Guided cylinders

Type of construction compact, non magnetic QXT = sintered bronze bushes - QXB = linear ball bearings Operation double-acting Materials body and flange = anodized AL QXT piston rod = stainless steel AISI 303 - QXB piston rod = hardened steel C50 seals = PU Mounting method by means of threaded holes Strokes from 10 to 100 Operating temperature 0° ÷ 80°C (with dry air - 20°C) Operating speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QXT3A016A010 Dimensions for Series QX with double flange QXT3A016A020 Dimensions for Series QX with double flange QXT3A016A030 Dimensions for Series QX with double flange QXT3A016A040 Dimensions for Series QX with double flange QXT3A016A050 Dimensions for Series QX with double flange QXT3A016A075 Dimensions f

Type of construction compact, non magnetic QXT = sintered bronze bushes - QXB = linear ball bearings Operation double-acting Materials body and flange = anodized AL QXT piston rod = stainless steel AISI 303 - QXB piston rod = hardened steel C50 seals = PU Mounting method by means of threaded holes Strokes from 10 to 100 Operating temperature 0° ÷ 80°C (with dry air - 20°C) Operating speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QXT3A032A010 Dimensions for Series QX with double flange QXT3A032A020 Dimensions for Series QX with double flange QXT3A032A030 Dimensions for Series QX with double flange QXT3A032A040 Dimensions for Series QX with double flange QXT3A032A050 Dimensions for Series QX with double flange QXT3A032A075 Dimensions f

Type of construction compact, non magnetic QXT = sintered bronze bushes - QXB = linear ball bearings Operation double-acting Materials body and flange = anodized AL QXT piston rod = stainless steel AISI 303 - QXB piston rod = hardened steel C50 seals = PU Mounting method by means of threaded holes Strokes from 10 to 100 Operating temperature 0° ÷ 80°C (with dry air - 20°C) Operating speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QXT3A010A010 Dimensions for Series QX with double flange QXT3A010A020 Dimensions for Series QX with double flange QXT3A010A030 Dimensions for Series QX with double flange QXT3A010A040 Dimensions for Series QX with double flange QXT3A010A050 Dimensions for Series QX with double flange QXT3A010A075 Dimensions f

Type of construction compact, non magnetic QXT = sintered bronze bushes - QXB = linear ball bearings Operation double-acting Materials body and flange = anodized AL QXT piston rod = stainless steel AISI 303 - QXB piston rod = hardened steel C50 seals = PU Mounting method by means of threaded holes Strokes from 10 to 100 Operating temperature 0° ÷ 80°C (with dry air - 20°C) Operating speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QXT3A025A010 Dimensions for Series QX with double flange QXT3A025A020 Dimensions for Series QX with double flange QXT3A025A030 Dimensions for Series QX with double flange QXT3A025A040 Dimensions for Series QX with double flange QXT3A025A050 Di

Type of construction compact, non magnetic QXT = sintered bronze bushes - QXB = linear ball bearings Operation double-acting Materials body and flange = anodized AL QXT piston rod = stainless steel AISI 303 - QXB piston rod = hardened steel C50 seals = PU Mounting method by means of threaded holes Strokes from 10 to 100 Operating temperature 0° ÷ 80°C (with dry air - 20°C) Operating speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QXT2A010A010 Dimensions for Series QX with single flange QXT2A010A020 Dimensions for Series QX with single flange QXT2A010A030 Dimensions for Series QX with single flange QXT2A010A040 Dimensions for Series QX with single flange QXT2A010A050 Dimensions for Series QX with single flange QXT2A010A075 Dimensions f

Type of construction compact, non magnetic QXT = sintered bronze bushes - QXB = linear ball bearings Operation double-acting Materials body and flange = anodized AL QXT piston rod = stainless steel AISI 303 - QXB piston rod = hardened steel C50 seals = PU Mounting method by means of threaded holes Strokes from 10 to 100 Operating temperature 0° ÷ 80°C (with dry air - 20°C) Operating speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QXT2A020A010 Dimensions for Series QX with single flange QXT2A020A020 Dimensions for Series QX with single flange QXT2A020A030 Dimensions for Series QX with single flange QXT2A020A040 Dimensions for Series QX with single flange QXT2A020A050 Dimensions for Series QX with single flange QXT2A020A075 Dimensions f

Type of construction compact, non magnetic QXT = sintered bronze bushes - QXB = linear ball bearings Operation double-acting Materials body and flange = anodized AL QXT piston rod = stainless steel AISI 303 - QXB piston rod = hardened steel C50 seals = PU Mounting method by means of threaded holes Strokes from 10 to 100 Operating temperature 0° ÷ 80°C (with dry air - 20°C) Operating speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QXT2A025A010 Dimensions for Series QX with single flange QXT2A025A020 Dimensions for Series QX with single flange QXT2A025A030 Dimensions for Series QX with single flange QXT2A025A040 Dimensions for Series QX with single flange QXT2A025A050 Dimensions for Series QX with single flange QXT2A025A075 Dimensions f

Type of construction compact guided QCT = sintered bronze bushes QCB = linear ball bearings Operation double-acting Materials body = anodized AL flange = zinc-plated steel piston rod = rolled stainless steel AISI 303 QCT columns = rolled stainless steel 420B QCB columns = hardened steel C50 seals = PU Mounting threaded and non-threaded holes in the body Strokes min. max see table Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QCB2A020A020 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A020A030 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A020A040 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A020A050 QCB - total length (L3), projection (B) and columns Ø (C)

Type of construction compact guided QCT = sintered bronze bushes QCB = linear ball bearings Operation double-acting Materials body = anodized AL flange = zinc-plated steel piston rod = rolled stainless steel AISI 303 QCT columns = rolled stainless steel 420B QCB columns = hardened steel C50 seals = PU Mounting threaded and non-threaded holes in the body Strokes min. max see table Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QCB2A025A020 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A025A030 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A025A040 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A025A050 QCB - total length (L3), projection (B) and columns Ø (C)

Type of construction compact guided QCT = sintered bronze bushes QCB = linear ball bearings Operation double-acting Materials body = anodized AL flange = zinc-plated steel piston rod = rolled stainless steel AISI 303 QCT columns = rolled stainless steel 420B QCB columns = hardened steel C50 seals = PU Mounting threaded and non-threaded holes in the body Strokes min. max see table Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QCB2A032A025 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A032A050 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A032A075 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A032A100 QCB - total length (L3), projection (B) and columns Ø (C)

Type of construction compact guided QCT = sintered bronze bushes QCB = linear ball bearings Operation double-acting Materials body = anodized AL flange = zinc-plated steel piston rod = rolled stainless steel AISI 303 QCT columns = rolled stainless steel 420B QCB columns = hardened steel C50 seals = PU Mounting threaded and non-threaded holes in the body Strokes min. max see table Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QCB2A040A025 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A040A050 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A040A075 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A040A100 QCB - total length (L3), projection (B) and columns Ø (C)

Type of construction compact guided QCT = sintered bronze bushes QCB = linear ball bearings Operation double-acting Materials body = anodized AL flange = zinc-plated steel piston rod = rolled stainless steel AISI 303 QCT columns = rolled stainless steel 420B QCB columns = hardened steel C50 seals = PU Mounting threaded and non-threaded holes in the body Strokes min. max see table Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QCB2A050A025 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A050A050 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A050A075 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A050A100 QCB - total length (L3), projection (B) and columns Ø (C)

Type of construction compact guided QCT = sintered bronze bushes QCB = linear ball bearings Operation double-acting Materials body = anodized AL flange = zinc-plated steel piston rod = rolled stainless steel AISI 303 QCT columns = rolled stainless steel 420B QCB columns = hardened steel C50 seals = PU Mounting threaded and non-threaded holes in the body Strokes min. max see table Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QCB2A063A025 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A063A050 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A063A075 QCB - total length (L3), projection (B) and columns Ø (C) QCB2A063A100 QCB - total length (L3), projection (B) and columns Ø (C)

Type of construction compact guided QCT = sintered bronze bushes QCB = linear ball bearings Operation double-acting Materials body = anodized AL flange = zinc-plated steel piston rod = rolled stainless steel AISI 303 QCT columns = rolled stainless steel 420B QCB columns = hardened steel C50 seals = PU Mounting threaded and non-threaded holes in the body Strokes min. max see table Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QCT2A020A020 QCT - total length (L3), projection (B) and columns Ø (C) QCT2A020A030 QCT - total length (L3), projection (B) and columns Ø (C) QCT2A020A040 QCT - total length (L3), projection (B) and columns Ø (C) QCT2A020A050 QCT - total length (L3), projection (B) and columns Ø (C)

Type of construction compact guided QCT = sintered bronze bushes QCB = linear ball bearings Operation double-acting Materials body = anodized AL flange = zinc-plated steel piston rod = rolled stainless steel AISI 303 QCT columns = rolled stainless steel 420B QCB columns = hardened steel C50 seals = PU Mounting threaded and non-threaded holes in the body Strokes min. max see table Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 bar Fluid clean air, non lubricated. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Code Title QCT2A025A020 QCT - total length (L3), projection (B) and columns Ø (C) QCT2A025A030 QCT - total length (L3), projection (B) and columns Ø (C) QCT2A025A040 QCT - total length (L3), projection (B) and columns Ø (C) QCT2A025A050 QCT - total length (L3), projection (B) and columns Ø (C)