Rodless cylinders

Models Standard, with slide bearings, with roller bearings, air supply from one or both sides, with standard or short carriage For sizes 50 - 63 roller bearings version is not available. Materials AL (anodized), plastic, hardened steel, seals: NBR, PU Operating temperature - 10°C ÷ + 70 °C Speed 10 ÷ 1000 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. If speeds exceed 1 m/s lubricated air is recommended. Bore size Ø 25 Ø 32 Ø 40 Ø 50 Ø 63 Operating pressure 1 ÷ 8 bar 1,5 ÷ 8 bar ( Ø 25 for "R" version ) Connection G1/8 (Ø 25; 32) G1/4 (Ø 40) G3/8 (Ø 50; 63) Cushioning length (mm) 14 mm - Ø 25 20 mm - Ø 32 25 mm - Ø 40 22 mm - Ø 50 32 mm - Ø 63 Strokes up to 6000 mm Code Title Type Operation Diameter (mm) 52G2P25A Cylinders with slide bearing Mod. 52G2P Rodless cylinders double-acting 25

Models Standard, with slide bearings, with roller bearings, air supply from one or both sides, with standard or short carriage For sizes 50 - 63 roller bearings version is not available. Materials AL (anodized), plastic, hardened steel, seals: NBR, PU Operating temperature - 10°C ÷ + 70 °C Speed 10 ÷ 1000 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. If speeds exceed 1 m/s lubricated air is recommended. Bore size Ø 25 Ø 32 Ø 40 Ø 50 Ø 63 Operating pressure 1 ÷ 8 bar 1,5 ÷ 8 bar ( Ø 25 for "R" version ) Connection G1/8 (Ø 25; 32) G1/4 (Ø 40) G3/8 (Ø 50; 63) Cushioning length (mm) 14 mm - Ø 25 20 mm - Ø 32 25 mm - Ø 40 22 mm - Ø 50 32 mm - Ø 63 Strokes up to 6000 mm Code Title Type Operation Diameter (mm) 52G8C25A Mod. 52G8C Rodless cylinders double-acting 25 52G8C32A Mod. 52G8C

Models Standard, with slide bearings, with roller bearings, air supply from one or both sides, with standard or short carriage For sizes 50 - 63 roller bearings version is not available. Materials AL (anodized), plastic, hardened steel, seals: NBR, PU Operating temperature - 10°C ÷ + 70 °C Speed 10 ÷ 1000 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. If speeds exceed 1 m/s lubricated air is recommended. Bore size Ø 25 Ø 32 Ø 40 Ø 50 Ø 63 Operating pressure 1 ÷ 8 bar 1,5 ÷ 8 bar ( Ø 25 for "R" version ) Connection G1/8 (Ø 25; 32) G1/4 (Ø 40) G3/8 (Ø 50; 63) Cushioning length (mm) 14 mm - Ø 25 20 mm - Ø 32 25 mm - Ø 40 22 mm - Ø 50 32 mm - Ø 63 Strokes up to 6000 mm Code Title Type Operation Diameter (mm) 52G8P25A Cylinders with slide bearing Mod. 52G8P Rodless cylinders double-acting 25

Models Standard, with slide bearings, with roller bearings, air supply from one or both sides, with standard or short carriage For sizes 50 - 63 roller bearings version is not available. Materials AL (anodized), plastic, hardened steel, seals: NBR, PU Operating temperature - 10°C ÷ + 70 °C Speed 10 ÷ 1000 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. If speeds exceed 1 m/s lubricated air is recommended. Bore size Ø 25 Ø 32 Ø 40 Ø 50 Ø 63 Operating pressure 1 ÷ 8 bar 1,5 ÷ 8 bar ( Ø 25 for "R" version ) Connection G1/8 (Ø 25; 32) G1/4 (Ø 40) G3/8 (Ø 50; 63) Cushioning length (mm) 14 mm - Ø 25 20 mm - Ø 32 25 mm - Ø 40 22 mm - Ø 50 32 mm - Ø 63 Strokes up to 6000 mm Code Title Type Operation Diameter (mm) 52M2C25A Cylinders with short carriage Mod. 52M2C Rodless cylinders double-acting 25

Models Standard, with slide bearings, with roller bearings, air supply from one or both sides, with standard or short carriage For sizes 50 - 63 roller bearings version is not available. Materials AL (anodized), plastic, hardened steel, seals: NBR, PU Operating temperature - 10°C ÷ + 70 °C Speed 10 ÷ 1000 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. If speeds exceed 1 m/s lubricated air is recommended. Bore size Ø 25 Ø 32 Ø 40 Ø 50 Ø 63 Operating pressure 1 ÷ 8 bar 1,5 ÷ 8 bar ( Ø 25 for "R" version ) Connection G1/8 (Ø 25; 32) G1/4 (Ø 40) G3/8 (Ø 50; 63) Cushioning length (mm) 14 mm - Ø 25 20 mm - Ø 32 25 mm - Ø 40 22 mm - Ø 50 32 mm - Ø 63 Strokes up to 6000 mm Code Title Type Operation Diameter (mm) 52M2P25A Cylinders with standard carriage Mod. 52M2P Rodless cylinders double-acting 25

Models Standard, with slide bearings, with roller bearings, air supply from one or both sides, with standard or short carriage For sizes 50 - 63 roller bearings version is not available. Materials AL (anodized), plastic, hardened steel, seals: NBR, PU Operating temperature - 10°C ÷ + 70 °C Speed 10 ÷ 1000 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. If speeds exceed 1 m/s lubricated air is recommended. Bore size Ø 25 Ø 32 Ø 40 Ø 50 Ø 63 Operating pressure 1 ÷ 8 bar 1,5 ÷ 8 bar ( Ø 25 for "R" version ) Connection G1/8 (Ø 25; 32) G1/4 (Ø 40) G3/8 (Ø 50; 63) Cushioning length (mm) 14 mm - Ø 25 20 mm - Ø 32 25 mm - Ø 40 22 mm - Ø 50 32 mm - Ø 63 Strokes up to 6000 mm

Models Standard, with slide bearings, with roller bearings, air supply from one or both sides, with standard or short carriage For sizes 50 - 63 roller bearings version is not available. Materials AL (anodized), plastic, hardened steel, seals: NBR, PU Operating temperature - 10°C ÷ + 70 °C Speed 10 ÷ 1000 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. If speeds exceed 1 m/s lubricated air is recommended. Bore size Ø 25 Ø 32 Ø 40 Ø 50 Ø 63 Operating pressure 1 ÷ 8 bar 1,5 ÷ 8 bar ( Ø 25 for "R" version ) Connection G1/8 (Ø 25; 32) G1/4 (Ø 40) G3/8 (Ø 50; 63) Cushioning length (mm) 14 mm - Ø 25 20 mm - Ø 32 25 mm - Ø 40 22 mm - Ø 50 32 mm - Ø 63 Strokes up to 6000 mm Code Title Type Operation Diameter (mm) 52M8P25A Cylinders with standard carriage Mod. 52M8P Rodless cylinders double-acting 25

Models Standard, with slide bearings, with roller bearings, air supply from one or both sides, with standard or short carriage For sizes 50 - 63 roller bearings version is not available. Materials AL (anodized), plastic, hardened steel, seals: NBR, PU Operating temperature - 10°C ÷ + 70 °C Speed 10 ÷ 1000 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. If speeds exceed 1 m/s lubricated air is recommended. Bore size Ø 25 Ø 32 Ø 40 Ø 50 Ø 63 Operating pressure 1 ÷ 8 bar 1,5 ÷ 8 bar ( Ø 25 for "R" version ) Connection G1/8 (Ø 25; 32) G1/4 (Ø 40) G3/8 (Ø 50; 63) Cushioning length (mm) 14 mm - Ø 25 20 mm - Ø 32 25 mm - Ø 40 22 mm - Ø 50 32 mm - Ø 63 Strokes up to 6000 mm Code Title Type Operation Diameter (mm) 52R2C25A Cylinders with Roller bearings Mod. 52R2C Rodless cylinders double-acting 25

Models Standard, with slide bearings, with roller bearings, air supply from one or both sides, with standard or short carriage For sizes 50 - 63 roller bearings version is not available. Materials AL (anodized), plastic, hardened steel, seals: NBR, PU Operating temperature - 10°C ÷ + 70 °C Speed 10 ÷ 1000 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. If speeds exceed 1 m/s lubricated air is recommended. Bore size Ø 25 Ø 32 Ø 40 Ø 50 Ø 63 Operating pressure 1 ÷ 8 bar 1,5 ÷ 8 bar ( Ø 25 for "R" version ) Connection G1/8 (Ø 25; 32) G1/4 (Ø 40) G3/8 (Ø 50; 63) Cushioning length (mm) 14 mm - Ø 25 20 mm - Ø 32 25 mm - Ø 40 22 mm - Ø 50 32 mm - Ø 63 Strokes up to 6000 mm Code Title Type Operation Diameter (mm) 52R2P25A Cylinders with Roller bearings Mod. 52R2P Rodless cylinders double-acting 25

Models Standard, with slide bearings, with roller bearings, air supply from one or both sides, with standard or short carriage For sizes 50 - 63 roller bearings version is not available. Materials AL (anodized), plastic, hardened steel, seals: NBR, PU Operating temperature - 10°C ÷ + 70 °C Speed 10 ÷ 1000 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. If speeds exceed 1 m/s lubricated air is recommended. Bore size Ø 25 Ø 32 Ø 40 Ø 50 Ø 63 Operating pressure 1 ÷ 8 bar 1,5 ÷ 8 bar ( Ø 25 for "R" version ) Connection G1/8 (Ø 25; 32) G1/4 (Ø 40) G3/8 (Ø 50; 63) Cushioning length (mm) 14 mm - Ø 25 20 mm - Ø 32 25 mm - Ø 40 22 mm - Ø 50 32 mm - Ø 63 Strokes up to 6000 mm Code Title Type Operation Diameter (mm) 52R8C25A Cylinders with Roller bearings Mod. 52R8C Rodless cylinders double-acting 25

Models Standard, with slide bearings, with roller bearings, air supply from one or both sides, with standard or short carriage For sizes 50 - 63 roller bearings version is not available. Materials AL (anodized), plastic, hardened steel, seals: NBR, PU Operating temperature - 10°C ÷ + 70 °C Speed 10 ÷ 1000 mm/sec (without load) Fluid filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. If speeds exceed 1 m/s lubricated air is recommended. Bore size Ø 25 Ø 32 Ø 40 Ø 50 Ø 63 Operating pressure 1 ÷ 8 bar 1,5 ÷ 8 bar ( Ø 25 for "R" version ) Connection G1/8 (Ø 25; 32) G1/4 (Ø 40) G3/8 (Ø 50; 63) Cushioning length (mm) 14 mm - Ø 25 20 mm - Ø 32 25 mm - Ø 40 22 mm - Ø 50 32 mm - Ø 63 Strokes up to 6000 mm Code Title Type Operation Diameter (mm) 52R8P25A Cylinders with Roller bearings Mod. 52R8P Rodless cylinders double-acting 25