Buschjost solenoid valve with differential pressure

6-fold high pressure solenoid valve   manifold DN 8   For compressed natural gas (CNG) Indirectly solenoid actuated Further customized solutions Piston valves available upon request! Consisting of:6 solenoid valves to control a dispenser with two lines (parallel filling of two cars)6 non return valves to avoid the inflow from higher pressure levels (e. g. High Bank) to lower pressure levels (e. g. Middle Bank) Description (standard valve) Switching function:  normally closed Flow direction:  determined Fluid temperature:  ¨C20 !aC up to max. +60 Ambient temperature:  ¨C20 !aC up to max. +50 Mounting position:  optional Material Valve manifold:  Brass Seat seal:  Polymer Internal parts:  Brass / Stainless steel / Polymer Internal leakage acc. to DIN EN 12266-1 Leakage rate "E" External leakage acc. to DIN EN 12266-1 Leakage rate "A" Installation of a 40 |ìm filter in front of the valve is required Characteristic data Valves Connection Part Number Nominal   Operating pressure (max. differential pressure) kv-value * Weight size Solenoid with 1 or 2 Diameter (mm) min. (bar)    

2/2-way valves DN 8 ¨C DN 5 For neutral gases and liquids Indirectly solenoid actuated Piston valves 85360 Internal threads G 1/4 to G 2 or 1/4 NPT to 2 NPT Operating pressure 0.5 to 40 bar 85370 Description (standard valve) Solenoid valve for air, water and other neutral fluids Switching function:  normally closed Flow direction:  determined Fluid temperature:  ¨C20 !aC !- max. +90 Ambient temperature:  ¨C20 !aC !- max. +50 Mounting position:  optional, preferably solenoid   vertical on top Material Body:  Brass (CW617N) Seat seal:  NBR Internal parts:  Stainless steel, Brass, PTFE / Carbon For contaminated fluids insertion of a strainer is recommended. FeaturesCompact build piston valveFunctional designHigh flow rateDamped operation via conePiston guided in PTFE ringsLong lifetimeSolenoid interchangeable without tools (c) Characteristic Data Valves Part Number Nominal Diameter Connection Size Operating Pressure * kv-value ** Weight Total Solenoid with 1 (mm) min. (bar) max. (bar) (Base m3/h) (kg) 8536000.9151 G 1/4   8 0.5 40 2.2 0.83 8537000.9151 1/4 NPT 8536100.9151 G 3/8 10 0.5 40 3.4 0.82 85371

2/2-way valves DN 8 ¨C DN 5 For neutral gases and liquids Indirectly solenoid actuated Piston valves 85360 Internal threads G 1/4 to G 2 or 1/4 NPT to 2 NPT Operating pressure 0.5 to 40 bar 85370 Description (standard valve) Solenoid valve for air, water and other neutral fluids Switching function:  normally closed Flow direction:  determined Fluid temperature:  ¨C20 !aC !- max. +90 Ambient temperature:  ¨C20 !aC !- max. +50 Mounting position:  optional, preferably solenoid   vertical on top Material Body:  Brass (CW617N) Seat seal:  NBR Internal parts:  Stainless steel, Brass, PTFE / Carbon For contaminated fluids insertion of a strainer is recommended. FeaturesCompact build piston valveFunctional designHigh flow rateDamped operation via conePiston guided in PTFE ringsLong lifetimeSolenoid interchangeable without tools (c) Characteristic Data Valves Part Number Nominal Diameter Connection Size Operating Pressure * kv-value ** Weight Total Solenoid with 1 (mm) min. (bar) max. (bar) (Base m3/h) (kg) 8536000.9151 G 1/4   8 0.5 40 2.2 0.83 8537000.9151 1/4 NPT 8536100.9151 G 3/8 10 0.5 40 3.4 0.82 85371

2/2-way valves DN 8 to DN 25 For neutral steam and liquids Indirectly solenoid actuated Piston valves Internal threads G 1/4 !- G 1 or 1/4 NPT !- 1 NP Operating pressure 1 !- 25 ba Description (standard valve) Solenoid valve for steam, hot water and other neutral fluids Switching function:  normally closed Flow direction:  determined Differential pressure:   1 bar required Fluid temperature:  0 !aC* up to max. +200 ! Ambient temperature:  0 !aC* up to max. +50 !aC with solenoid mounted vertical   underneath max. +60 !aC* * temperature <0?!aC on reques ** max. +55?!aC within the scope of cCSAu Mounting position:  optional, preferably solenoid   vertical on top Material Body:  Brass (CW617N) Seat seal:  PTFE Internal parts:  Stainless steel, FPM, PTFE For contaminated fluids insertion of a strainer is recommended. FeaturesCompact build piston valveFunctional designHigh flow ratePiston guided in PTFE ringsLong lifetimeSolenoid interchangeable without tools (c)Leakrate E acc. to DIN EN 12266-1 Characteristic Data Valves Operating Pressure * Part Number Nominal Diameter Connection Size k -value

2/2-way valves DN 8 to DN 25 For neutral steam and liquids Indirectly solenoid actuated Piston valves 85380 Internal threads G 1/4 !- G 1 or 1/4 NPT !- 1 NP Operating pressure 1 !- 25 ba 85390 Description (standard valve) Solenoid valve for steam, hot water and other neutral fluids Switching function:  normally closed Flow direction:  determined Differential pressure:   1 bar required Fluid temperature:  0 !aC* up to max. +200 ! Ambient temperature:  0 !aC* up to max. +50 !aC with solenoid mounted vertical   underneath max. +60 !aC* * temperature <0?!aC on reques ** max. +55?!aC within the scope of cCSAu Mounting position:  optional, preferably solenoid   vertical on top Material Body:  Brass (CW617N) Seat seal:  PTFE Internal parts:  Stainless steel, FPM, PTFE For contaminated fluids insertion of a strainer is recommended. FeaturesCompact build piston valveFunctional designHigh flow ratePiston guided in PTFE ringsLong lifetimeSolenoid interchangeable without tools (c)Leakrate E acc. to DIN EN 12266-1 Characteristic Data Valves Operating Pressure * Part Number Nominal Diameter Connection

Series:  84070 Description:  2/2-Way Solenoid valves Design:  With differential pressure Connection:  G 1/2 - G 3/4 Pressure:  0.3 - 10.5 bar Material:  PPO Series:  84080 Description:  2/2-Way Solenoid valves Design:  With differential pressure Connection:  NPT 1/2 - NPT 3/4 Pressure:  0.3 - 10.5 bar Material:  PPO 2/2-way-valves DN 15 to DN 50 For neutral gases and liquid fluids Indirectly solenoid actuated Piston valves Flange connection, pressure rating PN 40 Operating pressure 0.5 to 40 bar Description (standard valve) Solenoid valve for air, water and other neutral fluids Switching function:  normally closed Flow direction:  determined Fluid temperature:  ¨C20 !aC up to max. +90 Ambient temperature:  ¨C20 !aC up to max. +50 Mounting position:  optional, preferably solenoid   vertical on top Material Body:  Cast steel, Brass Seat seal:  NBR Internal parts:  Stainless steel, Brass, PTFE For contaminated fluids insertion of a strainer i

11-fold high pressure solenoid valve   manifold DN 15 For compressed natural gas (CNG) Further customized solutions Indirectly solenoid actuated available upon request! Piston valves Consisting of:3 solenoid valves to control the filling of the Low-, Middle- and High Bank6 solenoid valves to control a dispenser with two lines (parallel filling of two cars)2 solenoid valves as security valves in front of the dispenser9 non return valves to avoid the inflow from higher pressure levels (e. g. High Bank)   to lower pressure levels (e. g. Middle Bank) 2 additional non return valves for filling a car directly from the compressor via the dispenser (without needing to pre-fill the banks), necessary at highly frequented stations3 filters 40 |ì Description (standard valve) Switching function:  normally closed Flow direction:  determined Fluid temperature:  ¨C20 !aC up to max. +60 Ambient temperature:  ¨C20 !aC up to max. +50 Mounting position:  preferably,   with filter on the bottom side Material Valve manifold:  Brass Seat seal:  Polymer Internal parts:  Brass / Stainless steel / Polymer Internal leakage acc. t

11-fold high pressure solenoid valve   manifold DN 8   For compresses natural gas (CNG) Indirectly solenoid actuated Further customized solutions Piston valves available upon request! Consisting of:3 solenoid valves to control the filling of the Low-, Middle- and High-Bank6 solenoid valves to control a dispenser with two lines (parallel filling of two cars)2 solenoid valves as security valves in front of the dispenser9 non return valves to avoid the inflow from higher pressure levels (e. g. High Bank) to lower pressure levels (e. g. Middle Bank)2 additional non-return valves for filling a car directly from the compressor via the dispenser (without needing to prefill the banks), necessary at highly frequented stations3 filters 40 |ì Description (standard valve) Switching function:  normally closed Flow direction:  determined Fluid temperature:  ¨C20 !aC up to max. +60 Ambient temperature:  ¨C20 !aC up to max. +50 Mounting position:  preferably,   with filter on the bottom side Material Valve manifold:  Brass Seat seal:  Polymer Internal parts:  Brass / Stainless steel / Polymer Internal leakage acc. to DI

2/2-way high pressure solenoid valve DN 15 For compressed natural gas (CNG) Indirectly solenoid actuated   Piston valves Internal threads G 3/4 Further customized solutions Operating pressure 10 to 250 bar available upon request! Description (standard valve) Switching function:  normally closed Flow direction:  determined Fluid temperature:   Solenoid 9841   ¨C20 !aC up to max. +60   Solenoid 9186   ¨C20 !aC up to max. +60 Ambient temperature:   Solenoid 9841   ¨C20 !aC up to max. +50   Solenoid 9186   ¨C20 !aC up to max. +40 Mounting position:  preferably, with filter on the bottom side Material Valve manifold:  Brass Seat seal:  Polymer Internal parts:  Brass / Stainless steel / Polymer Internal leakage acc. to DIN EN 12266-1 Leakage rate "E" External leakage acc. to DIN EN 12266-1 Leakage rate "A" Characteristic data Valves   40 |ìm filter included in the inlet por Part Number Nominal   Connection size Operating pressure = max. differential pressure Weight Solenoid with 1 or 2 Diameter (mm) min. (bar)       

7-fold high pressure solenoid valve manifold DN 8   For compresses natural gas (CNG) Further customized solutions Indirectly solenoid actuated available upon request! Piston valves Consisting of:3 solenoid valves to control the filling of the Low-, Middle- and High-Bank3 solenoid valves to control a dispenser with one line1 solenoid valve as security valve in front of the dispenser6 non return valves to avoid the inflow from higher pressure levels (e. g. High Bank) to lower pressure levels (e. g. Middle Bank)2 additional non return valves for filling a car directly from the compressor via the dis- penser (without needing to pre-fil the banks), necessary at highly frequented stations 3 filters 40 |ì Description (standard valve) Switching function:  normally closed Flow direction:  determined Fluid temperature:  ¨C20 !aC up to max. +60 Ambient temperature:  ¨C20 !aC up to max. +50 Mounting position:  preferably,   with filter on the bottom side Material Valve manifold:  Brass Seat seal:  Polymer Internal parts:  Brass / Stainless steel / Polymer Internal leakage acc. to DIN EN 12266-1 Leakage rate "E" External l