SIEMENS pressure transmitter SITRANS T: the complete range of temperature measurement devices

SITRANS TR300 with HART- protocol is designed to support all commons, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with SIMATIC PDM or handheld communicator. Unique user-friendly details are implemented: Without opening the 4-20mA loop the output current can be read out directly with a multimeter. A red/green LED shows the technician the status at a glance. Detail  Input Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources  Output 4 to 20 mA, HART Benefits Measures temperature with a linear output signal High accuracy across entire ambient temperature range Reduces plant noise Alarm signal for sensor break or short-circuit according NAMUR 43 Electro magnetic compatibility (EMC) according DIN EN 61326 and NE21 Galvanic insulation for accuracy and safety in thermocouple applications Single- or dual-point trim Custom characteristic curve for application of non-standard sensors Difference- and average- measurement Extensive diagnosis: e.g. drag indicator and

SITRANS TW is a consistent further development of the hundred thousand times proven SITRANS T for the 4wire system in the mounting rail housing. Its many new functions set new standards in temperature transmitters. Its diagnostic and simulation functions provide the necessary clarity during commissioning and operation. Its HART®-interface makes the SITRANS TW easily adaptable to any measuring job with SIMATIC PDM. Physical values can be preset with the simulation function. This enables testing of the complete signal path right as far as the control system without the need for tools. The drag pointer functions measure the system’s process variable minimum and maximum. All SITRANS TW control room devices are available in non-intrinsically safe versions and intrinsically safe versions for applications under extreme conditions. Detail   Input                 Resistance thermometers, Thermocouples, Resistance-type sensors, DC sources, Current sources   Output          &nb

Delivery of complete tags for all applications Our wish is to meet your measuring point and sensor requirements, irrespective of the industry or application. We provide you with the necessary support and offer our wide depht of know-how. Selection of appropriate materials for thermowells and extensions Does your application include high temperatures, high pressures or corrosive media? Or are the temperature measurements made in rapidly flowing media? We will help you find the ideal solution. Whatever your process connections, whether flanged, screwed glands or welded, they are no problem to us. All common sensors Choose the sensor you need from a wide range of thermocouples or resistance thermometers. Of course we will also assemble suitable transmitters for you and adjust them to the sensor and measuring range you have ordered. It makes no difference at all whether you are measuring low or high temperatures or whether you use thermocouples or resistance thermometers- the SITRANS T family of transmitters are always a first-class partner.  To the top of the page

This temperature sensor line for sanitary applications provides a wide range of appropriate process connections for the classical temperature measurement. With the clamp-on temperature sensor Siemens breaks new ground. The benefits are particularly at small pipe diameters are the removal of welding and welding validation no disturbance of the process. Comparable accuracy and response time, despite piggability and simple demounting for recalibration. Output direct sensor signal 4…20 mA (TH100/TH200) HART (TH300) PA (TH400) FF (TH400) Max. operation temperature  -In the pipe: Clamp-on:   –30…+300 °C –20…+160 °C  Ingress Protection  IP65 (IP54 for some type of connection heads) Benefits Design according EHEDG-recommendations Inserts exchangeable For clamp-on: - No process disturbance   - Low cost of ownership for installation, validation and recalibration  

The TS Insert is used as a spare part for the SITRANS TS500 or as component to build up complete temperature assemblies. Deliverable in European design with ceramic terminal bloc, flying leads or mounted transmitter or in American design, build up spring-loaded in the extension. SITRANS TS Insert opens a wide field for individual solutions on customer site and ensures that the special know-how will be ensured on place. Output direct sensor signal 4…20 mA (TH100/TH200) HART (TH300) PA (TH400) FF (TH400)  Max. operation temperature     Pt 100 Basic: –30...+400 °C Pt 100 Extended: –196...+600 °C Thermocouple –196...+1100 °C (Depends on type of TC)  Ingress Protection  IP54-68, depend on type of connection head Output     direct sensor signal 4…20 mA (TH100/TH200) HART (TH300) PA (TH400) FF (TH400)    Max. operation temperature     Pt 100 Basic: –30...+400 °C Pt 100 Extended: –196...+600 °C Thermocouple –196...+1100 °C (Depends on type of TC)    Ingress Protection  IP54-68, depend on type of connection head    

The temperature sensor line is delivered with direct connected cable. With its construction based on mineral insulated cable (MIC) supports a wide range of applications. Due to compression fittings or soldering nipples the installation is simple and flexible. With the optional surface adapter the measuring of surface temperature are supported. The certificate for intrinsic safety allows the operation even in Zone 0 without the need of additional thermowell. This application grands an outstanding reaction time. Benefits Simple mounting with compression fitting or soldering nipples Universal use for a wide range of applications Variety due modular concept ATEX and IEC EX-approvals, designed for use in Zone 0  

The temperature sensor line is equipped with direct mount connectors (M12, Lemo usw.). With its construction based on mineral insulated cable (MIC) supports a wide range of applications. Due to compession fittings or soldering nipples the installation is simple and flexible. With the optional surface adapter the measuring of surface temperature are supported. The certificate for intrinsic safety allows the operation even in Zone 0 without the need of additional thermowell. This application grands an outstanding reaction time. Output direct sensor signal  Max. operaton temperature -measuring point   - cable end Pt 100 Basic: -30...+400°C Pt 100 Extended: -196...+600°C Thermo couple -196...+1100°C (Depends on type) -40°...+80°C Ingress protection  IP54 Benefits Universal use for a wide range of applications Variety due modular concept ATEX and IEC EX-approvals, designed for use in Zone 0

The industry-grade temperature sensor supports a wide range of measuring go from basic applications to solutions in harsh environment. A benefit for the user is the use of standard components even for individual configurations. This ensures the modular concept consisting of a barstock or tubular thermowell, extension and connection head with optional integrated transmitter or display. Version for intrinsic safety, flameproof and non sparking are available. Output direct sensor signal 4…20 mA (TH100/TH200) HART (TH300) PA (TH400) FF (TH400) Max. operation temperature*- measuring point:-connection head: Pt 100 Basic: –30...+400 °C  Pt 100 Extended: –196...+600 °C Thermocouple–196...+1100 °C (Depends on type of TC) Benefits Exchangeable during operation Wide application range due modular design Explosions protection according ATEX and IEC EX intrinsic safety, flameproof and non sparking With optional local indicator