SMC Air Grippers

Series MHR3, 3-finger gripper features high precision centering and high repeatability. A double acting rotary actuator and precision ball bearings permit smooth action without vibration. Mounting can be done from 3 directions; axial side, lateral side or vertical side. The MHR3 series is applicable for clean room class 10. Rotary actuated air gripper Three fingers Bore sizes: 10, 15 (mm) Six different switches in .5mm or 3mm lead wire lengths

The MHC gripper is ideal for use in applications requiring angular gripping. The opening angle ranges from 30 to -10 degrees. A double piston mechanism provides a large amount of gripping force, while maintaining a compact design. The MHC series has a built in speed adjustment and a recessed groove for auto switches. Angular style, compact, air gripper Large gripping force provided by the use of a double piston mechanism Action: double acting; single acting, normally open Bore sizes: ø10, ø16, ø20, ø25 Built-in variable throttle Auto switch capable

The MHC gripper is ideal for use in applications requiring angular gripping. The opening angle ranges from 30 to -10 degrees. A double piston mechanism provides a large amount of gripping force, while maintaining a compact design. The MHC series has a built in speed adjustment and a recessed groove for auto switches. Angular style, compact, air gripper Body thickness: 10mm Bore size: ø6mm Finger material: martensitic stainless steel Action: double acting; single acting, normally open Auto switch capable

The MHC gripper is ideal for use in applications requiring angular gripping. The opening angle ranges from 30 to -10 degrees. A double piston mechanism provides a large amount of gripping force, while maintaining a compact design. The MHC series has a built in speed adjustment and a recessed groove for auto switches. Angular style, compact, air gripper Short body Body thickness: 10mm Bore size: ø6mm Finger material: martensitic stainless steel Action: double acting; single acting, normally open

The MHC gripper is ideal for use in applications requiring angular gripping. The opening angle ranges from 30 to -10 degrees. A double piston mechanism provides a large amount of gripping force, while maintaining a compact design. The MHC series has a built in speed adjustment and a recessed groove for auto switches. Angular style, compact, air gripper Smallest size and lightest weight in the MHC series Body thickness: 10mm Bore size: ø7mm Finger material: martensitic stainless steel Action: single acting, normally open

The MHK2 series parallel gripper was designed to accommodate applications that require a high degree of accuracy in a wide range of environments. The finger action accuracy is accomplished through the use of a wedge cam mechanism, which allows repeat ability to +/-0.01mm and yields much higher axial load characteristics which permits use in insert press procedures. The gripper body is enhanced by a rear centering hole +/-0.1mm and two location pin holes with H9 tolerance. The MHK2 gripper is standard with a dust cover for protection against direct exposure to harsh environments (available in Chloroprene, Fluororubber, and Silicone Rubber) and has optional stainless steel fingers.

Series MHL air grippers are designed for applications that require a wide travel range of gripper fingers. The MHL is ideal for gripping many different sized parts. Finger motion is synchronized by a rack-and-pinion mechanism. The double piston construction creates a compact gripper with large holding force. Available in bore sizes 10, 16, 20, 25, 32 and 40. Axial mounting (tapped body or through hole) or lateral mounting options available. Auto switches can be integrally mounted. Wide opening air gripper Parallel style Applicable bore size: 10, 16, 20, 25, 32, 40 mm Opening/closing stroke range: 20-200 mm Auto switch capable

The series MHQJ2 offers specially designed dust covers that protect internal parts from contamination. Three boot materials are available for different applications. The standard rubber (CR) is for general-purpose applications. Fluororubber (FKM) is recommended when the gripper will be subjected to cutting oil, etc. A silicone rubber (Si) model is suitable for clean room and food industry applications. Switches can be integrally mounted. The MHQG2 is a parallel internal/external holding type gripper offered in a single or double acting model with a variety of finger mounting options. The MHQG2 is available in 32 and 40mm bore sizes, and is auto switch capable. Parallel internal/external holding type gripper High rigidity type Bore sizes (mm): 32, 40 (10-25 use MHZ2) Variety of options available Auto switches available

The series MHQJ2 offers specially designed dust covers that protect internal parts from contamination. Three boot materials are available for different applications. The standard rubber (CR) is for general-purpose applications. Fluororubber (FKM) is recommended when the gripper will be subjected to cutting oil, etc. A silicone rubber (Si) model is suitable for clean room and food industry applications. Switches can be integrally mounted. The MHQG2 is a parallel internal/external holding type gripper offered in a single or double acting model with a variety of finger mounting options. The MHQG2 is available in 32 and 40mm bore sizes, and is auto switch capable. Parallel type gripper w/dust cover Double acting; single acting types Bore sizes (mm): 10, 16, 20, 25 Number of fingers: 2 Auto switches available

Series MHR2 finger gripper features high precision centering and high repeatability. A double acting rotary actuator and precision ball bearings permit smooth action without vibration. Series MHR3 finger gripper features high precision centering and high repeatability. A double acting rotary actuator and precision ball bearings permit smooth action without vibration. Rotary actuated air gripper Two fingers Bore sizes: 10, 15, 20, 30 (mm)

Series MHR3, 3-finger gripper features high precision centering and high repeatability. A double acting rotary actuator and precision ball bearings permit smooth action without vibration. Mounting can be done from 3 directions; axial side, lateral side or vertical side. The MHR3 series is applicable for clean room class 10. Rotary actuated air gripper Three fingers Bore sizes: 10, 15 (mm)

The MHS is the latest in the family of rotary operated parallel style grippers. This compact gripper is available in 10 different bore sizes with choices of 2, 3 and 4 fingers which generate gripping forces up to 1270 N. Pinholes are incorporated as standard, facilitating accurate mounting which is achieved through either body tapped or through-hole mounting. By using a wedge cam construction to attach the fingers to the rotary actuator a more compact design is achieved, as well as high repeatability of 0.01 mm. Auto switches can be simply attached via the standard built-in grooves 2 finger parallel style air gripper Two fingers Bore sizes: 16, 20, 30, 32, 40, 50, 63 (mm) Thirteen different switches in .5mm or 3mm lead wire lengths

These grippers utilize a wedge cam design to minimize their size yet retains a high holding force. The small size of the units makes them well suited for end-of-arm or space constrained pick-and-place applications. The three-finger design of the MHS3 makes it ideal for gripping round objects and loading or unloading items from the chuck of a machine tool. 3 finger parallel style air gripper Three fingers Bore sizes: 16, 20, 30, 32, 40, 50, 63 (mm) Thirteen different switches in .5mm or 3mm lead wire lengths

These grippers utilize a wedge cam design to minimize their size yet retains a high holding force. The small size of the units makes them well suited for end-of-arm or space constrained pick-and-place applications. Round or square objects work well with the four-finger MHS4. 2 finger parallel style air gripper Four fingers Bore sizes: 16, 20, 30, 32, 40, 50, 63 (mm) Thirteen different switches in .5mm or 3mm lead wire lengths

These grippers utilize a wedge cam design to minimize their size yet retains a high holding force. The small size of the units makes them well suited for end-of-arm or space constrained pick-and-place applications. The three-finger design of the MHS3 makes it ideal for gripping round objects and loading or unloading items from the chuck of a machine tool. 3 finger gripper-through hole type Bore sizes 16mm to 80mm available Double acting Auto switch capable