reduced power level Die-cast aluminum housing design allows flush mounting to damper and eliminates need for limit switches to reduce power consumption Integral junction bo